Enquire Now
Price includes full world cruising specification.
The Kraken Standard
When it comes to equipment specification we’re raising the standard here too. All Kraken’s come loaded with the equipment we know you’ll want and need.
All other boat builder’s ‘standard’ will require the owner to add another 20-40% to the cost of the boat to bring it up to a reasonable specification for the task of world cruising.
At Kraken, our standard means you’ve already got everything and you don’t need to spend another Dollar, Euro or Pound to sail off the delivery dock to anywhere in the world.
Here's just some of the equipment you get, you’d never expect as standard
Hover over an item for more information on the features included with our Full World Cruising Specification, standard on every Kraken. To see everything included, check out the full specification at the link below.
Select an item for more information on the features included with our Full World Cruising Specification, standard on every Kraken. To see everything included, check out the full specification at the link below.
Kohler generator including sound shield for quiet operation
Webasto diesel heating system throughout all cabins.
This tank to tank fuel polishing and transfer system eliminates contaminate from all fuel tanks.
Dual headsail Solent rig for easy handling and performance at all points of sail. The ultimate long-distance cruising rig.
Kraken dingy davits with electric operation, made from Stainless steel.
Fully gimballed, GN Espace OceanChef 3 electric induction hob and oven.
Provides a far superior level of monitoring and capacity to set alarms and bespoke equipment and lighting requirements.
Full electronic package for both external and internal navigation stations: Garmin Autopilot station x 2, Garmin 9” screen GPS plotter/multifunction displays x 2, Garmin VHF radios x 2, Garmin wind, speed depth sounder x 2
5000 lts per hour bilge pump and sensor in the main bilge to prevent build-up of water in emergency water ingress situations.
Solas offshore flare pack
Veco Frigomar Full tropical air-conditioning system.
Hydromaster Watermaker.
Side Power 24V tunnel bow thruster.
Viking liferaft sized to suit your yacht size and layout.
Highfield Aluminium/Hyperlon Rib Yamaha outboard motor.
Soft top, tubular stainless steel bimini with Ferrari Stamoid top. Includes removable forward panels, fitted bimini lights and additional flexible screens to fully enclose the cockpit.
All six Harken cockpit winches are two speed electric and manual operation.
Stripper dual blade rope and weed cutter on prop shaft.
Textilene and open cell ‘stay dry’ cockpit cushions throughout cockpit
Stainless steel fish bone swim and diving ladder to swim platform at stern.
6 x size 8 inflated fender plus 4 x 15m and 2 x 10m 22m polyester mooring lines
Equipment you get, you’d never expect as standard
Design specification.
Click the button below for a full, detailed specification of the Kraken 50.
- Length Overall 50 ft
- Waterline Length 44.86 ft
- Beam Overall 14.76 ft
- Beam Waterline 12.47 ft
- Draft 7.54 ft
- Air Draft 81.35 ft
- Displacement 41,888 lbs
- Ballast Weight 14,330 lbs
- Ballast Ratio 34.2%
- Sail Area 1444.52 sq.ft
- Sail Area Displacement Ratio 19.2
- Engine Power 80 HP
- Fuel Tanks (3 tanks) 223 us gal
- Water Tanks (2 tanks) 148 us gal
- CE Certification RCD Category 'A' Ocean
- Length Overall 15.24 m
- Waterline Length 13.68 m
- Beam Overall 4.50 m
- Beam Waterline 3.80 m
- Draft 2.30 m
- Air Draft 24.80 m
- Displacement 19,000 kg
- Ballast Weight 6,500 kg
- Sail Area 134.2 sq.m
- Engine Power 59 kW
- Fuel Tank 845 L
- Fresh Water Tanks 560 L
Build Specification
10 features included with every kraken, one piece hull and integral zero keel.
All Kraken’s comprise of a one piece hull and integral Zero Keel which houses a sealed lead ballast bulb.
The hull lay up is built using 17-22 layers of composite engineered fabrics bonded together by vinyl-ester resins. The general hull thickness is a minimum of 15mm. Aramid fibre composites (Kevlar) is also used in all impact areas, the bow stem, the front of the keel and the keel base.
