Canterbury J Class Model Yacht
Canterbury J Class Model Yacht website
A Brief History of the Canterbury J Class Model Yacht
Sailing at the Christchurch Model Yacht Club [CMYC] in 1996-1997 there was a small classic J Class model yacht named RANGER with a length of 1.2 metres and this was owned by Dave Heanly. This yacht was J1 which was eventually purchased from Dave and is now on display in the CMYC club rooms at Hagley Park.
A group of CMYC members decided the J Class yacht would be ideal for easy fully rigged transport and sailing in weedy conditions at Lake Victoria.
The hull of number J1 was purchased from Model Boats and the sail plan designed by Hugh Hobden. An approach was made to purchase more hulls. Euan Sargison negotiated and another 9 hulls were purchased and sold very quickly.
The J Class Squadron was formed 2 Sep 1997. Two more hulls appeared making the total at this time twelve.
More hulls were in demand and the place that originally sold the hulls advised that the mould had been lost. After investigating it was found that the original hulls supplied had been taken from a Timaru J Class yacht.
It was decided to make a Canterbury mould with adjustments. The hull was deepened by 16mm and the lead reduced by 16mm and the trim weight put inside the hull. The J Class squadron purchased the new mould with a loan from Peter Vincent and the loan was repaid from hull sales. Number J13 was the first hull
To promote the sailing class three trophies were donated by Peter Vincent.
More Canterbury J Class historical information can be found HERE
The basic philosophy was to have an easily sailed and economically built RC yacht’ based on a one design principles to provide good resale value, and with racing dependent more on the skipper rather than designer/builder skill.These objects have been attained and the Class has attracted many first time sailors, mostly from the retired ranks who share the common creed, “it sure beats gardening!”
The boat can be transported easily in the average car or station wagon fully rigged. Many boats have features of the original Canterbury J Class.
The “Wednesday Windlers” can muster fleets of 30 plus for their around-the-lake sailing on Lake Victoria. Why not visit the lake on a Wednesday? Members turn out, except in the most atrocious weather, and are pleased to “turn over the controls” to any interested spectator.
377 hulls [December 2022] have been purchased and they are to be found in all areas of New Zealand and as far afield as the USA, Australia, Canada, Germany and the UK. It is a one-design yacht and all hull shells, keels and trim weights are made from moulds officially approved by the Canterbury J Association with an identification number moulded into the hull.
There are rules that, prohibit exotic materials, define a fixed minimum weight, strictly control dimensions in the three sizes of sail rigs.
The yacht can be bought as a kit or in separate pieces and assembled as the budget allows. This also allows members handy at making small components to make many of the parts and keep the price down. All parts are available: hulls white polyester, keels, brass fittings, and computer-generated sails, winches and radio gear. If you cannot find the part you want we will find it or we can make it at reasonable costs.
There is also an active and increasing North Island fleet sailing out of the T auranga Radio Sailing Club Gilmour Lake Waihi , [links to external sites] , Palmerston North and Auckland
J Class Yachts For Sale (Sail)
- Upcoming Events
- AMYA J CLASS History
- Stuff for Sale
- Construction Videos
San Francisco Model Yacht Clubs 125th anniversary.
Gene Novak & Dan Robinson with Svea featured on the cover of Sailing Science Center newsletter.
Stuff You Need To Know
About the AMYA J Class
Amya j class registration.
Learn more about the AMYA J Class
AMYA J Class Rules
Official Rules for the AMYA J Class
Drop us a line!
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
AMYA J CLASS
1330 North Andrew Drive, Kuna, Idaho 83634, United States
Copyright © 2022 AMYA J CLASS - All Rights Reserved.
J Class Class
Clubs | Members | Boats |
---|---|---|
5 | 66 | 151 |
- for Sail Manufacturers, |
Description
Model Range
The J Class model range consists of two J Class hulls, the Nottingham 48 and the Nottingham 60, each of which can be built to carry either bermuda rigs, gaff rigs and coming shortly a genoa rig. In addition I'm nearing the end of the development of the International Dragon, a little under 60 inches and designed from outset to carry a genoa rig. The Canterbury version of the 48 is still available for those who want to race abroad and I've also included on this website details of the Folkboat project.
The Nottingham 48 and the Nottingham 60 are supplied in "kit" form for the customer to build. The hulls are of very high quality and constructed using traditional fibreglass techniques with pigmented gelcoat to achieve the colour scheme choice of the customer. The kit includes the hull, rudder, ballast (for the 48), internal woodwork with stand, deck and hatches
The Canterbury J is only available in White as the hull will need to be filled and painted when the ballast is fitted however the ballast and woodwork are the same as the Nottingham. In a spirit of honesty I would have to declare that whilst this moulding is from a Canterbury Association approved mould the quality of the moulding is only fair compared with the high quality Nottingham mouldings. The quality is however less relevant as the hull will need to filled and painted anyway
The International Dragon is a new project. This model may become available as a kit but initially is available as a Ready to Run, with the customer only providing the radio. This model is built and engineered to the highest standards and will incorporate improved design features that are not generally found in model yachts...some day all models will be built this way!!
I'm introducing the Folkboat on this site on behalf of a chum, Charles Chambers. The hulls are laminated by ourselves and the model is available from Charles as a Ready to Run.
If you click on the arrow on the menu you will be able to open up more detail.
New Zealand Radio Yachting Association Inc.
The home of Radio Sailing in New Zealand
Canterbury J Class
The Canterbury J is a project that lets existing or newcomers to the sport of radio sailing, get started quickly with a good handling model yacht that is easy to build and cost effective. Additionally it has ease of transport and a good resale potential. The Canterbury J is a 1.22 metre (48″) yacht with a main and foresail rigged to a 1.6 metre mast. 350 hulls have been sold and they are to be found in all areas of New Zealand and some as far afield as the USA, Canada and the UK. It is a one-design yacht and all hulls come from official molds approved by the Canterbury J Owners Association. Each hull has a unique identification number molded into the hull.
