a to z yachting

• Collaborators

2-8 TOWNHOUSE GATE, Whitstable, POOLE, BH152PW United Kingdom

[email protected]

Glossary of sailing and nautical terms

COVID 19: You can change your booking on most of our boats if your travel plans are affected by coronavirus. See here for more details

Let us help you plan the perfect sailing trip

Provide your travel details, receive free offer and enjoy your holiday!

In order to become a true sailor, you’ll first need to learn some essential sailing terms. Luckily, we’ve got you covered! In this A-Z of yachting terms, we’ll briefly explain yacht terms, parts, equipment, sailing commands, and even some pirate jargon.

For you to understand the ins and outs of a boat you should know where it starts and where it ends. The front of a boat is known as the bow while the back is called the stern. Also, while the left of the boat is called the port side, the right is called starboard. Now that you’re familiar with the different sides of a boat, let's get down to real sailing business. 

• ABANDON SHIP! – You have probably heard this in movies and you know it doesn't bring any good. You should leave the vessel immediately as it looks like your ship is in some imminent danger.
• ABOARD – When you’re aboard, you are on a boat. The opposite of ashore. 
• ABOVE DECK – Above deck means you are standing on the deck, not above it.
• ABREAST – We call vessels that are side to side - abreast.
• ADRIFT – Don't panic but if your vessel is adrift it means it has sailed off without you. Okay, you can panic a little.
• AGROUND – If the water is not deep enough, then you go aground and your vessel’s bottom touches the ground.
• AHEAD – This means something is in front of the boat, for example your destination is ahead.
• AHOY – Another way to say hello, with a little pirate tone.
• ALL HANDS HOAY – Everyone should get on the deck. 
• AMIDSHIPS – The middle of a vessel, whether from her length or width. 
• ANCHOR – A chain with a hook on the end that falls to the bottom of the sea and prevents your yacht from sailing off without you. Used for parking your yacht in a bay.
• ANCHORAGE – A great spot for holding, anchoring and sheltering your vessel.
• APPARENT WIND – A mixture of the true wind direction and the wind created by the sails.
• ASHORE – Being on the shore, and not on your vessel. 
• ASTERN – Opposite of ahead is astern, in other words behind. 
• AYE, AYE – A reply to a command to show that it will be carried out.
• BAGGYWRINKLE – A soft covering for cables that prevents friction between sails.
• BAREBOAT – Sailing a yacht on your own without a crew or skipper. 
• BATTEN DOWN – If you hear “Batten down the hatches!” make sure you secure any hatchets and loose objects so you don’t lose anything important.
• BEAM – The width of your vessel.
• BEARING – Bearing is the direction in which we are headed. The reference point can be a compass or the heading direction.
• BELOW – Instead of being “above deck,” you can also be “below” it.
• BERTHS (Sleeping) – The number of people able to sleep on a specified vessel.
• BERTHS (Mooring) – The location in a harbour or port for mooring a vessel
• BEAM REACH – Is the position of a sail when the true wind hits it at a 90 degree angle.
• BILGE – The deepest part of the vessel’s hull, where water can enter.
• BOAT HOOK – A pole with a hook on the end. You can use it to grab and pick up a rope, collect something that has fallen overboard, or push the vessel off the port.
• BOOM – This is the horizontal pole that runs along the bottom of the sail. A part that often hits unsuspecting victims on the head in small vessels. Not a very pleasant experience.
• BOW –The front of the vessel also known as the ”pointy end” of the boat. 
• BOW LINE – A rope that’s tied onto the front of the vessel that stops the vessel from moving sideways when moored.
• BOWLINE – To confuse you, this is a completely different from the bow line. It’s pronounced “boh-lin” and it’s a knot which creates a loop at the end of a rope.
• BRIDGE – The part of the vessel from where you steer and control the speed.
• BRIGHTWORK – Brightwork is the shining woodwork or polished metal that you can see on a vessel.
• BUOY – A buoy is a floating device that marks a position, a hazard, or shallow sea. Some are also used to moor vessels.
• BROAD REACH - Sailing downwind with the wind is hitting the sails at an angle between 91 and 170 degrees. 
• CABIN – Separated living units, like a bedroom.
• CAPSIZE  – When a vessel leans too far causing it to flip over. This can result in the sinking of the ship. 
• CAST OFF – When you cast off you let go of a rope from where your vessel has been moored up.
• CHAFING GEAR – It sounds quite uncomfortable, but it's not for you. “Chafing gear” is a tube or some type of fabric that you wrap around a rope to stop it from rubbing on a rough surface.
• CHART – A nautical map that gets you from point A to point B.
• CLEAT – A fitting on vessels used to tie or secure ropes. 
• COCKPIT – An opening from where you can control the vessel.
• COIL – When it’s time to put away ropes, you make a neat, circular coil with them.
• COMPASS  – A navigational instrument that revolutionised travel.
• COURSE – The route you follow across the water.
• CURRENT – The current is actually the movement of water, usually caused by tides or wind.
• DEAD AHEAD – Dead ahead means straight ahead.
• DEAD ASTERN – Meaning behind you. The complete opposite of dead ahead.
• DECK – Not the deck of playing cards. This is a surface that covers any part of a vessel on which you can walk on.
• DINGHY – A small inflatable boat attached to the yacht. It is sometimes easier to go with the dinghy. 
• DOCK – A pier, float or a wharf where you can moor your vessel.
• DRAFT/DRAUGHT – It can mean two things, the depth of a vessel underwater or the fullness of a sail.
• DUNSEL –  This part has no use on a ship. Don't be a dunsel! 
• EASE – To let the sails out.
• FATHOM – In sailing, a fathom is a nautical unit of length. It matches six feet or approximately two metres.
• FENDER – The colourful cushions that hang over the edge of a vessel to prevent damage to the boat or pontoon.
• FLOOD – This doesn't have to be super dramatic, it can simply be used to describe an incoming tide.
• FORE-AND-AFT – A centre-line of a vessel that runs lengthwise, parallel to the part of the hull that goes deeper into the water below it. 
• FOREPEAK – An open area in the front front of the vessel.
• FOULED – A fouled piece of equipment is blocked, tangled, or tarnished.
• GALLEY – A vessel’s kitchen. Go on, we know you’re hungry.
• GANGWAY – The gangway is where you can get in and out of the vessel.
• GEAR – When you hear “Get your gear!” it means ropes, lines, blocks, and other equipment on board.
• GENOA/JENNY – Might be quite confusing if your name is Jenny. A Genoa or Jenny is a sail that overlaps the mainsail.
• GRAB RAILS – When in danger of falling off the boat, it’s a good idea to hold onto the grab rails to prevent that. 
• GROUND TACKLE – The bits that touch the ground such as the anchor and its gear.
• GUNWALE – The rail that goes around the edge of the deck. 
• HALYARD –  All the ropes used to pull sails up.
• HATCH – An opening in the vessel’s deck that has a water-resistant cover.
• HEADING – The direction the vessel is going in.
• HEADWAY – A headway vessel is going forward, while the sternway is moving backward.
• HEADS – The heads are actually the toilets, the loo, dunny… It can also be the upper corner of a triangular sail.
• HELM – If somebody asks you to take the helm, drop everything you are doing and take the wheel. The helm is the wheel or tiller that controls the vessel.
• HELMSPERSON – The best and the worst job on board. The person steering the wheel.
• HOLD – The inside of the yacht’s hull.
• HULL – The main body of a vessel, the part that floats.
• INBOARD – Simply inside the vessel’s edges.
• IN IRONS – When the boat is difficult to manoeuvre under sail.
• IRON MIKE – A slang for auto-pilot. Not a famous boxer.
• ITINERARY – The route of travel on your holiday. Usually planned in advance but needs to remain flexible to respond to weather conditions and personal preference
• JACOB’S LADDER – The type of rope ladder that you’d use to climb up something. It can be lowered from the deck when passengers come on board. 
• JETTY – A jetty is a structure made to create breakwater, shelter, erosion control, or a channel. 
• JIBING/GYBING – On a vessel, jibing means turning away from the wind until the wind comes from the other side.
• KEEL – The central structural base of the hull, the “backbone” of a vessel.
• KNOT – Not just a loop you tie in a rope or string, but also a unit of speed (equals one nautical mile an hour)

