small sailboat plans free

15 Free Boat Plans You Can Build This Week (with PDFs)

August 13, 2023

Boatbuilding is one of the most ancient forms of craftsmanship still alive today. As long as our ancestors have had a curiosity about exploring open waters, they have been practicing and honing their boatbuilding skills.

To be honest, however, building a boat is no small task. It will require a lot of work and patience to ultimately create a finished product that you are happy with and that is actually seaworthy.

Of course, we have also included a few free boat plans. You can keep in your back pocket for the next time you are asked to build a cardboard boat as part of a contest or lakefront teambuilding adventure.

We hope that these resources help you in your journey to build your own boat!

Photo by SeventyFour via Shutterstock

Free Boat Plans

The Wanigan
The Slipper

The Handy Andy

The Jolly Roger
The Hobby Kat

The White Duck

The Sea Midge

The Crazy Cardboard Boat

Why Build Your Own Boat?

Photo by Halsey via Shutterstock

There are a lot of reasons why you should explore building your own boat versus buying a pre-made model. Here is a quick breakdown of the most obvious benefits:

You will know the ins and outs of your finished boat better than anyone
It can be a great project to work on with your teenage or even adult children
You will gain valuable skills molding and shaping wood and other materials
You can design your boat for your specific needs
You don’t have to trust the sometimes-questionable manufacturing of mass-produced boats
You can create a boat that functions as your second home on the water
You can save money if you source materials mindfully

Of course, most first-time boatbuilders still experience some level of trial-and-error. With patience and perseverance, however, you can craft a one-of-a-kind vessel that has no equal anywhere in the world.

Free Boat Plans You Can Build This Week (with PDFs)

1. the wanigan.

PC Duckworks Boat Builders Supply

The Wanigan boat began as a garvey design, which is one of the older boat plans known to the Americas. Traditionally, these boats were built as work scows and were very popular among American summer camps.

The design itself is very simple, but these boats can carry heavy loads. It can also handle a trolling motor being mounted to the stern so you can cover more ground if you want to use it as a fishing boat.

The creator of this boat plan became aware of some of the downsides of the garvey design, such as the heavier weight that made it less efficient than some other designs. So he combined elements of dory and wanigan designs to create a hybrid.

The main changes include an enlarged beam, tilted lathes to provide a stiffer hull, and knocking off the top strakes to reduce the boat’s overall weight.

The Wanigan text

These additional The Wanigan drawings Â may also prove useful for your build process!

2. The Mouse

The Mouse is one of the most compact and nimble boat plans we have found for this list. It is an easy build and also a great boat for two kids or a single teenage paddler.

The original builder began with a one-sheet boat design in an effort to create the lightest and most affordable boat possible. This means it is only suited for calm waters and should not be used in high winds or wavy conditions.

That said, it was built in roughly 12 to 24 hours of work time and doesn’t require a full workshop to construct. The main material that is required for building this boat is quarter-inch plywood. But the builder recommends using one-inch by half-inch pine or something a little sturdier.

The plywood and pine components are held together using a method called ”˜stitch and glue’. This method requires choosing one of the best glues for kayak outfitting , which are typically made of epoxy and glass tape rather than something cheaper like polyurethane.

The Mouse Instructions

Also, here are a few extra useful The Mouse Notes for builders

3. The Slipper

The Slipper is the first of many sailboat plans on our list and it is faster, easier, and cheaper to build than most. It also features a deeper cockpit than many other sailboat designs, which makes it safer for intermediate sailors.

This sailboat plan features dual steering stations so that you can sail from inside or outside of the helm. It also includes a centerboard trunk that hardly intrudes into the cabin at all. So that, it is easier to work around while you are in the cockpit.

The exterior hull and cabin of this sailboat feature a modified dory design using two sheets of plywood ripped to three feet wide before being joined together. The resulting hull is a modified V-shape that reduces drag.

The centerboard of this boat can also be winched up to the level of the top of the cabin or lowered down to alter the draft. This allows you to customize the boat design for a stiffer and more weather-worthy vessel if you need it.

The Slipper was also intentionally designed with an aft cabin that naturally helps to keep the bow pointed into the wind whether you are underway or the boat is anchored in the port.

The Building Slipper

4. The Handy Andy

PC DIY Wood Boat

The Handy Andy is a great little 10-foot portable rowboat for hunting, camping, fishing, and other recreational uses. It is actually the only folding boat design on our list, which makes it best for folks that need the most portable boat plan possible.