The hull topsides incorporate 25mm closed cell foam, the FRP foam sandwich which extends from 40cm (16″) above the waterline to deck level. This structure improves insulation and overall hull form rigidity. A Kraken’s hull and structures exhibited no flexing.
ALPHA™ Rudder System
The rudder and steering system is the most vulnerable element of any yacht, in recognition of this, the Kraken engineering and design team have developed the world’s safest rudder and steering system.
The rudder is fully protected and supported by a full length skeg with an integral stainless steel beam, which has at its foot the first rudder bearing. The 3 ¾” (82mm) rudder stock has a second (main) bearing at its centre as it passes into the hull at the transom. This bearing is accessible and removable from the inside of transom. Even at sea!
The rudder stock has a removable third bearing at the top inside the stern lazarette. The rudder itself, comprises an integral stainless steel armature, which is welded to the stainless steel rudder stock. It is then finished and faired using FRP/vinyl-ester.
Solid crash zone at bow waterline
A heavily reinforced ‘solid crash zone’ below the anchor chain locker, incorporating high density closed cell foam with substantial reinforcements in aramid fibres extends from above the waterline to 40cm below it. This solid area runs through to the first sealed bulkhead providing maximum collision protection.
Structural frames and stringers
All longitudinal and latitudinal structures are individually bonded in during the hull layup stages with no prefabricated structural components . The video below explains how the structural frames and stringers work on a Kraken Yacht.
All bulkheads are vacuum infused FRP with 25mm structural foam core. No plywood is used. There are two watertight sealed bulkheads forward, one between the anchor locker and the forward lazarette and a second one between the forward lazarette and the interior. A further watertight, sealed bulkhead at the stern divides the interior from the aft lazarette.
The structural bulkheads are fully bonded into the hull stringers & frames.
Deck Structure
The deck is vacuum infused FRP using composite fibres and vinyl-ester resin with a structural foam core. This provides high levels of rigidity and insulation.
The deck structure is single-skin FRP around the base of all deck fittings.
The outside finish of the deck is panelled non-slip gelcoat with Flexiteek side decks and cockpit sole as standard.
Integral Kraken moulded safety bulwark
All Kraken have an Integral moulded safety bulwark with concave internal surface for superior deck safety at sea.
Saloon/coach roof windows
Ultra-high impact-resistant laminated glass is used in the wrap-around saloon windows and port lights so that accidental damage will not result in water ingress to the interior.
Hull Finishes
Standard hull gelcoat colour is Signal White. Many colour options available at owners choice.
Double line boot top in Alwgrip to owners colour choice.
3 x coats of primer and sealer applied below the waterline before standard antifoul in dark grey, other colour choices available.
Build standard and certification
All Kraken’s are designed and built to exceed ISO CE RCD Category ‘A’
Part 2 - Galley Interior Walkthrough
Part 3 - Cabins Interior Walkthrough
Part 4 - Walk-in Engine Room Interior Walkthrough
Key Features
All of our yachts include some of the best-designed features available on a new sailing yacht today and the Kraken 50 is no different.
The Zero Keel™
Zero bolts, zero risk. Each Kraken yacht includes our fully integral ZERO™ Keel to protect against floating debris and grounding.
The Alpha Rudder™
Each yacht includes the ALPHA™ Rudder System, incorporating a full-length skeg-hung rudder and in-water removable rudder bearings.
Build Structure
All Kraken yachts are built with a substantial interior structure to ensure keel delamination and failure cannot occur.
The Exterior
Test Sail Skymark
Solent Rig Butterfly
Deck Walkthrough Part 1
Deck Walkthrough Part 2
Deck Walkthrough Part 3
We have 4, 5 and 6 berth layouts are available.
More From Kraken
© All rights reserved Kraken Yachts 2024
Designed & created by Oncrowd
- Length Overall 44 ft
- Beam Overall 12.54 ft
- Draft 6.58 ft
- Sail Area 1099.5 sq.ft
- Length Overall 58 ft
- Beam Overall 17.06 ft
- Sail Area 1946.54 sq.ft
- Length Overall 66 ft
- Beam Overall 18 ft
- Draft 8.7 ft
- Sail Area 2322 sq.ft
In The Yard
Take an exclusive look behind the scenes at what goes into the building of a Kraken yacht, not just the finished article.