• LATITUDE – Geography knowledge can be used here. The latitude is the distance north or south of the equator. It’s measured in degrees and up to 90˚ north and 90˚ south. Each degree of latitude accounts for 60 nautical miles.
• LAZARETTE – A storage space at the back of the vessel.
• LAZYJACK – Wires leading from the mast (the big central metal pole) to the boom (pole that runs along the bottom of the front partl) that helps lowering the sails.
• LEE – The down-wind side of a vessel or shore which is sheltered.
• LEE CLOTHS – To avoid falling out of bed in the middle of the night, you can use a lee-cloth to keep you safe.
• LEEWARD – This is the direction away from the wind, as opposed to windward, which means into the wind.
• LOA – The maximum length of a yacht including overhanging ends that extend beyond the main bow and main stern.
• LOG – The log measures speed and records the vessel’s course.
• LONGITUDE – This is the distance east or west of the meridian line at Greenwich, UK, which is measured in degrees. There are 180˚ west and 180˚ east of Greenwich.
• LINE – This is a general term for a rope or line on a vessel that has a control function.
• LWL – Load waterline length or the length of a yacht that is in contact with the water.
• MAINSAIL – The main sail that sits behind the main mast on a yacht.
• MAST –The big metal pole that reaches from the bottom of the yacht to the sky. The sails hang from the mast.
• MED MOORING – The art of reverse parking a yacht into a small gap, a typical mooring technique in most Mediterranean harbours.
• MIDSHIP – The middle of the vessel. 
• MONOHULL – A boat with one hull. The classic sailor’s yacht
• MOORING – When you moor a vessel, you tie it to a buoy or a pier. And then hope it won’t go adrift.
• NAUTICAL MILE – A measure of distance when on water. It’s around 6,076 feet, 1,852 metres, 2,025 yards, or one minute of latitude. 
• NAVIGATION – Keeping to the route of a vessel when on a voyage from point A to point B.  Basically, figuring out where you are and where you are going. 
• OCEAN – Don’t think this one needs explaining, but anyhow a huge blue surface, pretty wet too.
• OPERATIONAL LANGUAGE – The language that the crew use to give instructions. 
• OUTBOARD – When something is outboard, it’s beyond the vessel’s sides.
• OVERBOARD – It’s probably best to avoid this one. When someone or something is overboard, it’s over the side of the boat.
• PIER – A pier is a loading platform held by posts that extends out from the shore.
• PILOTAGE – Piloting when you navigate using visible features on land or water.
• PORT – The left side of the vessel is called the port side. It is also another name for a harbour.
• PROW –A poetical alternative term for bow.
• QUAY – A stone or metal platform lying alongside or above the water. Usually used for parking, loading and unloading vessels.
• REACHING – For most sailboats, this is the fastest way to travel. A close reach is toward the wind, and a broad reach is slightly away from the wind.
• REEFING – The preferred method of reducing sail area so it is easier to control. Especially useful in higher winds and bad weather conditions. 
• REGATTA – A series of boat races.
• RIGGING – The ropes and wires that control the sails and support the masts.
• RIP RAP – A pile of rocks and rubble made to form a breakwater, often surrounding an off-shore lighthouse or vulnerable harbour. 
• RUDDER – When you change directions on the vessel, it moves the rudder which in turn steers the vessel. It’s usually a vertical plate or a board connected to the back.
• SAILS – The most important part for sailing. An eco-friendly engine that converts wind power into boat speed. 
• SALOON – The living area, you go here to relax.
• SATELLITE NAVIGATION – You have probably used regular navigation that uses radio transmissions before. However, the equipment on a vessel is a bit more complex and sophisticated.
• SCUPPERS – Scuppers are the holes in the deck that let the water drain off. 
• SEA COCK – A sea cock is a faucet in the hull that can be turned off when not in use.
• SEAMANSHIP – All the skills of boat handling can be called seamanship. It could be maintenance, repairs, piloting, sail handling, marlinespike work, and rigging.
• SEA ROOM – It’s actually used to describe a safe distance from the shore or other hazards. 
• SEAWORTHY – If a vessel can safely sail in rough weather, we call it seaworthy.
• SECURE – When something is secure, it is tied safely.
• SET – When the current is flowing toward a particular direction, it is set!
• SKIPPER – The most important person on your yacht, the person in charge and responsible for the safety of all aboard 
• SLACK – Something that is not fastened.
• STERN – The rear of the yacht. Also can be the skipper’s voice tone if your yacht floats away.
• SOUNDING – This has nothing to do with sounds, it is actually a measurement of water depth.
• SPRING LINE – This is a rope that stops a boat from moving forward or backward while being fastened to a dock. Also used during docking and undocking.
• SQUALL – A squall is a sudden, violent wind that often brings rain. Get your bad weather gear ready!
• STAND-ON VESSEL – A “stand-on vessel” is a vessel that has right of way and should maintain its speed and direction. A give-way vessel should take steps to avoid a stand-on vessel 
• STARBOARD – Starboard is the right side of a vessel when looking towards the front/bow
• STEM – The front of the vessel.
• STERN – The back of the vessel.
• STERN LINE – This is a rope leading from the stern (back) of the vessel.
• TACKING – Zig-zagging into wind so the wind passes from one side to another. 
• TILLER – A tiller is a bar or handle that you use to turn a vessel’s rudder to change directions.
• TOPSIDES – This is the bit of the vessel that’s between the waterline and the deck.
• TRIM – No, not a haircut trim. This trim means making adjustments to sails to maximise their efficiency.
• TRADE WINDS – These winds blow from the north east in the Northern Hemisphere and the south east in the Southern Hemisphere. Sailors use them because they push vessels toward the equator.
• TRANSOM – The transom is a wall at the back of a vessel. 
• TRUE WIND DIRECTION – The direction from where the wind is actually coming from.
• UNDERWAY – When you are on the sea, your vessel is underway. In other words, it’s not moored, at anchor, or aground.
• VESSEL –  A craft for traveling on water, usually a larger boat or a ship.
• WATER – The liquid you can drink and float on.
• WATERLINE – A painted line on the vessel that shows where the vessel ends and the sea starts. 
• WAY – The path that a vessel leaves after itself when it moves across the sea.
• WATCH – When you are on a watch on board ­you have to work with your fellow watch members.
• WINCH – A rotating, horizontal drum, powered either by electric motor or human motion
• WINDWARD –This means to go into the wind, and it’s tough to sail windward. 
• YACHT – All kinds of vessels that are either powered or have sails

• Yachting etiquette from A to Z

Like a social event, there are written and unwritten rules to follow on a boat and in the harbour. It doesn't matter if you're sailing with a group of friends, racing or a lone sea dog, everyone should know the basics of sailing etiquette. Do you know the basic rules and customs on a yacht?