This boat features a 42-inch beam and a depth of about 15 inches at the mid-section. It also weighs roughly 80 pounds when assembled and can handle up to three average-sized human passengers.

The design boasts a flat bottom with canvas-bound edges and the primary material used for construction is â…œ-inch marine-grade plywood. Despite its lightweight nature, this rowboat can handle trolling motors or even outboard motors with a maximum of five horsepower.

Once finished, the hull can be folded or unfolded in less than a minute’s time.

This design makes it one of the only boats on this list that can be stored in a truck bed or easily carried by two people to be launched at more remote locations.

5. The Junior

If you are looking for an all-purpose dinghy that can handle almost any use you might imagine, look no further than The Junior free boat plan. It can carry three or four average-sized adults and is much easier to row than a traditional dinghy.

It is also durable enough to be equipped with a small outboard motor. You could even set it up with sailing equipment if you want to use it as a sailing vessel. As we said, this is truly an all-around boat design!

This boat plan requires constructing three frames that will provide the majority of the load-bearing support. The builder recommends using Â¾-inch framing with â…œ-inch plywood as the exterior material for this boat build.

Resin glue and flathead screws are also required to hold this boat together. But there is a full list of materials included in the plans we have linked to below. Sticking to that plan should also give you enough leftover materials to construct two six-foot oars for rowing this boat until you install a trolling motor or outboard motor down the line!

6. The Jolly Roger

Channel your inner Captain Morgan when you are following these plans to build your very own Jolly Roger boat. This flat bottom boat design is designed for pond fishing . It can also be a useful yacht dinghy for getting from your dock to a larger vessel anchored offshore.

The plan follows conventional dinghy construction methods but also includes a few modifications that will save you time and energy. The wide design is super stable for boaters of all ages.

The keel, frame, chines, and risers are all cut from Â¾-inch oak, ash, or any other trusted hardwood you can get your hands on. For the smaller components, the builder recommends using cedar, cypress, fir, or white or yellow pine.

Because this boat plan is also sturdy enough to handle a small motor, it includes important points for protecting the wooden hull from spark plug damage.

Be careful to follow these guidelines to build the safest boat possible if you imagine installing a motor down the line.

The Jollyroger

7. The Cork

The Cork is another simple rowboat design. This one trends away from the flat bottom plans that we have included thus far. Instead, it features a deeper, V-shaped hull that makes it better suited to more efficient rowing and easier maneuverability.

It can be rowed easily from either seating position and is durable enough to handle up to three average-sized adult passengers. The ends of the boat are identical, which allows for multi-directional rowing.

The list of materials required for this boat plan should cost you between $30 and $50, depending on your location and hardware costs there. The resulting build is lightweight enough for two people to be carried and also to be transported on top of a vehicle .

Inside the boat, the builders use aluminum tubing to secure the struts that hold the seats. This material choice keeps the overall weight of the boat down while still adding the necessary rigidity across the beam of the boat.

8. The Hobby Kat

The Hobie Cat is one of the most iconic and recognizable small sailing vessels ever made. This Hobby Kat plan is your answer to building your own iconic sailboat without spending thousands of dollars.

Your finished boat will be able to handle speeds of up to 20 miles per hour. It will be a super fun vessel for windy days on the lake or bay. The builder was able to construct the hulls, decking, and rudder for this boat while spending little more than $200.

From there, they purchased and installed the mast, boom, sail, and rigging, which brought the total amount spent to roughly $650 (still much less than a name-brand Hobie!). Without the mast and sail, this boat weighs roughly 165 pounds and is constructed using primarily 3/16-inch marine plywood.

You can also elect to build your own mast, boom, and sail if you have the time and skills to do so.

Those elements are not included in this boat plan, but they do offer some recommendations for where to buy these components!

The HobbyKat

9. The Tern

Named after the common seabird found around the world, the Tern is a lightweight and nimble sailboat with a 72 square foot base design. She is made for inland sailing and planes very well in moderate breezes.

The hull design also provides minimal water resistance and the small floor plan makes this boat easier for intermediate sailors to handle. Even though it offers a small footprint, this boat is sturdy enough to handle up to four adult passengers.

One of the best things about this boat plan is that it can be built almost entirely by using only common hand tools.