Crafted For You
Kraken owners group.
Experience all the extra benefits of Kraken ownership with our online owners’ portal including access to our crew finder.
Kraken Yachts
Kraken design.
The Zero Keel is part of the hull and it can never come off. There are no bolts used anywhere in the construction of the keel or hull.
This comprises four unique features which hugely improve the crews ability to continue steering throughout circumstances that would disable most other yachts.
Ocean Sailor
The Ocean Sailor Podcast is a blue water cruising chat show. Our hosts, the two Dicks (Durham and Beaumont), explore blue water sailing topics.
Ocean Sailor Magazine was a monthly magazine created by Kraken Yachts and launched in January 2020.
With eight categories to choose from including tails of the sea, sailing skills and even great recipes for cooking in your galley, there are hours of reading to enjoy and learn with Ocean Sailor articles.
You can fill our enquiry form for information on prices, delivery dates, options and upgrades. A member of our sales team will be in contact with you shortly.
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.
Berthon Winter Collection
Latest issue
August 2024
In the August 2024 issue of Yachting World magazine: News Few finish a tempestuous Round The Island Race European rules are eased for cruising to France and Greece Olympic sailing…
Yachting World
- Digital Edition
Kraken 66 test: Could this be the ultimate ocean cruising yacht?
- Toby Hodges
- September 5, 2019
What would you want in an ultimate ocean cruising yacht? Here’s Kraken’s answer
Product Overview
Manufacturer:, price as reviewed:.
“If you don’t like the weather in Cape Town, wait ten minutes,” is an adage the local skipper of the first Kraken 66 told us as we set sail. Thankfully, we had a good couple of days to test White Dragon , sailing around the stunning Cape Peninsula – but he was right about the ‘variable’ conditions. It would change from intense heat without a breath of wind one minute to an unsettling dense mist and cold Force 5 the next.
We’d chosen the ideal location to do a proper boat test on a bluewater cruiser built by a new brand with the specific requirement to be able to sail anywhere safely and comfortably. Still, as the first day passed, the conditions felt a little benign compared with the legendary Cape Doctor reputation.
As we awoke off Simon’s Town on the second morning, however, the wind was already whistling off the mountains. By the time we’d breakfasted, readied the boat and shipped the anchor, 45-knot gusts were already ripping the tops off any swell trying to make its way into False Bay. I smiled: we were going to get the very conditions we had come all this way for, to test the boat in the winds she was bred to handle.
Relatively low topsides maintain elegant hull lines. To gain interior volume a high coachroof and a camber to the foredeck is used
Thankfully, this first Kraken had already done more than enough to instil confidence in its abilities. Kraken yachts have integral keels, full-length, skeg-hung rudders and capacious tanks for long-term cruising. It may take belt and braces to a new level, but, as I was to discover, there is a host of good ideas and a lifetime of experience poured into this yacht that many can learn from.
Whether or not they suit your type of sailing is another matter – but I found myself swept along by the profusion of practical features, the majority born out of hard-earned sailing miles by Kraken’s founder Dick Beaumont.
What is Kraken?
Kraken is a Hong Kong-based brand, run by British sailors building yachts in China designed by New Zealander Kevin Dibley. Construction is subcontracted to a yard in Xiamen, which already builds boats for a number of brands including Passport Yachts.
Kraken founder Dick Beaumont at White Dragon ’s wheel chatting to YW’s Toby Hodges
We tested its first boat and model, a Kraken 66 built for Beaumont, who clocked over 100,000 miles aboard his previous 58ft Tayana . “I made a book entitled ‘If I ever have another boat, do this’,” he explained. “That book became three books and, when grandchildren came along, I had the chance and desire to apply those lessons.”
When we joined him in Cape Town Beaumont had already sailed White Dragon 12,000 miles from China en route to exhibit the boat in Europe.