The Canterbury J is registered with the NZ Radio Yachting Association as a nationally recognised class.
It is not uncommon to see groups of Canterbury J’s approaching the finish line together, particularly in calm conditions, when their ability to sail in the lightest of airs poses a challenge to other classes of yachts. A great Canterbury J attribute is the ability to negotiate weed and shallows because of the integrated keel / rudder profile; and it is this characteristic that has boosted our membership, making Canterbury J’s the predominant class of yacht sailed in Christchurch.
Another benefit is that within the basic parameters of the rules there is a great deal of freedom for the average builder to reflect ingenuity and skill, with the rigging, hatches, internal layout of components and deck layouts and composition.
The Canterbury J class history
In 1998 weed was the scourge of the Christchurch Model Yacht Club at Lake Victoria, making sailing long fin boats almost impossible. At this time Dave Heanly had purchased a commercial glass fibre hull of a traditional long keel yacht. This model, 48″ long was based on a MAP plan of the famous J Class Ranger, the last of the pre W.W.II defenders of the Cup, designed by Olin Stephens. Dave discussed with Hugh Hobden ideas for developing a rig for the boat with the idea of retaining some of the traditional form with model practicality. The resulting rig worked well and with two smaller ones for higher winds, it coped with a wide range of weather. The possibilities of this design seemed ideal for Lake Victoria
Peter Vincent and Hugh Hobden, after some protracted negotiations, purchased hulls and built up boats. With three boats sailing, others saw the potential and the rest is history – and an active Owners’ Association has been formed, a set of class rules drawn up and Championships sailed.
The basic philosophy was to have an easily sailed and economically built RC yacht based on a one design principles to provide good resale value, and with racing dependant more on the skipper rather than designer/builder skill. These objects have been attained and the Class has attracted many first time sailors, mostly from the retired ranks who share the common creed, “it sure beats gardening!”
The boat can be transported easily in the average car or station wagon usually fully rigged. Many boats have features of the original J Class in the form of deck layouts, hatches and names like Shamrock (No 1), Thistle, Endeavour etc.
In Christchurch it is not unusual to see “The Wednesday Windlers” muster fleets of 25 plus for their around-the-lake sailing on Lake Victoria.
A rapidly growing fleet also meet at various venues and days in the Bay of Plenty area thanks to the Tauranga Radio Sailing Club.
Why not visit the venues? Members turn out, except in the most atrocious weather, and are usually pleased to “turn over the controls” to interested spectators.
- J Class Contacts
- J Class News
- J Class Rules
- J Class Videos and Photos
Visit our website here: https://canterbury-j-class.nz
© The Canterbury “J” Class (One Design) Owners Association Incorporated.
Ranking Regatta
Event Location
Anzac Bay - Waiheke Island Radio Yacht Club
Awatea Lake, Paraparaumu - Kapiti Radio Yacht Club
Best Island - Nelson Radio Sailing Club Inc
Kai Iwi Lakes
Lake Dunstan - Cromwell Radio Yacht Squadron
Lake Manuwai - Kerikeri Radio Yacht Squadron
Lake Pegasus - Pegasus Radio Sailing Club
Lake Rotomanu - New Plymouth Radio Control Yacht Club
Lake Rotoroa, Hamilton - Waikato Radio Yacht Club
Lake Rua, Harewood - Christchurch Model Yacht Club
Lake Taurikura - Tauranga Radio Sailing Club
Orakei Basin - Oarakei Yacht Club
Quarry Lake - North Shore Radio Yacht Squadron
Regency Lake - Gulf Harbour Radio Yacht Club
Southern Reservoir - Otago Radio Yacht Club
St Mary's Bay, Westhaven, Auckland
Vauxhall Yacht Club
Victoria Lake, Hagley Park - Christchurch Model Yacht Club
Wattle Farm - Northern Marine Model Society
Whitby Lower Lakes - Wellington Radio Yacht Club
Winstones Lake, Otaki - Kapiti Radio Yacht Club
Event Organizer
Christchurch Model Yacht Club
Cromwell Radio Yacht Squadron
Gulf Harbour Radio Yacht Club
Kapiti Radio Yacht Club
Kerikeri Radio Yacht Squadron
Nelson Radio Sailing Club
New Plymouth Radio Control Yacht Club
North Shore Radio Yacht Squadron
Orakei Yacht Club
Otago Radio Yacht Club
Pegasus Radio Sailing Club
Tauranga Radio Sailing Club
Waiheke Island Radio Yacht Club
Waikato Radio Yacht Club
Wellington Radio Yacht Club
Westhaven Radio Sailing
Past and Future Events
Only Past Events
Only Future Events
Events Status
Moved Online
Rescheduled
The World's Local Hobby Shop
Where traditional and digital modelling converge
- Shopping Cart
Welcome to the World's Local Hobby Shop
- Custom-Made Display Cases
- Client Display Cases
- Kits – Amati
- Kits – Artesania Latina
- Kits – Billings Boats
- Kits – Bluejacket
- Kits – Corel
- Kits – Jotika/Caldercraft
- Kits – Pocher
- Tools – My Favourite Tools
- Modeller’s Workshop Designs
- MW kits – 1:16 J-class
- MW Kits – Older AC Yachts
- MW Kits – Power Boats
- MW Kits – Tug Boats
- MW Kits – Sailing Yachts
- MW Kits – Small Fishing Boats
- MW Kits – half-hulls
- Modeller’s Workshop 3D prints
- 1:12 scale 3D printed parts
- 1:16 scale 3D printed parts
- Hull and Deck Planks
- King Plank Systems
- Service – Model Construction
- Traditional Gallery
- Pocher Builds
- Links and Instructions
Enter your search words here
Username or Email Address
Remember Me
Building a J-Class 1/16 scale model R/C sailboat!