General rules of sailing etiquette

Sailing, boating, yachting and all ways of navigating the waters have a very long tradition. Over this time, rules have evolved about how to behave on boats and in harbours. Most of these rules have a practical rationale to ensure a smooth and accident-free voyage, whilst others are rather ridiculous nowadays and stem from the superstition of ancient sailors venturing into the unknown. Still, some of these are worth heeding as well and you should never needlessly try the patience of Poseidon or Neptune.

In general, yachting etiquette can be divided into two main categories. The first is behaviour on board when sailing and the second is etiquette in port. Sub-topics include  observing the applicable rules of yachting , the correct placement and display of flags and greeting crews of passing yachts .

YACHTING.COM TIP: Before every voyage,  pay your respects to Neptune  by pouring a small amount of alcohol in the sea. Superstition though it may be, no one wants to antagonise the King of the Seas. Also, don't whistle on board. They say it disturbs the souls of dead sailors, who will retaliate with a foul wind. Do you know all the  patrons  who have protected sailors and seafarers for centuries?

How to behave on board when under sail

The first and most fundamental rule is that  the captain always has the final say . They are responsible not only for the boat and the smooth running of the voyage, but also for the whole crew. In addition, a yacht provides a relatively limited space in which a group of people must get along together. If a conflict arises, which is not uncommon in tense situations, the captain acts as the chief arbiter and conciliator.

Next, during the voyage, the crew should not stand on deck unless absolutely necessary. Either crew members are on deck as part of manoeuvres, sitting on deck, acting as a so-called 'live ballast' when the ship is heeling, or resting in the cabin. This rule is purely practical. A standing crew member could obstruct the helmsman's view of the boat and its course, and there is also a risk of losing balance and falling overboard.

An experienced crew should also never, as a matter of yachting etiquette, have fenders out of the boat along the sides or have ropes and lines dragging in the water. Aside from the fact that loose ropes and untidy fenders hinder the boat, it shows an ignorance of the basic rules of sailing that is an embarrassment to the crew.

YACHTING.COM TIP: A skipper's licence is required to operate a boat at sea. Unfortunately, unlike a driving licence, there are several options — how do you choose the right one? If offshore sailing appeals to you, try our  Academy where you can get a  C skipper's licence  or a  Royal Yachting Association RYA licence .

How to behave in port

There are two main areas of yachting etiquette in the harbour. One is the arrival of a sailboat or ship into the harbour and the other is behaviour on the moored ship and ashore. This is where you need to be well versed in yachting etiquette, as the eyes of experienced seafarers will be watching you and they will be able to tell at a glance how experienced and knowledgeable your crew is. There are many rules, but above all — consideration for others is fundamental. Never get in anyone's way and only do what you wouldn't mind from others.

The boat should always be in top condition when in port. This means a tidy deck ,  properly packed sails and furled lines, and an overall orderly appearance. Different shoes should be worn on deck than ashore, or at least shoes with white soles and only after checking that there are no stones stuck there that could scratch the boat.

Yachting etiquette in port also includes camaraderie and empathy . No one will like a crew that is unhelpful to others in distress, loud late into the night, disrespectful of marina rules and regulations, disrespectful of service, and otherwise out of step with other customs, including local ones.

Sailing flags, greetings and other wisdom

Not only should an experienced crew know how to behave during a voyage and in port, they should also understand other written and unwritten customs. It certainly pays to know the flag alphabet and the location of yachting flags. A yacht should always carry the national flag of the country where it is sailing, the flag of its country and possibly the flag of its yacht club. For each type of boat, the placement of the flags varies. Generally, however, the national flag is placed at the stern mast, the courtesy flag goes under the starboard spreader or from the leech with the placement of the club flag being relatively arbitrary.

Sailors use specific jargon which is true in greetings, where there are two common ways. On smaller boats, helmsmen greet each other with a shout of  "Ahoy" , while on larger boats a raised hand is sufficient. In both variations, it is always the helmsmen and never the crews who are saluted.

If you get your sailing clothes wet during the voyage or need to change your clothes in port, they can be dried on the line, rails or boom on the boat. However, it is essential to stow all laundry on board before setting sail.

There are many other rules and customs associated with yachting etiquette, but you should always know the basics first.

YACHTING.COM TIP: Ethics  – a theoretical science and doctrine that summarises a set of rules for proper conduct Etiquette  – a code that specifies written and unwritten rules of conduct and social customs within a particular group of people or community (family, state, interest group) A final piece of advice   – if you are unsure about anything, ask the skipper.

Despite all the rules, a holiday on a boat is an incredible experience. I will be happy to help you arrange it.

Denisa Nguyenová

• Mail: [email protected]
• Call Us: +44 (0) 23 8045 8737

How to sail: A-Z of Yachting Terms

When learning how to sail have you ever wondered when you are on a yacht what some of those yachting terms mean, we have asked our RYA Training Centre pupils which ones confuse the most. Here are a selection, which includes the obvious to the more obscure!

A baft: A location on the boat but further to the rear of the boat. “The tiller is abaft the mast.”

A beam: The beam is the widest part of the boat. When another boat is abeam, it is at a right angle off the beam to either the starboard or port side of the boat you are on.

A ft: When on a boat you refer to the stern part of the boat as being aft or to the rear of the boat.

A head: A term used to describe the area in front of the boat you are on. “Look ahead.”

A ids to Navigation: This includes all external systems like channel markers, preferred route buoys, danger and safe water buoys, isolated danger and regulatory markers etc. that help determine a boats position or course, the presence of dangers or obstructions and the preferred route to navigate.

A midships: In the middle of the boat between the stern and the bow.

A pparent Wind: The apparent wind is a combination of the true wind and the wind caused by the boat travelling through the water. On an windex, the apparent wind will cause the windex to show wind direction just in front of the true wind.

A stern: A location off the boat and behind it.

B ulkhead – Refers to an often watertight, interior wall on the boat

Backing Wind: Refers to the wind shifting direction in a counter-clockwise direction. This usually means that bad weather is approaching.

Backstay: A wire running from the top of the mast to the stern of the boat. The backstay stops the mast from falling forward and also helps to control the degree of mast bend when tuning a boat.

Battens: Wood, fiberglass or plastic strips slid into pockets along the leech of the sail. Battens help to shape and strengthen the sail to increase overall performance.

Beam: The widest part of the boat.

Beam Reaching: One of the points of sail. You are ‘beam reaching’ when sailing directly sideways to the wind on either a port or starboard tack. Think of a clock face – if the wind is blowing from 12 o’clock, sailing at between 3 o’clock or 9 o’clock would be a beam reach.

Bearing Away: Turning away from the wind or turning downwind.