Local greeting
“Here is a boat that fills you with confidence”
Motoring out of a breathless and sweltering V&A Marina in central Cape Town, we immediately met the changeable conditions we were warned about.
Heading south along the western side of the cape, we were hit by a 15-knot onshore breeze, which was so much colder and so sudden that we wondered if the dozens of paragliders flying down from Table Mountain would land safely before it hit land.
Yet as soon as our sails were hoisted and trimmed, the breeze would die away or switch to an opposite direction. It was the start of a long day of frustrating conditions involving motoring and sailing spells, but the tour around the coastline of one of the world’s great Capes proved a good chance to learn more about the design and features of the Kraken 66.
It’s a fairly traditional centre-cockpit design inside and out, which eschews modern design trends in preference for a raked bow and relatively narrow transom.
The bow is shaped to prevent it from burying in seas and reduce slamming. Combined with the yacht’s loaded displacement, it certainly gave a smooth and steady motion when we ploughed through sharp waves upwind in a gale. The tucked-in stern sections, meanwhile, are to prevent the boat planing in waves.
Keels are a big topic for Kraken yachts. “The answer to the question ‘what do I do to stop my keel bolts coming off?’ is ‘don’t have any bolts’,” says Beaumont. Kraken firmly believes that having a rigid structure bolted into a flexible hull is a structural flaw.
The Kraken 66 has a total sail area of 214.7m2
The ‘Zero keel’ is its solution, a bulb- shaped keel that is integral to the hull – bonded securely with the hull and keel laminates, with no bolts needed (zero bolts mean zero chance of separation).
Integrating the keel into the hull mould is an innovative, though expensive, technique. Lead ballast casting is inserted into the lower section of the keel and enclosed within the single-piece hull moulding before the frames and stiffeners are installed.
White Dragon has an integral keel, but still uses bolts. The decision to use only Zero keels for all future Krakens means the company is building a new mould for subsequent 66s.
Following a two-mile excursion off the Cape to watch the Atlantic rollers explode onto the frighteningly exposed Bellows Rock, we unfurled sails again to round the point and venture up the eastern side of the peninsula.
White Dragon has an upgraded sail and rig package, with carbon Southern Spars mast and in-boom furling system. We made between 6.5 and 7 knots reaching in what I guestimate to be around 10–12 knots across the deck (the instruments were faulty and did not show true wind).
Article continues below…
Baltic 67 review: Finnish superyacht yard goes back to its roots with no-compromise cruiser
Were money no object and you wanted the ultimate yacht for long-term cruising, what would you choose? How large could…
CNB 66 yacht test: Intoxicating cruiser is a cut above the mainstream
Congratulations. You’ve finally received that hefty bonus. Or perhaps you cashed in your pension, married wisely, or are a successful…
Power of hydraulics
It should have been just enough of a breeze and an ideal angle to get a feel for the boat, but the Kraken’s hydraulic steering denies sailors the feedback that they rely on and relish. It’s a peculiar choice for this size of yacht, though cable steering does actually come as standard.
Hydraulic power is used wherever practical aboard White Dragon for reliability and to limit any reliance on electric motors. Hydraulic winches and furlers also make it easier for one person to control sail operations remotely from the helm.
The raised single helm station provides good visibility, but it is very central, so it can be tricky to view telltales. The helmsman can reach out from here to trim the three winches for sheets and traveller, however.
When the wind died again, we motored on at 2,200rpm making 7.8 knots. In a 24-hour period using genset and engine, the Kraken 66 consumes about 13lt per hour at this speed, reported Beaumont, down to 10lt per hour at 2,000rpm.
A deck locker for diesel fillers with raised caps to help prevent spillage
With nearly two tonnes of fuel tank capacity, that equates to a significant motoring range. “In remote places where you may not be able to get good fuel, it makes a big difference if you can run for two or three weeks,” he told me.
Brunton’s variable-pitch propellers and Sigmadrive flexible couplings are used for optimum fuel consumption and vibration reduction, together with the latest common rail Yanmar diesels for efficiency and reliability.
Every Kraken also has two main tanks that transfer to a day tank. This running tank cannot be filled directly from the dock – fuel has to go through the Racor fuel polishing system first to prevent dirty fuel getting through to the engine.