As I prepare the build log for these models, here are a few notes about them.
John Hanks III, president of the scale model J-Class Association, has sent me some of these notes. Many thanks to his invaluable help as I research this subject and build up the digital designs for these frames.
From John Hanks’ build notes
Please note that these notes are not yet in any sort of logical order.
The keels are deepened by the 2″ allowed in the AMYA J Class rules as they will all be used for R/C sailing. You will also notice that the rudders are larger than scale to improve maneuverability. The Class Rules were designed to help overcome some of the stability loss that occurs when you scale a full size boat down to a model. The loss of stability happens with all boats that are scaled down to a model size with the smaller the model is compared to the full size version the greater the loss in stability.
Larry Ludwig is the supplier for most of the aluminum masts for the Js. his masts are extruded and come in 10′ sections with each 10′ piece weighing just 1 lb. As far as a source of wood goes I get most of my wood for planking, both deck and hull, and framing from the local home improvement store. I then cut it to the dimensions that I want. The 1/4″ keel material is from the local hobby shop and is 12″ x 48″ 5 ply birch that is used in model airplane construction. I get most of my exotic or fancy wood from a local cabinet shop as trash trimmings usually for free. I buy scrap brass by the pound from the local metal yard and then machine it to what I need. The small brass strap and rod that I use is from the local hobby shop. Dean is the only manufacturer that I know of who could supply ready made metal parts in the correct scale for the deck detail on the J models.
I have used all of the following woods for planking, both deck and hull, in the construction of my Js; pine, bass, alder, aspen, mahogany, spruce and poplar. The choice of the wood for each project was driven by the price and availability of what I wanted.
The fiberglass cloth, resin and disposable brushes were purchased at the local auto parts store. I have purchased lead at the local tire store as scrap wheel weights, shot from the sporting goods store and plumbers lead that I found in a local pawn shop. You could also try your local scrap yard.
The builder must understand that even with a hull kit there will be a certain amount of scratch building that will need to be done in order to complete a sailing model.
Track down a cpoy of Model Yachting #156, Summer 2009. It is an issue that features the J Class and there are several pieces that I wrote that address the AMYA J Class models from history to construction. It should answer most of your questions. I am in the process of doing the same for an upcoming issue of model yachting and I will update all of the pieces that that have been published previously.
There were 2 Endeavours. Endeavour raced against Rainbow in 34. She was a faster boat than Rainbow and Rainbow only won because Sopwith had a labor dispute with his crew shortly before he left England for the US and had to sail with an inexperienced crew as the original crew went on strike. The boat was not sailed to its potential so it lost to a slower but better sailed yacht.
Endeavour II was a completely new boat built by Sopwith to challenge for the 37 cup. Once the challenge was received Vanderbilt had Ranger built to defend the Cup. Endeavour II was a slightly larger yacht than Endeavour with changes to her lines. She was faster than Endeavour but could not compete with Ranger who won convincingly in 4 straight races.
Comments are closed.
Advertisement
©Copyright 2012 modellers-workshop
- 0 £ 0
Refine Products
Gpb price range.
- 1 > 200 (3)
- 201 > 500 (9)
Display Model, Kits, RC
- Display Model (19)
Product Difficulty
Product hull type, product r/c compatible, product scale, vessel types.
- Classic sailing boat (6)
- J class yacht (13)
Manufacturers
J class yacht models.
Showing 1–12 of 19 results
America’s Cup Columbia Model Ship (Standard Range) – AM (AS076F)
Bristol Yacht Model Ship – OMH (Y096)
Columbia Half Hull – GN (HH008P)
Columbia Yacht L – OMH (Y155)
Endeavour Frame hull (Standard Range) – GN
Endeavour Half Hull – GN (HH005P)
Endeavour Half Hull – GN (HH005W-60)
Endeavour Model Yacht (Standard Range) – GN
Endeavour Model Yacht Black / White (Standard Range) – AM (AS155)
Endeavour Model Yacht Red/White (Standard Range) – AM (AS154)
J-Yacht ‘Rainbow’ 1934 Model (Standard Range) – AM (AS152)
J-Yacht ‘Ranger’ 1937 Model (Standard Range) – AM (AS150)
Information.
- Delivery & Packaging
- Cookie Consent
- Secure Payment
- Legal Notice
- Terms & Conditions
Follow us to keep up-to-date using our social networks
ages of sail
- About Us / FAQs
- How To Build Ships
JavaScript seems to be disabled in your browser. You must have JavaScript enabled in your browser to utilize the functionality of this website.
Recently added item(s) ×
You have no items in your shopping cart.
- My Wishlist
- Amati Model Ship Kits & Tools /
- America's Cup /
Endeavour w/ Tools - Wooden Hull (Amati, 1:80)
Availability: In stock
Endeavour J Class with Tools - Amati Wooden Kit
Part #AM1700/10
Scale 1:80 - Total length cm. 48 (18.9") - Height cm. 70 (27.6")
- Add to Wishlist
- | Add to Compare
- Email to a Friend
- Share Facebook
- Share on Twitter
Related Products
Check items to add to the cart or select all
Combo Set #1 - Endeavour - Wooden Hull
Endeavour J Class with Tools - Amati AM1700/10
The yacht Endeavour staked a claim on the America's Cup, winning the first two races. The third regatta was bound to be the most exciting. Fate played an unkind trick to Sir Thoms Sopwith, who failed and thus couldn't win the America's Cup.
Wooden model ship kit features plank-on-frame construction with laser cut keel, frames and deck; double planking in basswood and mahogany; metal and wooden fittings; cloth sails; wooden detailed mast; brass photoetched parts; plans and detailed instructions
Also includes a selection of model building tools.
Be the first to review this product
Product Tags
Use spaces to separate tags. Use single quotes (') for phrases.
- Search Terms
- Advanced Search
- Orders and Returns
Signup for news and special offers!
Welcome Aboard!