Beating: Sailing towards the wind by tacking back and forth across the wind.

Belayed: Secured, tied to, made fast to.

Bend On: To secure one thing to another. Tieing two lines together.

Bifurcation: A channel junction (two channels meeting) usually marked by a ‘bifurcation buoy’ indicating the perferred channel to follow.

Bight: A loop or bend in a line.

Bilge: The lowest inner part of a boats hull.

Bitter End: The utmost free end of a line. (The other end is referred to as the ‘Standing Line’).

Boat Wind: The wind created by the boat moving through the water. The true wind and the boat wind combine to create the apparent wind direction.

Boat Fall: Rigging used to raise or lower a ship’s boat.

Boat Painter: Rope tied to the front end of a boat used to either tow a boat or to secure it to a dock.

Bollard: Wooden or iron post on a pier to which the boat is secured.

Boom: The boom is the pole running aft from the mast to which (among other things) the foot of the mainsail is attached.

Bowline: A very strong and yet easy to untie knot that creates a loop in the end of a line.

Breastlines: Mooring lines that run from the bow and the stern at right angles to the dock to stop the boat from drifting out from the dock.

Broad Reach: One of the points of sail. Sailing downwind off to the port or starboard side. Think of a clock face – if the wind is blowing from 12 o’clock, sailing at between 4-5 o’clock or between 7-8 o’clock would be a broad reach.

By the Lee: Sailing downwind with the mainsail remaining on the same side of the boat that the wind is hitting. If you are sailing downwind on a port tack, typically the mainsail would be off the starboard side of the boat. When sailing ‘by the lee’, the mainsail in the same situation would remain on the port side of the boat out at a 90 degree angle to the boat.

C lew – The lower aft corner of a sail

Cabin: The below deck living quarters.

Cable: Measurement of distance equal to 0.1 nautical mile.

Cam cleat: A fitting through which a line is run through. The cam cleat consists of two cams that wedge against the line stopping it from being pulled out.

Cardinal Aids to Navigation: Buoys with indicate the location of hazards, safe water or deep water by reference to the four cardinal points of a compass (North, South, East, West).(See our section on buoys for a more complete explanation.)

Catboat: A boat with one mast flying no foresail (jib).

Cast Off: To release the lines allowing the boat to leave it’s mooring.

Chainplates: Very strong metal plates affixed to the hull to which the forestay, backstay and shrouds are attached.

Chart Datum: For navigational safety, depths on a chart are shown from a low-water surface or a low-water datum called chart datum. Chart datum is selected so that the water level will seldom fall below it and only rarely will there be less depth available than what is portrayed on the chart

Chock: a metal fitting, either oval or U-shaped, through which mooring lines are passed. Chocks help reduce abrasion saving the lines from excessive wear and tear.

Cleat: A small, metal deck fitting with horns used for securing lines (belaying).

Clew: The lower rear corner of a sail.

Close Reach: Point of sail – sailing against the wind at an angle somewhere between a Beam Reach and Close Hauled. Think of a clock face – if the wind is blowing from 12 o’clock, sailing at 2 o’clock or 10 o’clock would be a close reach.

Close Hauled: Point of sail – sailng as close to the wind (sharp angle to the wind) as possible without the sailings luffing (fluttering).

Cockpit: The open inset area from where the boat is steered.

Companionway: Stairs or ladder on a boat usually leading down to the cabin.

Cringles: Open metal rings inserted into the sail (also called grommets) used as reefing points for a sail but also found at the clew, head and tack of the sail to attach halyards, lines, outhauls etc.

Cunningham: A line used to adjust the forward edge of the mainsail. Usually runs from the tack of the sail to the front area of the boom.

Current: The horizontal flow of water. (Tide is the vertical flow of water.)

Cutter: A cutter has one mast but sails with two foresails.

D raft – This describes the depth of a boat measured from the deepest point to the waterline

Davit: A crane onboard that can be swung out over the side for hoisting or lowering boats.

Dead Reckoning: Navigational term – method used to plot the course already travelled by measuring speed and time to calculate distance.

Deep Six: A slang term meaning to discard something over the side of the boat.

Degree: A distance of measurement on a nautical chart. One degree equals 60 nautical miles. Each degree is broken down into 60 minute intervals. One minute of one degree equals 1 nautical mile.

Deviation: A ship’s magnetic compass reading can be affected by metal objects on the boat (electronic equipment etc). The difference between the correct magnetic reading and the ships compass magnetic reading is called deviation. Deviation will vary depending on the direction of the boat.

Dog: A metal fitting used to secure watertight doors, hatch covers and scuttles.

Downhaul: A line attached to the tack of the sail and used to pull down or tighten the mainsail to increase sale efficiency.

E ase: To let out or ‘ease off’ a line.

E nsign – The national flag of the boats home country

F Fairleads: A metal fitting through which lines are run to in order to change the direction of the lines while reducing friction on the lines.

Fairway: Sailing on inland waters, fairway means an open channel or being in midchannel.

Fast: To make fast. To secure (snugly tie) a line to something.

Fathoms: A unit of measurement. One fathon equals 6 feet.

Fenders: Cylindrical air filled plastic or rubber bumpers hung off the side of a boat or dock to prevent damage to both dock and boat.

Fetch: The distance over open water the wind has blown.

Faked: A line is faked by zig zagging it back and forth so that when it is used it will not tangle on itself.

Flaked:A sail is flaked when lowered. Flaking a sail is the process of folding the sail back and forth upon itself like the blades on a paper fan. Flaking a sail will help prolong the sail life.

Foot (Sail): The foot of a sail is the lower part of the sail. In the case of a mainsail, this is the part of the sail that runs along the boom.

F orepeak- The cabin most forward in the bow of the boat

Forestay: The forestay is a wire that runs from the top of the mast (or near the top of the mast) to the bow of the boat. The forestay supports the mast from falling backwards and is also used in shaping the bend in the mast for maximum efficiency. The luff (front) of the foresails (jib, genoa) are also generally attached to the forestay depending on the rigging system.

Forward: When on a boat, forward means towards the bow. “Move forward” – move towards the front of the boat.

Galley: The boat’s kitchen.

Genoa: The Genoa is a foresail that is larger than a jib. The clew (lower corner at the foot of the sail) extends aft of the mast unlike a jib.

Give-way Boat: Navigational rules – the boat not having the right-of-way. The Give-way boat must stay clear of the Stand-on boat. The Give-way boat must make it’s intentions known by making a decisive maneuver to alert the Stand-on boat.

Gooseneck: This is a metal fitting that attaches the boom to the mast.

G oosewinging – To sail downwind with the mainsail set on one side and the foresail on the other

Gybing: Sailing down wind and turning through the wind causing the sails to move from one side of the boat to the other.

Gybe ho: Term used by the helmsman to let his crew know that he has started to turn the boat into a gybe.

H alyard – A line which is used to raise things on a boat, so the main halyard line would be used to raise the mainsail

Halyards: Lines used to lower and raise sails.

Hanks: Clips found along the luff (front) of the foresail used to clip the sail onto the forestay (wire running from the bow to the top or near the top of the mast).

Hard over: Turning the wheel or pushing the tiller all the way over.

Head: Generally used to refer to the boat’s toilet. When talking about a sail, the Head is the top of the sail.