“Seventy-five per cent of the failures on my previous boat were fuel related,” Beaumont reports (the rest were to do with electric motors). “So we have ensured you’ll never have impure fuel – that’s what turns beautiful places into misery.”
Gale force sailing
Not many people go sailing in a full gale – not on purpose anyhow. On the morning of our second day aboard, we headed out into a Force 8 rising to a Force 9 to test the Kraken’s mettle and behaviour.
We unfurled the main, leaving plenty in the boom, equivalent to around two and a half reefs, and half the genoa. The apparent wind rose from a steady 35 up to 55 knots during our sail. The boat coped admirably, in its element even, as we fetched at 60-80° to the apparent wind averaging 8.5-9 knots. Even with this conservative sail area it was enough to induce a fair amount of load on the hydraulic steering and 7-10° of rudder angle.
Running rigging (and jib sheets) lead neatly to a bank of high-load jammers aside the cockpit
It didn’t feel quite in tune. I was keen to swap to the staysail, to use a fuller foresail with better shape and potential drive – and indeed, when we switched, White Dragon instantly felt happier. We still left three to four rolls on the staysail furler, but were then able to punch higher upwind at around 50°A in a consistent 45-53 knots, without losing any speed.
The Kraken tracked well, with a stable motion. Although the steering connection still felt alien, the load on the wheel helped relay the forces exerted on the boat to the helm. In all, it was a competent and distinctly reassuring display. Here is a boat that fills you with the confidence to consider sailing in such conditions.
Heavy-duty winches and Spinlock high-load jammers hint at the displacement and loads of this design – in the loaded condition we experienced, White Dragon weighed around 45 tonnes.
The traveller is well positioned within reach of the helmsman, but the raised cheek blocks on each quarter look awkward, combined with a genoa track that is too long. On future models the track will be on the capping rail, which should then improve the genoa lead and block placements.
The comfortable U-shaped saloon and proper pilot station
The cockpit is generous in size with a long table, but has angular benches with low backrests, which aren’t particularly comfortable and would benefit from the addition of quality cushions. Again the emphasis on safety stands out. Huge drains will reportedly empty a flooded cockpit in four seconds.
The liferaft locker is directly abaft the companionway, a position that Beaumont believes makes most sense if mustering in an emergency. And rather than using one hefty 12-person raft, two six-person rafts are stowed in here, to provide a spare and because their smaller size makes them easier to manhandle.
Extra water and fishing gear is stashed beneath the rafts and there is a grab bag locker under the companionway steps. The locker itself can also be removed in case there is ever a need to hoist out the engine.
Heated wet gear locker has a chair adjacent to make it easier to get into and out of your foulies
Practicalities below
Step below and you gain an immediate feel of solidity, which only increases with time spent aboard. Once more, intelligent features abound that are born out of experience.
To port there is a chair for perching on to remove foul weather gear, beside a heated wet weather locker. It’s a format that encourages you to do things in an orderly and seamanlike fashion – to keep your foulies and lifejacket together, away from the cabins, and to dry them ready for your next watch.
Moving forward, a swivelling pilot chair at the forward-facing navstation gives clear visibility over the foredeck and views of the rig through a hatch situated above. The remote engine throttle and autopilot control mounted here make this a viable position to stand watch in inclement weather.
The U-shaped deck saloon has a table that lowers at the push of a button, either right down to form a huge bed or children’s den, or partially to act as bracing to a pilot berth.
The real appeal of the Kraken 66’s layout for me, though, is in what lies beneath the saloon. The amount of tankage and machinery space is simply astonishing. A door abaft the saloon leads into a corridor of engineering, larger and more comprehensive than aboard any yacht I’ve seen below 90ft, with walkthrough access to two gensets, a dive compressor, DC hydraulic plant, aircon, and a hydraulic watermaker that produces 240lt per hour.
A bank of heavy-duty Racor fuel filters is mounted on the aft bulkhead and below the sole are the three main sea-chests (two for the main engine in case one gets fouled). Every pipe is clearly labelled. An ultra high-volume pump is mounted 3in higher than the bilge pumps, which only activates – together with a siren – in serious flooding.