You have successfully joined our crew better known as subscriber list.
© 2024 ages of sail
Delivery costs and discount codes are added at checkout
Currency Selection
Prices are currently displayed in GBP (United Kingdom) Select a new currency and country below
- United Kingdom GBP
Filter results
JavaScript appears to be disabled in your browser. JavaScript must be enabled in order to utilise the full functionalilty of this website.
GET A DISPLAY CASE FOR YOUR MODEL BOAT OR AIRPLANE MODEL. ADD IT AT THE CHECK OUT OR CONTACT US
J-Class Yacht Model Endeavour
Overall size: 54 cm (L) x 70 cm (H)
ONLY 1 IN STOCK
Share the love with your friend
Complete the form below and we'll email your friend about this product
- Share on Facebook
- Share on Twitter
- Share on Tumblr
- Share with a friend
You’ll earn 0 reward points with this purchase.
Be one of the first to know!
We’re sorry we’re out of stock but we can let you know as soon as it's available if you enter your email address below.
- Description
- Reviews (9)
Overall dimensions:
Length: 21.25" (54 cm) Width: 4" (10 cm) Height: 27.5" (70 cm)
Indulge in the timeless elegance of the J Class Endeavour yacht, beautifully captured in this handcrafted model.
- This J Class model yacht is lacquer painted for a sleek finish: navy blue and burgundy.
- Supported by a solid wooden stand.
- Handmade wooden model yacht with a very detailed decking and brass fittings.
- The Endeavour J Class model is sold fully assembled including the sails - no need to hook up the rigging.
- Not a kit and not radio-controlled.
- Dispatched from Bristol or Click and Collect.
PLEASE NOTE: All our models are for display and decorative purposes. They are not functioning models and must not be put in water or left outdoors.
Models are shipped via DHL and shipping costs are as follows: UK mainland and Northern Ireland @ £10.50 The Scottish Highlands & Channel Islands @ £35.10 The USA @ £110.00 Please email us to request a delivery charge to your country.
INTERNATIONAL DELIVERY INCLUDING EUROPE: Shipping cost doesn't include customs clearance, import taxes, duty or VAT. The buyer will be liable for payment of all import charges applicable in their respective country. Each country has a different tax rate. We advise buyers to check their government website for further information.
The J Class Endeavour yacht is a sailing yacht that was originally built in 1934 for Sir Thomas Sopwith, a British aviation pioneer and yachtsman. The Endeavour yacht was one of the most famous and successful racing yachts of the J Class, a class of sailboats that were used for racing during the 1930s.
The Endeavour yacht was designed by the naval architect Tore Holm and built by the Camper and Nicholsons shipyard in Gosport, England. She was designed to be fast and sleek, with a 131-foot (40-meter) wooden hull, a towering 173-foot (53-meter) mast, and a total sail area of around 9,000 square feet (836 square meters).
The Endeavour yacht competed in the 1934 America's Cup race against the American defender Rainbow, but was ultimately defeated in a closely contested series of races. The yacht was then sold to a new owner and continued to compete in various racing events throughout the 1930s.
After a period of neglect and disrepair, the Endeavour yacht was purchased by a new owner in the 1980s and underwent a major restoration that brought her back to her former glory. Today, the Endeavour yacht is still actively sailed and is considered one of the most iconic and beautiful racing yachts of all time.
The J Class Association has a wealth of information about the history of the J Class Yachts including the J Class Endeavour.
Really pleased with the model and the outstanding service. Would highly recommend.
Just want to let you know that the model arrived today w/o any issues or damages. Thanks for the very good handling of my order and the good packaging.
Great service throughout & extremely well packed for shipping. A beautiful designed & superbly made model of this class of yacht with attention to detail throughout.
Very nice and competent pre-sales contact. Ship model is beautiful, exactly as on photos. Price/quality ratio very good and I have looked at hundreds of similar sailing yacht model offers. Model arrived 4 days early and in perfect condition. Packaging could resist a nuclear warhead. Almost needed a chainsaw to unpack ;).
The model arrived exactly as scheduled. It was extremely well packed,so arrived in perfect condition. I unpacked it very carefully and it looks beautiful .
Arrived very well packed indeed. First class customer service, very helpful. Purchased as a gift, recipient was delighted.
The model arrived very quickly and has exceeded our expectations. My son is a sailor and has sailed near the actual Endeavour and is very impressed on the detail in the model you have done.
This beautiful model arrived well packed and on time.
We bought ship as a present for our father and it was absolutely perfect! Excellent service - I highly recommend.
Leave a review
Explore our catalogue.
Art Print Battle of Lowestoft | S. J. Lucas
Art Print Zeven Provincien | S. J. Lucas
J-Class Endeavour Half Hull
Model Yacht Pen Duick | Large Scale | Varnished
- Join Newsletter & Get 10% Off Your First Order
Join / Login
Yachts model ship kits & model boats kits.
We have a large range of Yacht model ship kits complete with English instructions and all fittings, making for great yacht model kits. If you are interested in building a ship model kit yacht make sure to have a look at our great range of kits. We offer model kit yachts to build that have featured at the Olympic games, sailed in Americas Cup and more. All yachts offer an elegant reminder of yesteryear.
Filter Products
Skill level.
Showing all 11 results
DRAGON CLASS YACHT – International Class
Yacht America – Schooner 1851
5,5 YACHT – International Class
BRITANNIA – Racing Yacht 1893
ENDEAVOUR – J Class America’s Cup 1934 – 1:35
PURITAN – American Sloop 1885
BRITTANIA – Racing Yacht 1893
RAINBOW – J Class America’s Cup 1934
ENDEAVOUR – America’s Cup Challanger 1934
DORADE – Fastnet Yacht 1931
CORSARO II – High Sea Regatta Yacht 1961
Related articles.
7 Tips For Choosing A Wooden Model Ship Kit
When choosing a wooden model ship kit there are a number of factors that need to be considered. Your overall decision on these factors will influence your selection of a particular wooden ship model kit to build.