Of course, you can speed things up if you have power tools and you are skilled enough to use them correctly.

The Tern boat plan includes a 20-foot mast, but you can shorten that length if you desire. The plan includes a complete list of materials and step-by-step instructions on how to plane and assemble each element.

10. The Falcon

As you might expect from its name alone, the Falcon is an incredibly speedy sailboat for its size. It boasts a 14-foot centerboard and can handle two to four passengers, depending on its size and weight.

In tests of the original build, the creators claim that this boat out-distanced many Snipe and Comet sailing vessels as well as pacing evenly alongside longer 18-foot sailboats. When finished, your boat will have a six-foot beam and a total weight of roughly 475 pounds.

For the main framing components, they recommend using white oak and plywood will be the main material used in the hull construction. The hull features a V-shaped that was inspired by larger schooners.

The Falcon is best suited to sailing on bays, lakes, and wide rivers. It is also a boat plan with just under 120 square feet of deck space and it is a great build for amateur craftsmen and sailors.

11. The White Duck

The White Duck is a flat-bottomed rowboat with a total length of 13’6” and a four-foot beam. The cockpit is approximately 15 inches deep all the way around and this boat can handle up to five passengers while maintaining buoyancy and stability.

When fully constructed, it will weigh roughly 200 pounds, but the final weight will depend on the type of lumber you choose for your build. This boat plan features plywood planking over solid wooden frames.

The White Duck is built with a pointed bow that cuts nicely through the water. The flat stern of this boat design will make it easy to attach a small outboard motor with a maximum of six horsepower.

As you might expect from its name, this rowboat is a great option for duck hunting trips. That being said, it is a highly versatile craft that can also be used for pond fishing or casual rowing on your nearby lake.

12. The Sea Midge

The Sea Midge is one of the smallest rowboats on our list and it is ideally suited for one average-sized rower or two small paddlers. It is only about 8 feet in length and offers a 52-inch beam at its widest point.

The Midge’s small dimensions make her ideal for navigating narrower creeks and streams. With an approximate weight of 62 pounds, she is easy to maneuver on the water and can also be much more easily transported than some of the larger boat plans on our list

The Seamidge

13. The Zephyr

The Zephyr is a compact and speedy dinghy sailboat that measures roughly 14 feet long and approximately five feet across. This boat style was originally developed for safely crossing the English Channel. This means it can stand up well in rough waters.

When finished, it is also light enough to be transported on a small trailer or on top of a larger vehicle.

The boat plan calls for using hemlock or fir for the framing and oak or Douglas fir for the keel and chines.

14. The Gypsy

The Gypsy is a small cruising sailboat that is meant to be equipped with an outboard motor for powered locomotion. The original design resulted in an incredibly seaworthy vessel that logged more than 6,000 nautical miles in her lifetime.

It includes a comfortable cabin that makes it well-suited for multi-day sailing adventures. This boat plan includes improvements on the original design that will help you build an extremely durable and long-lasting sailboat.

The Gypsy boat design will help you construct a vessel that can handle a motor up to 25 horsepower so that you can enjoy cruising speeds of up to nine miles per hour.

While it may require a bit more of an investment in time and money, it will also help you produce one of the best boats you can build with a free boat plan!

15. The Crazy Cardboard Boat

PC Saint Dominic Catholic School

Finally, let’s talk about a crazy cardboard boat plan that you can build in less than a day. This is a great boat plan to bookmark for your next teambuilding project so that you can earn bragging rights with your coworkers.

The plan calls for using 1.5 sheets of cardboard. But you can use the remaining half sheet to build your own boat paddle if you want to get creative.

Triple-thick cardboard is best for this boat plan. But you can always double up thinner sheets if that is all you can find.

These plans include an easy-to-follow diagram for marking, cutting, and folding the cardboard sheets to create the hull of your boat. From there, it calls for using contact cement and construction adhesive to seal the edges and corners.

If you are looking to save a little money on this build you could also use duct tape and then wrap the entire design in plastic sheeting to provide waterproof qualities.

Overall, this build is one of the cheapest and easiest on our list. It is also a great project for hot summer camp days on the lake or river!

15 Free Boat Plans You Can Build This Week (with PDFs) – Final Thoughts

Photo by Alexandra Soloviova via Shutterstock

We hope that you now have a couple of free boat plans to inspire you to begin your own construction project.