Head to Wind: The bow of the boat is pointed directly into the wind.

Heading up: Turning up more into the wind.

Heaving to: A way to, in effect, stall a sailboat by backing the jib, easing out the mainsail and turning the rudder hard into the wind. The forward wind pressure on the foresail wants to force the bow downwind. The rudder turned towards the wind wants to force the bow windward. These two counter effects balance each other causing the boat to hold it’s position with little movement. The mainsail is eased out all the way so that it does not catch any wind and therefore has no bearing on the boats postion.

Heeling: Leaning or heeling over caused by wind pressure on the sails.

Helm: The Helm is the steering mechanism of the boat (wheel or tiller). The person at the helm is called the helmsman.

Helms Alee: A term used by the helmsman to notify the crew that he has started to tack. Hypothermia: A dangerous condition where the body core temperature has been lowered causing extreme shivering, loss of co-ordination, in ability to make decisions and in extreme cases, loss of conciousness and even death.

I nlet – A recess, such as a cove or bay, along a coastline

In Irons: This occurs where the boat has been turned directly into the wind and has lost all forward momentum. Without forward momentum the boat loses it’s ability to steer.

J ackstay – A strong line, that can be made of wire, which runs fore and aft alongside the boat that can be used to attach your safety harness to.

Jacob’s ladder: A light ladder made of rope or chain with metal or wooden rungs used over the side or aloft.

Jib: The jib is a foresail (smaller than a genoa). The jib is about the same size as the triangular area between the forestay, mast and foredeck.

Jiffy reefing: This is a way to make the mainsail smaller by partially lowering it, tying or reefing the lower slack part of the sail onto the boom through gromets (holes in the sail) called reefing points. This is done in high wind conditions to power down the sail.

Jury rig: Makeshift – adapting parts and materials for a use not specifically designed for in order to get by until proper parts or repairs can be obtained.

K etch – A sailboat with 2 masts

Kedging: A method used to free a grounded boat by dropping it’s anchor in deeper water and then pulling on the anchor rode to attempt to free the boat.

Keel: The large heavily weighted fin like structure secured to the bottom of the boat. The keel helps to keep the boat upright and also reduces leeway (side slipping across the wind).

Ketch: A two masted boat. The second and smaller mast (mizzen) is positioned just forward of the rudder post.

Knot: Rate of speed. On land it is miles per hour, on the water it is knots (nautical miles) per hours. One knot equals 1.15 land miles – so one knot is just a bit faster than one mph.

L eeway – The sideways movement of a boat caused by wind and currents

Lateral Aids to Navigation: channel buoys (Red & Green), isolated danger buoys (Black & Red), safe water ahead (Red & White), regulatory buoys (Yellow), bifurcation buoys (Black & Yellow) plus channel identification markers and navigation markers are all considered Laterial Aids to Navigation.

Lazarette: A storage compartment, usually under the seats of the cockpit.

Lee Helm: Also called Weather Helm, this is the tendancy of the boat to turn into the wind once it has heeled over at a sharp angle.

Lee Shore: Feared by most sailors, this is the downwind shore from the boat.

Leech: The rear edge of the foresail or the mainsail running from the head (top) to the clew (rear corner) of the sail.

Leeward: Downwind.

Leeway: When a boat sails across the wind, the force of the wind causes the boat to slip sideways. This drifting or sideway motion is known as Leeway.

Lifelines: The lines running around the outside of the deck creating a railing. The lines are attached to stanchions (upright metal posts).

Luff: The forward edge of a sail running from head to tack (front corner of the sail).

Luffing: A sail is luffing when it starts to flutter in the wind. The term Luff is also used to describe the same situation. “The sail is starting to luff.”

Luff Up: To turn into the wind to cause the sails to start luffing.

M ultihull – Any boat that has more than one hull, such as a catamaran.

Made fast: Secured to.

Mast: The upright pole supported by the shrouds, forestay and backstay to which the sails are attached.

Masthead fly: A windvane attached to the top of the mast to show which direction was wind is coming from.

Monkey fist: A type of knot, heavy in nature and tied to the end of the rope. The weighted knot makes it easier to throw the rope a farther distance.

Mooring ball: An anchored ball to which you can secure your boat. Safer alternative to anchoring provided the mooring ball and lines are in good condition.

Mooring lines: Lines used to secure a boat to a dock or mooring ball.

MSD: Marine sanitation device (toilet).

N eap tide – When during the four week tidal cycle, the tide rises and drops the least.

Nautical mile (NM): International standard for measuring distance on water. One nautical mile equals one minute of latitude. (One nautical mile equals 1.15 land miles.)

O uthaul – This is a line used to tension the foot of the sail, to better control the curvature of the sail

P ulpit – A sturdy rail around the deck on the bow, normally surrounding the forestay

Pad eye: A metal eye (ring) through which lines can be passed in order to stop chaffing.

Painter: The bow line of a dinghy.

P-effect (Prop Walk): When a boat is in a standstill position and put into forward or reverse, the resistance of the boat to move and the motion of the propeller creates a paddlewheel effect pulling the stern of the boat to either port or starboard side depending on the spin of the propeller. This paddlewheel effect is known as P-effect or Prop Walk. P-effect is especially noticable in reverse where there is greater boat resistance to move backwards thus making it easier for the prop to pull the boat sideways.

PFD: Personal Floatation Device – life jacket.

Pintle and gudgeon: The pintle and the gudgeon together form a swinging hinge usually associated with the installation of the rudder on smaller tiller steered boats. The pintle has pins that fit into the holes on the gudgeon thus creating a hinge like fitting.

Points of sail: A reference for the direction the boat is travelling in relation to the wind. (in irons, close hauled, close reach, beam reach, broad reach, running)

Port: When on a boat and facing forward, the left hand side of the boat.

Port tack: Sailing across the wind so that the wind hits the port (left) side of the boat first.

Pulpit: Located at the bow of the boat, this area is enclosed by a metal railing.

Pushpit: Located at the stern of the boat and like the pulpit, this area is enclosed by a metal railing.

Q uadrant – This is a device connected to the rudder that the steering cables attach to

R egatta – Boat races

S hroud – The wires at the side that hold the mast up

Schooner: A sailboat that has two masts both the same height or on some schooners, the aft mast is higher than the fore mast.

Scope: Expressed in terms of a ratio, it is the length of the anchor rode let out compared to height above the sea bed. Height is measured not from the water line but from the top of the deck to the sea bed. A safe anchoring ratio is 1:7 which translates to 7 feet of anchor rode for every foot of height. Many sailors incorrectly assume that height means water depth and therefore find themselves dragging the anchor for lack of proper scope.

Seaworthy: A boat that is fit to be sailed at sea.

Self-bailing cockpit: A cockpit that allows water to drain automatically from the cockpit to the outside of the boat.

Shackles: Metal fittings (often U shaped) that open and close with a pin across the top of the ‘U’. Lines and halyards often use shackles. The mainsail halyard is secured to the head of the mainsail with the use of a shackle.

Sheave: A roller/wheel to guide a line or wire.

Sheets: Lines that are used to adjust sails by either pulling them in or by letting them out.

Shrouds: Also called sidestays, shrouds are the metal wires found on both sides of the mast running from the deck to the top or near top of the mast. The shrouds support the mast by providing lateral support.