How to Plank The Hull of a Bluff Bow Ship Model
Learn How To Plank The Hull of a Bluff Bowed Wooden Model Ship with this Comprehensive 40 Step Build Guide From Modelers Central.
Planking Tips For Building A Model Ship
Most beginners to model Ship Building have some concerns regarding planking, however, provided that some serious thought is given to the subject so that the principles are clearly understood, then it should not prove overly difficult.
Join 18,543 other modelers to hear about specials, new products and modeling tips
- Become a Member
- Modeling Hub
- Model Ship Building
- Maritime History
- Affiliate Program
Information
- Terms & Conditions
- Privacy Policy
Copyright © 2023 Modelers Central. ABN: 31 114 830 732
- Claim 10% Off First Order
- Get 5% off ALL orders with a Membership
- Gift Vouchers
- Help & Advice
Modelers Central. 2023, All rights reserved.
- Claim 10% Off Your First Order
- Get 5% Off All Orders With A Membership
Get 10% off
Your first order.
10% off applies only to full-price items. By providing your email address, you agree to our Terms & Privacy Policy
10% off applies only to full-price items. By providing your email address & mobile number, you agree to our Terms & Privacy Policy and consent to receive marketing messages from Modelers Central at the addresses provided. You can unsubscribe at any time by replying STOP.
- Masting, rigging and sails
- Remember me Not recommended on shared computers
Forgot your password?
J Class Yacht Rigging Question
By David Lester October 14, 2022 in Masting, rigging and sails
- Reply to this topic
- Start new topic
Recommended Posts
David lester.
I am launched into a new project building a J Class yacht for a friend (Amati Shamrock V) and I have a question about the rigging that maybe someone knows the answer to.
The kit provides only natural coloured line (ecru, tan, off-white or whatever you want to call it) and the picture of the model on the box shows all of the rigging (both running and standing) done in this colour. Somehow this doesn't seem right to me. Since this is a 1930's era yacht, would it be correct to believe that the standing rigging would actually have been wire cable. Somehow that seems likely to me. Does anyone out there know?
On my Bluenose model the plans stated that all the standing rigging on that vessel was wire cable and had serving. (I didn't have a serving machine at that time, so just ignored this and simply used black line.) If the rigging on Shamrock V is wire cable, is it likely to have been served as well? Somehow that seems less likely to me. Again, if anyone knows, I'd be grateful.
If the standing rigging is wire cable and is not served, what do people think would be the best colour line to use for it. Simply black, or stick with the ecru line provided or would you do something unusual, such as gray. (I'm not going to try my hand at using actual wire.)
Anyway, any thoughts you have would be much appreciated.
Current Build - St. Roch, Billing Boats; HMS Agamemnon, Caldercraft (on hold)
Previous Builds - Armed Virginia Sloop, Model Shipways; Constitution, Model Shipways; Rattlesnake, Mamoli; Virginia Privateer, Marine Model Co, restoration; Prince de Neufchatel, Model Shipways; Charles W. Morgan, Model Shipways; Pride of Baltimore II, Model Shipways, Bluenose, Model Shipways (x2); Niagara, Model Shipways; Mayfower, Model Shipways; Shamrock V, Amati; HMS Pegasus, Victory/Amati
Link to comment
Share on other sites, roger pellett.
America’s Cup competition has always featured boats built with high tech features to gain a competitive edge. This was as true in the 1930’s as it is today. Furthermore, the very tall Marconi rigs were highly stressed and rigging was tuned (highly tensioned) to provide optimum performance. Stretch had to be minimized. As a minimum the J boats would have been rigged with wire rope. In later years America’s Cup yachts featured solid rod rigging. More research needs to be done to determined which was used.
- mtaylor , allanyed and Bob Cleek
According to Llewellyn Howland III in his biography of W. Starling Burgess, the first large yacht to utilize solid bar rigging was the 1934 America’s Cup defender Rainbow. The bars couldn’t be produced in long enough lengths requiring turnbuckles half way up. Shamrock V would, therefore, have been rigged with wire rope.
Apparently, the J Boats also used wire rope for some running rigging. Burgess, became marooned atop Enterprise’s mast when he used the main halyard to hoist him up. The wire rope halyard was heavier than he was!
- Bob Cleek and mtaylor
2 hours ago, Roger Pellett said: Burgess, became marooned atop Enterprise’s mast when he used the main halyard to hoist him up. The wire rope halyard was heavier than he was!
- mtaylor and allanyed
I know it is a 7 hour drive from Cobourg to midtown Manhattan, but if you can do it, contact the office of the chairman of the Model Committee at the New York Yacht Club to arrange a visit. I think the current chairman is Peter Sweetser. In years past they left me alone for a few hours with the collection to make sketches (but no photos at the time.) Perhaps now they will also allow photos. It is a fascinating collection of over 1200 of some of the best schooner and racing models in the world.
- mtaylor and Roger Pellett
PLEASE take 30 SECONDS and sign up for the epic Nelson/Trafalgar project if you would like to see it made into a TV series. Click on http://trafalgar.tv There is no cost other than the 30 seconds of your time. THANK YOU
Thanks for the input, guys (and the stories too.) That's pretty much what I guessed to be the case. I don't think I'll try using wire for the standing rigging however; I'd never get it lay straight and even and I imagine just a slight touch might put a slight bend in it. I'll probably just end up using black line, but maybe I'll experiment a bit with a metal-like colour.
Allan, thanks for the information about the NYYC model collection. I had a look at their website and I think That would certainly be a great place to visit, however, I don't see a New York adventure in my near future (let's be honest, I rarely leave the basement!)