There is also access under the central saloon sole forward to a compartment that houses a captive winch for the main halyard. There’s an emergency stop button for the hydraulics here, and on the cockpit pedestal.
The passageway galley is ideally laid out for use at sea
A huge battery bank of 1,040Ah at 24V meant we could cook silently all evening at a power drain of just four per cent. Up to 9kW can be drawn from the inverters alone – enough to run aircon in the tropics. And White Dragon has serious power backups in two generators and a power take off on the main engine.
The woodwork is satin-finished golden teak, but white oak or cherry are offered as options. The teak has solid frames with no square edges and the floor is solid planking. Beaumont explained that Kraken can provide this quality craftsmanship at a comparatively low price because of the labour rates in China.
Personally, I did find the interior styling somewhat plain and unremarkable. White Dragon has already sailed 12,000 miles and, in some areas, it showed.
The varnish was showing signs of wearing through in places, including in the heads and around hatches, while some interior metalwork showed signs of corrosion. There is room for improvement with finish quality and the insulation could also be better, both for the engine compartment and for the cabins.
Practical galley
The passageway galley is ideally laid out to work at sea, with excellent headroom and capacious, practical stowage. All worksurfaces are fiddled and there are deep drawers for appliances, ventilated areas for vegetables, plus deep double sinks and a scraps bin inboard.
A Quooker hot water tap (think boiling water in an instant with no wasted energy) is useful for a quick brew and makes sense in combination with White Dragon ’s induction stove. The use of an induction cooker avoids the need to ship gas, is easier to clean and safer.
“We move heaven and earth to talk people out of using gas,” says Beaumont. He thinks it pointless and impractical to try to refill gas bottles or find the correct regulator sizes in foreign countries if you have a generator aboard. A front-opening freezer allows cool air to circulate properly. The fridges can also be set at different temperatures on each shelf, with a stainless steel rack at the back to prevent freezer burn.
The aft cabin island berth is square so you can sleep fore and aft or athwartships
The fittingly large master cabin has generous stowage in large wardrobes and below the berth, and the layout can be tailored to suit. The vast island berth is square so, with the use of the fitted leeboards, it allows you to sleep either fore-and-aft or athwartships.
The downside of the layout is a comparatively compact heads compartment, particularly the shower. Recognising this, Kraken is increasing the beam on the new mould to gain around 8in more room here.
The twin bunk cabin furthest forward has an ensuite heads
Forward cabins
The layout forward of the saloon comprises two bunk cabins and a compact double, a format that will suit having plenty of friends or family aboard. Kraken wanted to avoid having a V-berth cabin, to keep the cabins further aft where there is greater beam and a better motion at sea. The heads/shower in the bows services the forward cabin, while the double cabin and port bunk cabin share a heads.
The cabins are plain in style, but have good headroom and stowage space in lit and ventilated lockers. The berths all have lee cloths, reading lights and useful USB sockets.
For those who want a new boat for remote bluewater cruising, a Kraken is appealling. There are few new boats I’d place enough faith in to want to sail in a gale. The question is what sort of weather do you expect to encounter? There will be those who think the overall design looks dated, perhaps because many of a Kraken’s features, including an integral keel and overhanging hull lines, are traditional in concept. Yet they’re employed for the very reason that they are tried and tested. At the very least, knowing that your keel cannot be separated from the hull is incredibly reassuring. Like some Asian and American boats the Kraken arguably lacks the modern touch of European design, particularly down below. Through design, build and company philosophy, however, here is a yacht that places seaworthiness well above wow-factor. Every element has been conceived with sturdiness and safety in mind. Kraken offers a lot of boat for the money. European-built ocean cruisers typically cost around a third more (the starting price is around €1m less than for a 67ft Oyster or Contest). The Kraken delivers on its robust promise and I’ve little doubt the experience behind this new company will help it appeal to serious cruising sailors.
Used Yachts For Sale
Sail monohulls 50ft >, kraken boats for sale, kraken 50 boats for sale.
Buy with Confidence
IMAGES