Slack water: The period between the flood (tidal water moving in) and the ebb (tidal water moving out) where the water has in effect stalled – little or no movement.

Slides: The groove in the mast to which the luff (front side) of the mainsail is inserted. The slides hold the sail tight against the mast and allows the sail to be easily raised or lowered.

Sloop: a sailboat that has one mast and sails with the mainsail and one foresail.

Soundings: Water depths.

Spar: A spar can refer to any of the following: mast, boom or a pole.

Spinnaker: A large balloon-like foresail used for sailing downwind (running or broad reach).

Spinnaker pole: The spinnaker pole is boom-like in nature, but smaller and lighter, and attaches to fore part of the mast a few feet up from the deck. The other end of the spinnaker pole attaches to the leeward (down wind) base of the spinnaker.

Spreaders: Bars extending sideways from the mast (gives the mast a cross-like appearance). The spreaders hold out the shrouds so that they do not interfer with the rigging.

Springlines: Springlines are used to secure a boat to a dock and stop the boat from moving forward or backwards. The aft springline runs from a point on the boat near the bow to a point aft on the dock. The forward springline runs from a point on the boat near the stern to a point forward on the dock.

Squall: A sudden isolated storm associated with potentially high wind gusts.

Stanchions: Upright metal posts running around the outside of the deck supporting the lifelines.

Stand: This refers to the short period of time where the tide is neither rising or falling. (At a stand still.)

Standing rigging: Standing rigging includes the forestay, backstay and the shrouds. Unlike the ‘running rigging’, the standing rigging is generally only adjusted when the boat is not underway.

Stand-on boat: The boat that must retain her current course and rate of speed in order to avoid a potential collision with an approaching give-way boat.

Starboard: As you face towards the bow on a boat, starboard is the right hand side of the boat.

Starboard tack: Sailing across the wind with the wind hitting the starboard (right) side of the boat first.

Steerage: The ability of the boat to be steered. In order for a rudder to be effective in steering a boat, there must be boat movement. A boat not moving cannot be steered.

Stern: The most aft part of a boat (the very back of the boat).

Storm jib: Same as a jib but not as big. The smaller sail is used in high wind conditions.

T ender – A small boat or dinghy used to ferry crew between the boat and shore

Tack: The front lower corner of a sail. Also means to sail back and forth across the wind in either a port or starboard tack.

Tacking: Also called “Coming About”. Tacking is when the bow of the boat is turned through the wind onto the opposite tack.

Tail: The bitter end of a sheet tailing out from a winch.

Tang: A metal fitting used to affix the stays to the mast.

Telltails: (Also called Ticklers) These are small strings (wool, plastic) attached to both sides of the luff of the sail. When the telltails on both sides of the sail are blowing straight back, this indicates that the sail has been properly trimmed.

Through hulls: Through hulls are holes that go through the boat. Each through hull will have a shuttle cock (value) to stop the flow of water. An example of a through hull would be the head (bathroom). A through hull value is opened so that water from outside the boat can be pumped into the MSD (toilet). The value is closed and the toilet pumped empty into a holding tank.

Tide: The vertical rise and fall the oceans.

Tide rips: This is an area of rough water where the wind is blowing across the water in the opposite direction from which strong tidal current is flowing.

Tiller: In boats that are not steered by a wheel, a tiller (long handle) is attached to the top of the rudder in order to facilitate steering.

Toe rail: A small metal railing running around the outside of the deck used to support your feet.

Topping lift: A line running from the top of the mast to the end of the boom. The topping lift supports the boom when the sail has been lowered.

Topside: The portion of the hull above the water line.

Transom: The flat area across the stern of the boat.

Trim: To trim or adjust the sail to make it more effective against the wind.

True wind: The actual wind felt wind the boat is not moving.

Turnbuckles: Adjustable fittings usually attached at the end of shrouds and stays. Turning the turnbuckle one way or the other tightens or loosens the wire.

U nfurl – To unroll a sail

Upstream: Moving from seaward into harbor, moving with the flood of the tide, moving up river toward the headwaters.

V ane – A wind direction indicator

Veering: A wind shift in the clockwise direction usually indicating that good weather is approaching.

W inch – A mechanical device for pulling in a line

Wake: The waves created behind a boat as a result of the boat moving through the water.

Way: Movement of the boat.

Weather helm: The tendancy of the boat to turn up wind after heeling (leaning over).

Wheel: Controls the rudder. Taking control of the wheel is taking the helm.

Winch: Provides a mechanical advantage. Used to raise the sails, tighten the sheets and other lines.

Windward: Towards the wind.

Wing to wing: Running (sail directly downwind) with the mainsail out one side of the boat and the foresail out the other side of the boat.

X marks the spot on the treasure map!

Y awing – The side to side movement of a boat on an uneven course

Yawl: A sailboat that has two masts. The aft mast (mizzen) is shorter than the foremast. The mizzen mast is located aft the rudder post. (On a Ketch, the mizzen mast is located fore of the rudder post – this is the distinquishing factor between the two.)

Z ephyr – A very light westerly wind

Universal Yachting Ltd

[email protected]

• Contact us | UK Dufour Dealer
• Solent Yacht Charter Terms & Conditions
• Privacy Policy
• DATA REQUEST
• Dufour Yachts
• Boats For Sale
• Yacht Charter

Universal Yachting Ltd: Mercury Yacht Harbour, Satchell Lane, Hamble, Southampton, Hampshire SO31 4HQ

Call Us: +44 (0) 2380 458737   Mail: [email protected]

Do you speak yachtie? A-Z glossary of Yachting terms

Updated: Apr 24, 2023

Superyacht industry has its own unique set of terminologies, that may seem confusing to someone who is new to superyachting. While some of the terms used is borrowed from the boating industry, others are unique to the superyacht world. In this article, we will explore the most common terms used in the superyacht industry, and help newcomers understand the language of yachties.

Aft – The back of the yacht. It is also known as the stern, and it’s where the yacht’s engines and steering mechanisms are located.

AIS - AIS, or Automatic Identification System, is used to track other vessels and communicate with them. This is important for safety and navigation.

Anchor - A heavy weight that is dropped from the yacht to hold it in place.

Abeam - At a right angle to the center of a vessel’s length

APA - APA or Advanced Provisioning Allowance is an additional charter fee paid in advance to cover the cost of provisions such as fuel, food and drink, and marina fees. The APA is usually 30% of the charter fee.

Bow – The front of the yacht. This is the direction the yacht moves towards.

Beam - The beam of a yacht refers to its width, measured at its widest point. This is an important measurement, as it can impact a yacht's stability and performance.

Berth - A designated space in a marina or on a yacht where a yacht can be docked or anchored.

Bridge - The area of the yacht where the captain navigates and controls the yacht.

Bilge - The deepest part of the vessel’s hull often used for storage

Crew – The team of people who work on a yacht. This includes the captain, first mate, deckhands, steward(ess), chef, and engineers.

Captain - The captain is the person in charge of the yacht and its crew. They are responsible for the safety of the yacht and its passengers, as well as navigating the vessel.

Capstan - A winch used to wind in an anchor and tighten lines

Draft – The distance from the waterline to the bottom of the yacht’s hull. This measurement is important for determining the depth of water needed to navigate safely.