Thanks again,
Every year during the SNAME conference there is a dinner for Naval Architecture alumni of the University of Michigan. While not a SNAME member, I always get invited. One year the dinner was held at the New York Yacht Club. Unlike most yacht clubs it’s in the middle of Manhattan, not on the water. I was able to schedule other business to be in NYC to attend the dinner. As Allan writes, a visit to the club’s model is an opportunity not to be missed. The model collection is spectacular and I don’t think that they are about to put them in storage to make room for a more “relevant” display.
I would suspect that Shamrock’s wire rigging would not have been served. Designers of these yachts were concerned with the aerodynamics of the rig. They would have tried to minimize the cross sectional area of the standing rigging to cut wind resistance.
Here again, more research is necessary but I believe that the racing rigs were considering to be “temporary.” When these challengers crossed the Atlantic to race, if sailed they did so under reduced rig. Later the Cup Rules allowed boats to be towed or shipped on a steamer. The racing rig was erected upon arrival in the US for competition. Some of the American J’s were furnished with several masts that could be swapped out during the trials. In any case, these boats did not have long lives.
2 hours ago, David Lester said: but maybe I'll experiment a bit with a metal-like colour.
I look forward to following your build log David. I totally agree that using wire is a nightmare. I had more pin holes in my fingers in one session than all the tiny cuts from scalpels over 40+ years. I have a couple spools of the stuff in the shop that will take care of hanging pictures for the rest of my life. Do try getting some metal like thread instead of the wire. Would the wire color be more towards black than grey? It easy to make crimps regardless of the color to avoid serving but I am not so sure seizings and serving was not used on racing yachts 100 years ago, Roger you probably have it right, but was this the norm when Shamrock V was in her racing heyday? I suspect some research should turn up some contemporary photos that will give the answer.
Shamrock V displaces 146 tons. There is a rule of thumb that for a racing yacht the breaking strength of the shrouds should be equal to the displacement. A quick check of a wire rope table says 2” wire rope is 320,000 lbs, close enough. At your scale that would be 0.025”. I don’t know if they were using rod rigging yet, but that would obviously be a little smaller. I doubt they had gone to oval cross section yet to reduce windage.
The pictures of Shamrock in the present day are all clearly rod rigging.
Per my post above, The first J Boat rigged with rod rigging was the 1934 American Cup defender Rainbow.
There is an interesting connection between prewar yacht design and the aircraft industry. Starling Burgess, Rainbow’s designer designed airplanes in the 1920’s, and Sopwith, builder of the famous Sopwith Camel owned one or more of the British challengers. Designers of these high performance yachts, therefore, would have followed developments in building high performance aircraft. Burgess was also involved in the application of aluminum for boats and cars. Burgess used proprietary fittings for attaching rigging to Rainbow’s spars and the hull.
High quality small diameter diameter wire rope can be bought from fishing tackle suppliers. It is used for towing “downriggers,” heavy lead weights used to control depth of fishing lines. I also have a stash of very small diameter stranded wire cable that I used many years ago in an unsuccessful attempt at control line model airplane flying.
You can find small multi-strand wire in jewelry supplies in hobby stores.
I have some Beadalon brand 7 strand at 0.012", (0.30 mm) 0.015" (0.38 mm) and 0.018" (0.46 mm) diameter. I also have some nylon coated Cable Strand Corp. Acculon brand 3 strand at 0.012" (0.30 mm) diameter.
Current build: https://modelshipworld.com/index.php?/topic/19611-albatros-by-dr-pr-mantua-scale-140-about-1815/&tab=comments#comment-601276
Previous build: https://modelshipworld.com/index.php?/topic/19321-uss-oklahoma-city-clg-5-1971-3d-cad-model/
I have no love for working with any kind of wire, but that has been my experience so maybe time for another try using the wire you mention. Are you using crimps or some other securing method and do you find it difficult to keep things tight? Pictures???? Thank you very much.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
× Pasted as rich text. Paste as plain text instead
Only 75 emoji are allowed.
× Your link has been automatically embedded. Display as a link instead
× Your previous content has been restored. Clear editor
× You cannot paste images directly. Upload or insert images from URL.
- Insert image from URL
- Submit Reply
Recently Browsing 0 members
- No registered users viewing this page.
Modelshipworld - Advancing Ship Modeling through Research
SSL Secured
Your security is important for us so this Website is SSL-Secured
NRG Mailing Address
Nautical Research Guild 237 South Lincoln Street Westmont IL, 60559-1917
Model Ship World ® and the MSW logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,929,264 & No. 6,929,274, registered Dec. 20, 2022)
Helpful links.
- Articles Database
- NRG Home Page
- NRG Online Store
- Important: Our Guidelines
- Terms of Use
- Buildlog Index
About the NRG
If you enjoy building ship models that are historically accurate as well as beautiful, then The Nautical Research Guild (NRG) is just right for you.
The Guild is a non-profit educational organization whose mission is to “Advance Ship Modeling Through Research”. We provide support to our members in their efforts to raise the quality of their model ships.
The Nautical Research Guild has published our world-renowned quarterly magazine, The Nautical Research Journal, since 1955. The pages of the Journal are full of articles by accomplished ship modelers who show you how they create those exquisite details on their models, and by maritime historians who show you the correct details to build. The Journal is available in both print and digital editions. Go to the NRG web site (www.thenrg.org) to download a complimentary digital copy of the Journal. The NRG also publishes plan sets, books and compilations of back issues of the Journal and the former Ships in Scale and Model Ship Builder magazines.
Our Emblem ®
Nautical Research Guild ® and the NRG logo are Registered Trademarks, and belong to the Nautical Research Guild (United States Patent and Trademark Office: No. 6,999,236 & No. 6,999,237, registered March 14, 2023)
- Existing user? Sign In
- Latest Posts
- All unread content since my last vist
- Unread topics I have posted in
- Create New...
Woman struck by boat propeller at New Jersey shore dies of injuries
The Associated Press
August 26, 2024, 12:18 PM
- Share This:
- share on facebook
- share on threads
- share on linkedin
- share on email
HARVEY CEDARS, N.J. (AP) — A New Jersey woman trying to board a boat from a raft over the weekend was killed when she was struck by the propeller, police said Monday.