Don’t hesitate to check out YouTube for some useful boat-building videos when you are getting into the nitty-gritty of these build processes!

Enjoyed 15 Free Boat Plans You Can Build This Week (with PDFs)? Share it with your friends so they too can follow the Kayakhelp journey.

Share on pinterest.

I’m Pete. I am the owner of KayakHelp.com. I was born and raised in Cleveland, Ohio, I grew up kayaking, fishing, sailing, and partaking in outdoor adventures around the Great Lakes. When I am not out on the water, you can find me skiing in the mountains, reading my favorite books, and spending time with my family.

More to explorer

The Pintail Canoe Plan – Free Download

The Pintail Canoe: A Compact and Maneuverable Vessel for Small Waters Are you in the market for a canoe that’s perfect for

The Redwood Canoe Plan – Free Download

Building Your Dream Canoe: Redwood Canoe Plan Are you ready to embark on a unique and rewarding DIY project? Check out the

The Crazy Cardboard Boat Plan – Free Download

Build a Cardboard Boat in a Day: A Crazy Team-Building Project Are you looking for a fun and unique team-building project that

Affordable Sailboats You Can Build at Home

‍ Key Takeaways

There are many sailboats that anyone can build from home depending on tastes
Budget will be the biggest deciding factor on a majority of the process
Consider kits that come with most of what you need or choose ones that are all-inclusive
Design complexities and new materials may make the building time process longer
Plan the best you can ahead of time to save money and your working hours

‍ Buying a sailboat can be expensive, but building your own can save you money. So what are sailboats you can build from home?

Sailboats that you can build from home will likely be a small boat under 20 feet. These could be from many different boat suppliers such as B&B Yachts, Brooks Boat Designs, and Chase Small Craft. Boat plans will vary based on your budget and how much time you have on your hands.

Based on my previous experience, building your own boat will take much longer than if a professional were to do it. You also have to be able to study plans, consider various sailboat designs, and have tons of supplies such as fiberglass tape or fiberglass cloth. On top of that, you will also have to be good with your hands.

Table of contents

‍ Top 10 Affordable Sailboats Anyone Can Build at Home

Building your own pocket cruiser or other styles from boat plans is an impressive feat, as this will need dedicated time and money to assure your boat sails safely. Boat building takes a lot of patience as well, especially since this will not be completed in a fast manner.

Finding boat plans and materials that fit your budget will be key to being able to complete the project. The time it takes to complete these projects will vary on your overall experience and needs. Below are 10 of the most affordable sailboats that you can build in the comfort of your home.

B&B Yachts

B&B Yachts have 14 different boat plans you can choose from to find the boat of your desires. Their shop is located along the Bay River in North Carolina where they construct all of the kits and have a 100 foot dock to show off your project once you complete it.

One popular model to check out is their Core Sound 15, as it is the perfect size for those wanting to build a modest size boat for a handful of people on board. Their website features some videos of completed projects and the plans or kits for purchase.

14 different models to choose from plus some dinghies
Various monohull and multihull options
Friendly customer service with attractive prices
Might be too many options for some that are indecisive
Not ideal for those wanting to have a motor sailer

Brooks Boat Designs

Brooks Boat Designs has a handful of options to consider for your next sailboat building project. They are located in Brookline, Maine and give the option to buy the kits or have them build one from scratch for you. They have plenty of knowledge, so do not be shy to ask about modifications or custom features you are looking for.

Depending on your specifics, they can attempt to accommodate some of their plans to help fit your desired outcome. By checking out their site, you can see many examples of their construction in progress and what the boats will look like when completed.

Offers a variety of kits
Plans vary around $50 and up, while materials will obviously add more costs
Some plans can be rowing boats that can convert to sailboats
Might take a while to hear back from them, as their contact section is a little outdated
Their plans may not accommodate a ton of extras for your taste

Chase Small Craft

Chase Small Craft offers a simple process for building boats. Their kits are equipped with everything you need and will help save you time than just buying the materials outright and other parts you could need. This is arguably one of the best bang for buck instances if you want to save time and money searching for pieces to your boat.

They are located in Saco, Maine and will ship everything to your home from there. All the necessary materials are included and all you need are the proper tools and working space.