Displacement - The weight of the yacht when fully loaded.

Deckhand - A crew member responsible for maintaining the exterior of the yacht.

EPIRB – Emergency Position Indicating Radio Beacon. This device is used to send a distress signal in case of an emergency.

ENG1 - MCA-approved medical certificate required for all crew on commercial superyachts.

ENGINEER - The engineer or chief engineer ensures the safe and efficient operation of the main propulsion and all auxiliary systems on board, including deck machinery, tenders and toys, and all hotel services. He/She is the one that keeps toilet flushing, AC working and the galley power on as some would also say 😊

Fender – A cushion or bumper that is placed between the yacht and the dock or another vessel to prevent damage.

First Mate - The second in command after the captain.

Flybridge - An open deck on the top of the yacht.

Foredeck - The forward part of the deck of a ship, usually level with the main deck

GPS – Global Positioning System. This is used for navigation and to pinpoint the yacht’s location.

Galley - The galley is the kitchen on a yacht. Depending on the size of the yacht, it may be a small space with limited amenities or a fully equipped professional kitchen.

Gunwhale - The upper edge of a yacht’s sides

Gross Tonnage - This is a measurement of the volume of the yacht’s enclosed spaces.

Hull – The body of the yacht that floats on the water. The hull design affects the yacht’s performance and efficiency.

Head - The head is the bathroom on a yacht. Depending on the size of the yacht, there may be multiple heads for guests and crew.

Interior – The living quarters of the yacht. This includes cabins, the galley, and the salon.

IMO - IMO stands for International Maritime Organisation and is the United Nations agency responsible for the safety and security of shipping

Jib - on sailing yachts, it is the foresail

Jacuzzi – well... Do we need to say what it is? 😊 A hot tub on a yacht. It’s a luxurious addition to any yacht and can provide a relaxing soak after a day of activities.

Knot – A unit of speed used in navigation. One knot is equal to one nautical mile per hour.

Keel - On sailing vessels, a structural framework that runs longitudinally along the centreline of a hull to increase stability

LOA – Length Overall. This is the length of the yacht from the tip of the bow to the end of the stern. It is a common way to measure the size of the yacht.

Leeward - The side sheltered from the wind

Mooring – The process of securing the yacht to a dock or anchor. It’s important to moor the yacht properly to prevent damage and ensure safety.

Mile - Nautical Mile (to be more precise) is a unit used in measuring distances at sea, equal to 1,852 meters

Navigation – The process of determining the yacht’s position and direction. This includes using GPS, charts, and other navigation tools.

Net Tonnage - Net tonnage is a measurement of a yacht's cargo carrying capacity. This measurement takes into account the yacht's volume and the amount of cargo it can carry.

Owner – The person or entity that owns the yacht. The one you need to satisfy (almost) anytime for (almost) anything! They may hire a crew to operate the yacht or use a management company.

Overhead - The overhead on a yacht refers to the ceiling or roof of a cabin or room. This can be important for crew to know when moving around the yacht

Port – The left side of the yacht when facing the bow. It’s important to know port and starboard when navigating a yacht.

Quarter - The quarter of a yacht refers to the aft part of the vessel. This can be an important area for crew to work in when mooring or maneuvering the yacht.

Quality – The level of excellence and attention to detail that goes into building and maintaining a yacht. High-quality materials and craftsmanship are essential for a safe and comfortable yacht.

Radar – A device used to detect other vessels or objects in the water. This is important for avoiding collisions and navigating in poor visibility.

Rudder - An underwater blade used for steering

Steward(ess) – A crew member responsible for maintaining the interior of the yacht and attending to the guests. This includes cleaning, cooking, and serving meals.

Superstructure - The part of the yacht above the hull, including the decks and cabins.

Salon - The living room on a yacht.

Starboard - the right side of the yacht (when facing the bow).

Stern - The rear end of a yacht.

Tender – A smaller boat used to transport guests or supplies to and from the yacht. It’s important to have a reliable tender for accessing remote areas and exploring.

Trimming - Adjusting the angle of the sails on a sailing yacht

Underway – The state of the yacht when it’s moving. This is different from being at anchor or docked.

Varnish – A protective coating used on the yacht’s woodwork. Varnish needs to be regularly maintained to keep the yacht looking beautiful.

Windlass – A device used to raise and lower the anchor. This is important for anchoring the yacht securely and safely.

Warp - A line used for anchoring or mooring

X-ray – A medical test that crew members may need to undergo to ensure they are healthy and fit to work on a yacht. Crew members need to be in good physical condition to handle the demands of the job, especially when they stay a long time at sea.

Yachtie – A term used to refer to someone who works on a yacht. This includes crew members such as the captain, first mate, deckhands, steward(ess), chef, and engineers. Being a yachtie is not just a job, but a lifestyle that requires a unique set of skills and knowledge. One of the most important aspects of being a successful yachtie is being able to communicate effectively with your crew members and guests. Superyacht terminology can be complex and daunting for newcomers, but with some guidance and practice, anyone can learn to speak yachtie.

Zulu Time – A standardized time used in navigation and communication on yachts. It’s also known as Greenwich Mean Time (GMT) or Coordinated Universal Time (UTC). This ensures that everyone on the yacht is on the same schedule, regardless of their location.

You want more?

If you want to go further and master all technical words, have a look at the most complete report on maintenance systems used onboard yachts across the world.

To go quick, have a look at this video and discover the BoatOn Book 😊

You have other words you want to add to this article or want some explanation about? Write to us at [email protected] !

Related Posts

Logbook for Boats: How to comply with legal requirements?

How to develop fleet management software for boats with professionals ?

How will the CSRD apply to maritime industry companies ?

Watch CBS News

Several bodies recovered from wreckage of sunken yacht off Sicilian coast

Ferretti Yachts and Riva to attend Moscow Boat Show 2013

• Inspiration

Related News

Popular news this week, popular news this month, latest news.

• Yacht Charter & Superyacht News >

Written by Zuzana Bednarova

To be represented by Premium Yachts, Ferretti Yachts and Riva , two prestigious brands of the Ferretti Group, will be present at the Moscow International Boat Show 2013, displaying motor yacht Ferretti 530 as well as Riva Iseo yacht tender.

Luxury motor yacht Ferretti 530

Luxury yacht Ferretti 530 was very keen to undertake in collaboration once again with AYT – Advanced Yacht Technology, Ferretti Group Engineering Division and Studio Zuccon International Project . The compact dimensions, 16 meters long and almost 5 meters wide, allow the 530 yacht to deliver grand Italian luxury and cruising immersed in such comfort until now unheard of in a yacht of this size.

Ferretti 530 yacht boasts three revolutionary innovations: the full beam master cabin with chaise longue and two large open view windows that make it a real suite at sea level bathed in light, tones and the natural essences of teak. Moving the galley from the center to the aft section creates a unique open space that includes the saloon, galley, cocktail bar and the dining area, the cockpit area continues thanks to the tilting window. The roll bar free sky lounge and the spoiler allow the 530 a sporty appearance combined with elegantly formal lines.