Zeina Mahafzah, 18, of Wayne, New Jersey, was in a raft being pulled by a boat Sunday afternoon in Sunset Park when she tried to get into the vessel, New Jersey State Police said in a statement. An investigation is underway.
Sunset Park is a recreation area in Harvey Cedars on Long Beach Island.
Copyright © 2024 The Associated Press. All rights reserved. This material may not be published, broadcast, written or redistributed.
Related News
Grand Canyon’s only water pipeline fails, prompting shutdown of overnight hotel stays
Wimbledon champion Krejcikova out of US Open, Shelton and Tiafoe set to meet in 3rd round
Winning numbers drawn in Wednesday’s Powerball
Recommended.
'We will never forget that': DC police officer killed after being accidentally shot while retrieving suspect's weapon
Pool season doesn't have to end yet — just borrow someone else's
Washington Commanders' new regime continues purging remnants from Ron Rivera's time in charge
Related categories:.
- SI SWIMSUIT
- SI SPORTSBOOK
- Other Sports
Despite Wide Receiver Injuries, Ole Miss QB Jaxson Dart Thinks Rebel Offense is 'In a Good Spot'
John macon gillespie | aug 27, 2024.
- Ole Miss Rebels
The No. 6 Ole Miss Rebels will open their season on Saturday evening, and that brings the potential of another strong year for a Lane Kiffin-coached offense.
Senior quarterback Jaxson Dart is leading the way for the Rebels this season, and he took a massive step forward in his progression a year ago. In 2023, Dart threw for over 3,300 yards and 23 touchdowns paired with just five interceptions, less than half of his turnover total the year prior.
Despite the explosive nature of Ole Miss' offense last year, its quarterback believes they could be in an even better situation as the 2024 season gets underway.
"I feel like we're in a good spot," Dart said on Monday. "I feel like we're in a better spot than we were last year. I think a big part of it is the returning guys that we have coming back, just the leadership we have on that side of the ball. We're able to go more in-depth and do more creative things.
"When you have a lot of guys who have a ton of football experience and played ball for a really long time, they pick up on things quick. I think each week we're able to execute at a higher level, and I feel like we're in a really good spot."
Some of those veteran pieces have dealt with injuries during fall camp , however. On Monday, Lane Kiffin stated that he was uncertain whether or not wide receivers Jordan Watkins and Juice Wells would be available in the season opener this weekend, but that doesn't dampen Dart's mood about this offense's potential.
He has seen growth from some of the younger wideouts on the roster this offseason, and he has faith in their abilities.
"I think guys like Cayden Lee, Ayden [Williams], Noreel [White], Josh Aka, those guys have had great camps," Dart said. "Just getting better each and every day, and they've been super impressive guys to watch and throw the ball to.
"We've got a lot of weapons from the guys that are coming back, the older guys to the younger guys. I'm happy with the progression they've made and the standard of excellence they want to go out and play with each and every day."
With the receiver injuries in mind, Kiffin also stated on Monday that he is pleased with the current production out of his running back room, and Dart echoed that sentiment. A strong run game makes his job as a quarterback easier, and he is excited to see what this new-look unit can produce.
The Rebels lost Quinshon Judkins to the transfer portal during the offseason, so the Ole Miss rushing attack will be led by returner Ulysses Bentley IV and transfers Henry Parrish Jr. and Rashad Amos.
"I've been stoked about it," Dart said. "When you bring in a new running back room entirely pretty much, it's fun to see what those guys can do. ... It's actually been some production that I'm thrilled to have.
"Just watching those guys compete each and every day has been a lot of fun, and they're all tremendously talented. I'm excited for that room, and I think it's probably the most underrated part of our team this year."
Kickoff on Saturday between Ole Miss and Furman is scheduled for 6 p.m. CT on SEC Network+.
JOHN MACON GILLESPIE
John Macon Gillespie is the publisher of The Grove Report and has experience on the Ole Miss beat spanning five years.
Follow JMakeGillespie
IMAGES
VIDEO
COMMENTS
This is a quick overview of the building process that is needed to build a model J boat. Below is a list of most of the materials that were used. WOOD. 2 - 1"x8"x8' pine, aspen, bass or other suitable wood that can be cut into 5/32"x3/8" strips for hull and deck planking.
A Brief History of the Canterbury J Class Model Yacht. Sailing at the Christchurch Model Yacht Club [CMYC] in 1996-1997 there was a small classic J Class model yacht named RANGER with a length of 1.2 metres and this was owned by Dave Heanly. This yacht was J1 which was eventually purchased from Dave and is now on display in the CMYC club rooms ...
The J class yachts are 1/16 scale versions of the original 1930's J-boats only, making it the largest of all the RC yachts. These classic yachts recreate the style of yachting's Golden Era, on a grand but affordable scale. ... These encompass free-sailing model yachts, older designs converted to R/C and pre-1970s R/C sailing models. There are ...
J Class Yacht Models. Showing the single result View Product. Sale! Pen Duick Model Yacht (Standard Range) - AM (AS053) USD $ ... J-Yacht 'Ranger' 1937 Model (Standard Range) - AM (AS150) USD $ 264 Original price was: USD $264. USD $ 231 Current price is: USD $231. View Product. Sale!
Canterbury J. The Canterbury J Class model originates from the Christchurch Model Yacht Club in New Zealand in response to the problems the club members were experiencing sailing models with finned keels in weedy conditions, a problem that all model yacht skippers will be very familiar with and the Canterbury design is a practical solution that remains very relevant to current social and ...
Feel free to contact me on [email protected] if you have any questions. You can also phone on 07969 538626 but I'm often out of the country and calling can be expensive.