All-inclusive kits with what you need
Tons of knowledge on their site for boat building
Easy process to order and customize
Complete kits can range over $20,000 for larger boats
Kits may take up to eight weeks to ship out

Chesapeake Light Craft

You can expect high-quality boat kits from Chesapeake Light Craft . They feature 18 different sailboat kits that vary from eight to 20 feet in length. This should be more than enough to find one for you if you are newer to boat building.

They also have a wide variety of other kits in addition to the sailboat, in the event that you wanted to order a small kayak or paddleboard in addition to your sailboat. The prices vary considerably when considering a small or larger boat, so check the complete list of options to in order to potentially fit your needs.

Plenty of sailboat offerings to choose from
Different beautiful hull form options to consider
Easy to build and perfect for sailing
Only has basic materials needed for kit, so you may need to purchase other items
Has epoxy shipping fee no matter if you pick up item

Dudley Dix Yacht Design

Dudley Dix Yacht Design has an extensive list of plywood and single skin sailing boat options. They have plenty of sail plans and kits to consider depending on your goals. These follow a classic look for sailboats, which are aesthetically pleasing.

If you are wanting one to accommodate a small family, they have more than plenty to look through. The cost is not as bad compared to others, but keep in mind that you may need to throw in your own supplies or specific tools to get the job done.

Plans start at $30 and range up to $7,500 or more for kits
More than enough of options to consider
Affordable variety of sailboat offerings
Might be too many options for those new to sailing
Most are wood without the use of aluminum or steel

Farrier Marine

If you are in search of a multihull to build, then Farrier Marine is what you need. They offer a unique folding catamaran that is trailerable and give you the option to build it yourself. This not only makes it an appealing option, but anyone can take this multihull boat wherever they want with ease.

It features a thorough construction guide once you receive all of the materials. These also come with stainless steel fasteners and an aluminum mast for high-quality materials. Pricing will vary since you must request which model type you are considering.

Ability to build a unique catamaran
In-depth construction guide to help
Easily handled and trailerable
Price may be too high
Limited offerings since only a few multihull options

Glen-L Marine Designs

Building a boat from Glen-L Marine Designs can save you time and money. They feature an easy system to order and receive the kits, as well as an in-depth guide to building them. This is an appealing option compared to most boat kit sellers.

The beauty about Glen-L is that anyone can build these from scratch, so you do not have to be the best boat builder in the world to get it done. They offer guides and helpful insights from their team to point you in the right direction. Plans vary around $15, while kits can range well over $1,000 depending on boat size.

Nearly 50 designs to choose from
Complete guide to help anyone build it
Plenty of price points depending on size
Might be overwhelming with the amount of options
Could take a while to get parts since they are popular

John Welsford Boat Designs

John Welsford Boat Designs invites new and veteran boat builders that want a taste of quality small wooden boats. The boat plans are designed to meet your specifications and are catered to your desires.

There are seven sailboat designs to choose from so you do not feel overwhelmed in the process. However, they do not sell kits all the time, so you would need to have the materials or be on the lookout for the best prices when they are available.

Seven sailboat plans with different sizes
Quality boat builder and supporting community
In-depth knowledge provided to you when you order
Might be too small of boat size
Kits are not always available

Iain Oughtred

There are plenty of options on the wooden boat store, but you should narrow down your search for Iain Oughtred’s line of sailboat kits and plans. There are 25 different plans to choose from, which should accommodate most everyone looking to build their own boat.

While they do offer some kits, they do not routinely offer sailboat kits. You would need to purchase all of the materials if you are considering one of their sail plans. Keep this in mind if you are considering, as you would need to hunt down the parts yourself.

25 different sailboat plans to look through
Various sizes to contemplate for you sailing needs
Prices will vary but are not bad compared to market
No sailboat kits, only plans
Newer boat builders might find too many options unappealing

Paul Gartside Boat Builder and Designer

Gartside Boats is a boat builder company based in Long Island, New York that showcases a variety of boats from traditional and newer methods of boat building. Within that variety, they have boat plans meant for six to 50 feet in length.

With an abundance of options, you will need to contact them regarding prices and any customizable options. Kits may vary as well, as they typically design in-house and build for you.

Experienced boat designer that can accommodate with custom plans
Many options are trailerable
Can have plans for up to a 50 foot boat
You will need to contact them for prices
Customized options may make process more complicated for new boat builders

How Much Does it Cost to Build a Sailboat at Home?