Ferretti 530 Yacht - Interior

Riva , the iconic Ferretti Group brand, presented a new model at the historical Lake d’Iseo shipyards in July 2011. Featuring elegance and ease of transportation as its distinctive characteristics, Iseo superyacht tender , a 27 foot runabout, is destined to become a must-have for those who love cruising on both lakes and the sea, and, most importantly, design enthusiasts. It is also perfect for anyone wishing to enhance their yacht with an exclusive tender that will never go unnoticed.

Riva Iseo superyacht tender

Due to its ease of manoeuvrability and size, Iseo yacht tender is also ideal as a tender for large yachts. Innovative and elegant, it can also guarantee comfort in bad weather conditions. Besides the electrohydraulic bimini top, it was also designed with a waterproof, automobile-style soft top which protects those on board against water and the wind during cruising.

Please contact CharterWorld - the luxury yacht charter specialist - for more on superyacht news item "Ferretti Yachts and Riva to attend Moscow Boat Show 2013".

• Charity & Fund Raising
• CharterWorld News
• Classic Yachts
• Coronavirus
• Cruise Ship
• Ecological Yachts
• Expedition Yachts
• Expert Broker Advice
• Feature Superyachts
• Interior Design
• Legal & VAT Yacht Issues
• Luxury Catamarans
• Luxury Gulet
• Luxury Phinisi
• Luxury Trimarans
• Luxury Yacht Design
• Luxury Yachts
• Marinas & Harbours
• Marine Ecology
• Marine Electronics
• Marine Equipment
• Mega Yachts
• Modern Yachts
• Motor Yachts
• New Launch Yachts
• New To Charter
• Open Style Sports Yachts
• Private Jets
• Sailing Yachts
• Social Media
• Sports Yachts
• Superyacht Crew
• Superyacht Photographers
• Superyacht Products & Supplies
• Superyacht Refits
• Superyacht Reviews
• Superyachts
• Uncategorized
• Yacht Builders
• Yacht Charter
• Yacht Charter Destinations
• Yacht Charter Picks
• Yacht Charter Specials
• Yacht Delivered to Owner
• Yacht Designers
• Yacht Events & Boat Shows
• Yacht Fashion
• Yacht Industry News
• Yacht Photos
• Yacht Racing
• Yacht Racing & Regattas
• Yacht Safety Equipment
• Yacht Support Vessels
• Yacht Tenders
• Yacht Videos
• Yachting Associations
• Yachting Awards
• Yachting Business
• Yachts For Charter
• Yachts For Sale

Quick Enquiry

Superyacht news:.

Email Your Yachting News to: news @ charterworld.com

Ferretti Yachts

Ferretti Group announces its presence at Moscow Boat Show 2013

Ferretti Group Days 2013 to be marked by premiere of Ferretti 960 Yacht

Ferretti Group attending Hong Kong Gold Coast Boat Show 2014

Ferretti Group to deliver first Ferretti 960 superyacht and Riva 86 Domino yacht to Hong Kong by mid-December

The International SeaKeepers Society will host its 2024 annual Founders Event in October

Special offer for remaining weeks of September on board 51m sailing yacht RED DRAGON

A luxury charter yacht is the perfect way to encounter New England’s fall foliage display

Navigating the World of Luxury Yacht Charters: Your Guide to the Perfect Getaway

Charter yachts offering citizen science opportunities around the world

46m superyacht 2 LADIES offering a fantastic special offer

OCEA delivers 33m motor yacht ARAOK II to her new owner

The Monaco Yacht Show 2024: a dazzling display of the best superyachts in the world and much more …

39m sailing yacht LINNEA AURORA launched by SES Yachts

66m Benetti motor yacht IRYNA hits water in Italy

A first look at 55m superyacht PROJECT AGNETHA from Heesen Yachts

44m superyacht ORION ONE reaches a construction milestone

40m superyacht HYGGE from MCP Yachts commences sea trials

Rossinavi introduces full custom 50m superyacht BEL1

Home / School, courses also ONLINE / Russia

Sailing schools and courses (ISSA, RYA, IYT) in Russia

The possibilities for yachting in russia are unlimited, since this is a country with a long maritime history. you just need to choose where you want to sail. small and big lakes, full-flowing rivers, warm and cold seas — all this is available to those who want to try sailing in this country..

Practical yachting

You will be able to master the skills of sailing; learn to feel the boat, approach and leave the pier, learn about the safety measures on the water and much more.

There are places in 1 team

International Bareboat Skipper (IYT) Course

Having received the International Bareboat Skipper Certificate, you can independently charter a yacht on a charter and operate it in the waters of any country.

More details

ISSA Offshore Skipper course

The certificated confirms the skills sufficient to sail the yacht in light and dark hours at a distance from a sheltered port up to 100 sea miles.

IYT International Crew course

This is a certificate of excellence for those candidates who wish to train to become an active crew member on a power or sailing yacht. It includes Introduction to Boating for power and sail yachts.

IYT Introductory Sailing Skills course

This course is great for groups of friends or like-minded people to get together for a few days of fun sailing while learning skills to better help as crew onboard.

IYT Try Sailing Course

It’s a fun hands-on course to enjoy being on the water while learning basic sailing skills.

Yacht management training in the Moscow region

In three hours of training, you will learn the basic techniques of managing a yacht, learn some of the specifics of working with a yacht, a helm, sails.

RYA Coastal Skipper course

Advanced skippering techniques for yachtsmen with considerable knowledge of sailing and navigation, wanting to undertake coastal passages by day and night.

RYA Competent Crew course

This course is for beginners and those who would like to become active crew members rather than just passengers.

RYA Day Skipper course

A course for aspiring skippers with some yachting experience and basic navigation and sailing skills.

RYA Start Yachting course

A short introduction to sailing for complete beginners.

• Compare Yacht

• Azimut World

Find a dealer

Charter club, news & events, azimut yachts – aberton moscow.

Azimut Yachts Russia is an exclusive distributor of Azimut Yachts in the territory of Russia.

Sales Charter Brokerage Maintenance

We are a team of professionals with over 20 years of experience in yachting. We take 360 care of our clients including transactional tasks, new build management, crewing, afrtersales and many others

Follow us on WECHAT

Please keep me updated on everything about this yacht.

Non venderemo mai i tuoi dati, manterremo i tuoi dati al sicuro e non condivideremo mai i tuoi dati con terze parti per scopi di marketing. You can update your contact details at any time by emailing [email protected] or change your mind by clicking “unsubscribe” in any email you receive from us.

I have read Azimut Benetti s.p.a. privacy notice and:

I agree to receive the newsletter about Azimut’s world from Azimut Benetti s.p.a.

I agree to receive, via email, informational material regarding Azimut products from Azimut Benetti s.p.a..

We have successfully received your request and will contact you shortly.

Our newsletter will provide you with the latest news, on boat launches, previews and shows.

You will soon receive your first newsletter with the latest Azimut news.

Complete the form below to be contacted by a dedicated dealer who will gladly respond to your questions and requirements.

I agree with the disclosure of my personal data to other companies belonging to Azimut Benetti s.p.a. group and /or to third-party companies affiliated with Azimut Benetti s.p.a. for the sale of its products.

We have successfully received your request. One of our select dealers will contact you shortly.

Specify your request

Fill in the required fields and submit the form.

I have read Azimut Benetti s.p.a. privacy notice.

Thank you for your interest