1/16th scale AMYA J Class Model Yachts from the 1930's. San Francisco Model Yacht Clubs 125th anniversary. J Class Yachts For Sale (Sail) Home; Upcoming Events; Rules; AMYA J CLASS History; ... San Francisco Model Yacht Clubs 125th anniversary. San Francisco Model Yacht Clubs 125th anniversary.
The J Class models are 1/16th scale hulls of the J Class yachts that sailed for the America's Cup from 1930 through 1937 as well as the yachts that were converted to the J Class and competed with the America's Cup yachts in club regattas. The models are the largest recognized class in the AMYA with hull lengths ranging from about 7 feet in ...
The J Class model range consists of two J Class hulls, the Nottingham 48 and the Nottingham 60, each of which can be built to carry either bermuda rigs, gaff rigs and coming shortly a genoa rig. In addition I'm nearing the end of the development of the International Dragon, a little under 60 inches and designed from outset to carry a genoa rig ...
The Canterbury J class history. In 1998 weed was the scourge of the Christchurch Model Yacht Club at Lake Victoria, making sailing long fin boats almost impossible. At this time Dave Heanly had purchased a commercial glass fibre hull of a traditional long keel yacht.
The keels are deepened by the 2″ allowed in the AMYA J Class rules as they will all be used for R/C sailing. You will also notice that the rudders are larger than scale to improve maneuverability. The Class Rules were designed to help overcome some of the stability loss that occurs when you scale a full size boat down to a model.
Our J-Class yacht models and racing yachts are for display and decorative purposes only - they are not functioning models and cannot got in the water. Our selection of stunning sailing model yachts includes the J Class Endeavour, Pen Duick and America's Cup racing yacht Australia II. These sailing model yachts are lacquer painted for a sleek finish, except for the large scale Pen Duick. They ...
J Class Yachts; Liners and Model Cruise Ships; Modern Yachts & Boats; ... J Class Yacht Models. Showing 1-12 of 19 results. View Product. Sale! America's Cup Columbia Model Ship (Standard Range) - AM (AS076F) £164. View Product. Sale! Bristol Yacht Model Ship - OMH (Y096) ...
1.1.The J Class Model Yacht is a restricted design model yacht class. The purpose of these rules is to create a class that represents the spirit and beauty of the original J Class Yachts as they sailed in the 1930s. In that vein the hull and deck must be as close to the original as possible in shape unless otherwise specified in the rules 1.2 ...
Details. Endeavour J Class with Tools - Amati AM1700/10. The yacht Endeavour staked a claim on the America's Cup, winning the first two races. The third regatta was bound to be the most exciting. Fate played an unkind trick to Sir Thoms Sopwith, who failed and thus couldn't win the America's Cup. Wooden model ship kit features plank-on-frame ...
Discover the timeless elegance and legendary performance of the J Class Endeavour yacht. Immerse yourself in the rich heritage of sailing as you embark on a journey aboard our meticulously crafted yacht models. Every intricate detail, from the meticulously crafted decking to the elegant brass fittings, adds to the allure of this stunning model yacht.
J Class yachts Velsheda, Topaz and Svea downwind legs. The J Class is one of several classes deriving from the Universal Rule for racing boats. The rule was established in 1903 and rates double-masted racers (classes A through H) and single-masted racers (classes I through S). From 1914 to 1937, the rule was used to determine eligibility for ...
The J Class yacht model is 70 cm tall. Indulge in the timeless elegance of the J Class Endeavour yacht, beautifully captured in this handcrafted model. Adorned with a lustrous navy and burgundy lacquered paint, this sailing masterpiece exudes a sleek and sophisticated glamour.
This classy model yacht J Class Endeavour is 70 cm tall. It's a scratch built sailing yacht model. It is not a kit. This stunning wooden J Class model is sup...
Canterbury J Radio Sailing. Public group. ·. 491 members. Join group. This group promotes the building, sailing , and racing of Canterbury J yachts. The group is a meeting place open to all fellow enthusiasts and those...
Some of the most amazing, fabulous, epic J Class yacht racing footage with beautiful music for you to enjoy during #quarantine #covid19 #stayhome #thankyouho...
Yacht Model Kits Are The Perfect Introduction To Model Ship Building. Modelers Central The Home Of Wooden Model Builders. Order Online For Fast Delivery. ... ENDEAVOUR - J Class America's Cup 1934 - 1:35 $ 500 Pre order Now! Out of stock. PURITAN - American Sloop 1885 $ 276 Read more. BRITTANIA - Racing Yacht 1893
Shamrock V displaces 146 tons. There is a rule of thumb that for a racing yacht the breaking strength of the shrouds should be equal to the displacement. A quick check of a wire rope table says 2" wire rope is 320,000 lbs, close enough. At your scale that would be 0.025".
Bayesian was a 56-metre (184 ft) sailing superyacht, built as Salute by Perini Navi at Viareggio, Italy, and delivered in 2008. [7] It had a 72-metre (237 ft) mast, one of the tallest in the world. The yacht was last refitted in 2020. [8] It was in the legal ownership of Angela Bacares, wife of the technology entrepreneur Mike Lynch. [9] [10] It was at anchor off the Northern coast of Sicily ...
The yacht's mast stood 72.27 meters (237 feet) high above the designated water line, just short of the world's tallest mast which is 75.2 meters, according to Guinness World Records.
HARVEY CEDARS, N.J. (AP) — A New Jersey woman trying to board a boat from a raft over the weekend was killed when she was struck by the propeller, police said Monday. Zeina Mahafzah, 18, of Wayne…
Oct 7, 2023; Oxford, Mississippi, USA; Mississippi Rebels running back Ulysses Bentley IV (24) reacts after scoring a touchdown during the second half against the Arkansas Razorbacks at Vaught ...
Sep 9, 2023; New Orleans, Louisiana, USA; Mississippi Rebels quarterback Jaxson Dart (2) calls for the ball against the Tulane Green Wave during the first half at Yulman Stadium.