As you have likely already done so, the math between building your own boat and buying one may be a huge difference. Likewise, you may even enjoy the challenge of taking an older boat that is gutted and restoring with parts from a kit to build one new again.

But how much does it cost exactly to build a boat from the comfort of your own garage or workshop? The prices are going to vary dramatically depending on your situation and material needed to get the job done. In addition, the time that it takes to complete this will also vary.

Sail plans are rather inexpensive if you are aiming to build a small boat. These plans allow you to see the workings of the boat design and what you need to build the boat.

Without these plans, you will not know the exact details of the design and it can cause major issues with the boat’s hull or other areas of the boat. Think of these as the backbone or instructions of the boat’s infancy before being built.

Price Per Square Foot

You should assume to pay anywhere between $300 to $600 per square foot if you are interested in building a boat. Buying a kit outright can be a good way to save time, but oftentimes these do not come with everything you need.

Instead, you should try to source as much of the materials at the best price as possible. Thinking ahead is part of the process and you might be able to score a deal at a lumber yard or hardware store for parts.

Boat Designs Matter

The design of the boat will be much different from one boat to the next, regardless if they are the same size in length. If you are pondering boats that range anywhere between 16 and 20 feet, you should factor in the shape of the hull, any rigging, and various appendages.

Prices tend to increase when there are more complexities within the designs. If you are considering a kit with more details than others, you will also have to pay more for the designs on that as well.

Kits Can Differ

It is important to understand that all kits are not going to be the same. As you gander at sailboat kits online to stitch together, you need to thoroughly look over to see if you have everything you need before buying.

It would also be at your advantage to ask the seller if any additional parts or supplies are needed. This may change your dynamic on the kit buying process and you may pass up one for another if it has everything you need. An all-inclusive kit may cost several hundred, if not thousands, of dollars more to have the convenience of everything in the bundle.

Construction Approaches

Some boat plans may require you to have certain tools to get the job done. This means special saws or planers, which the average person simply does not have.

Purchasing specialty tools might be expensive upfront and hard to find depending on what it is. Your best bet would be to check locally for others trying to sell their tools or consider a boat plan that does not require extensive tools to finish the job.

How Long Does it Take to Build a Sailboat?

An easy to build sailboat could take a while to build from scratch. Many different variances come into play that are difficult to pinpoint for everyone. But how long is that exactly and how will your experience play into this?

A fun project to sail in the wind could take you several months to well over a year depending on the boat plan and how big your boat is going to be. In addition, the materials all need to be accounted for prior to starting in the event a hardware store does not have them in stock.

Time Varies

The time that passes for simple boat designs on small sailing vessels can be done in a few weeks. This is assuming you have everything you need and work non-stop around the clock.

Certain complex situations may make the process long, such as the difficulty of working with some materials. If you are a skilled laborer, it may take you half the time compared to a novice. The amount of time it can take will vary on your availability and skill level.

Planning ahead will undoubtedly offer the most time-saving features. It also helps if you can tackle parts of the project at your own pace.

Complexity of Design

The design of the boat may make the construction process longer. For example, it may take you longer to build a catamaran compared to a similar lengthed monohull.

More complex designs might require more materials, therefore making the process a bit longer to complete. Furthermore, you will also need more experience working with difficult designs and that will affect you more as a newbie.

Be sure to manage your expectations well and do not allow yourself to become too stressed over this fun project. If you can, seek expert boat building advice from a local builder or the company you purchased sail plans through.

Quality Materials

The quality of the materials will matter significantly when building a boat and will greatly affect the time it takes to construct it. Handling fiberglass or carbon fiber might require specialty tools, while wood also demands a certain level of craftsmanship.

If you are not skilled at working with the material at hand, it might affect the quality of the build and you may have to go back to fix mistakes. This will definitely add more time to your project, because mistakes are bound to happen with your first project.

To save time, consider adding the tools and materials throughout the year or as often as your budget allows. You may want to try testing your skills on fiberglass or other materials to get a feel for how to work with it.

Daniel Wade

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Best Sailboats

Learn About Sailboats

Most Recent

Best Small Sailboat Ornaments

September 12, 2023

Best Small Sailboats With Standing Headroom

December 28, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Discover the Magic of Hydrofoil Sailboats

December 11, 2023

Best Bluewater Sailboats Under $50K

Hunter Sailboats: Are They Built for Bluewater Cruising?

August 29, 2023

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

Elizabeth O'Malley

June 15, 2022

Best Electric Outboard Motors | Life of Sailing

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands | Life of Sailing

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Great Projects

Build a small sailboat free plans.

These plans are for a small 15 foot knockabout sailboat.

I like these plans for their ease. Building a smaller boat is a lot more attainable than a cabin cruiser! And these plans get right to the specifics of building. From the plans:

ANY SAILBOAT fancier will like "Tramp," the trim, 15-ft. knockabout that's so easy to build in plywood. The first operation is to cut the stem, transom and side planks and assemble the forms.

Use casein or waterproof glue under the butt strap joining the side planks together. Forms can be made of almost any scrap material on hand. If you are a good enough mechanic, they can be dispensed with and correctly beveled frames made to their exact shape can be placed permanently in the boat. Screw-fasten the oak frame at sides and bottom on the inside of the transom. Then notch out the bottom of the frame to receive the keel batten...

The transom is placed last and must be beveled so that the side planks fit tightly against the cleats and the transom edge. Be sure to place white lead and a thin thread of cotton between planks and stem and transom prior to joining them together...

Related Plans

All Our Vintage Projects Categories

Vintage projects.

Discussion Forum

Ask questions, get answers, share stories in our discussion forum!

| | | |

index.
-->

Boat plans from Science and Mechanics and Boat Builder Handbooks. Plans for Hydroplanes, Sailboats, Inboards, Runabouts, Canoes, Kayaks and many other boats.

This is a user supported site. An online library. To contribute just send an " ".

There are a few plans that have CAD drawings that users have provided. The few cad files that are available (".dwg" and ".dxf" files) can be viewed and printed with a most cad programs. A viewing only program is available at . If you need to view them and dont have a renderer then you can get the latest version you find there. Its no longer being updated but used to work pretty good.

The ".png", ".jpg", and ".gif" files are best viewed and printed from your favorite photo editor. After you have followed the image link to the point it is no longer a link and is taking up the entire web page, Save "The Image File" on your local machine by right clicking on the big image you want to print and select "save image as".

If you dont find the boat you were looking for in this library, your local public library may have an issue of the magazine with your boat in its archives.

I had a request to save moms club, seafood recipe book, online to share with those who have had these. Well now that I have put these on here, they all want, ALL of there recipe's online. Well lets start with these first. They kind of go with boating I think. Check out the . Clams are awesome fried, in chowder, even dip's. Found this excellent reference for all things Clams. Check out

\| \|
		: : Free Boat Plans

	] \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| ] \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| \| (32) (316)

Building Skerry
Building a Scamp
Boatbuilding Links & Resources
Boatbuilding Tools

Plans for Boats, oars and paddles. Many free plans

As I was looking through my boat plan links I realized that they were scattered here and there. I decided to compile the links all in one page to make it easier to navigate.

Email me if a link is broken. I try to update everything often but the internet is a fast paced place. (and I'm not so quick), I've also included free oar and paddle plans and books with plans in them.

I offer a few plans but most of these boat designs are links. I have not built most of these and cannot endorse them. Some plans are good, others not so much.

Many plans are now available, particularly those that offer hundreds of plans for very cheap, which are reprints from old Popular Mechanics and other magazine. The building methods are somewhat dated and the plans often not very detailed. Of more concern materials such as lead paint are sometimes recommended. Do your homework before building these. Often buying a good set of plans from a recognized designer will save you time and money in the end.

The following plan links may have duplicate because they may fit in different categories. A kayak plan might also be a free stitch and glue plan. Enjoy and go build a boat.

Links to All kinds of boat plans, oars, some free plans

Miscellaneous Boat Plans many of them free. It's my largest plan page. Whenever I find a new plan I try and add it to this list.
Motorboats Everything from simple skiffs to elaborate speedboats, classic wooden boats and fishing vessels.
Dory Boat Plans Various plans some of which are free. Wide range of dory styles, usually characterized by a pointy front, relatively flat sides and toumbstone transom.
Skiff Plans By skiff I mean a simple shaped pointy boat with a wide transom. Often used as a fishing boat. Capable of planing and carrying a motor.
Strip Building Plans Often cedar strips are used. Often results in lovely rounded shapes with glorious wood finish. A favourite for canoes and kayaks but often seen in sailboats and multihulls.
Ultra-Light Boat plans Imagine building a boat that weights less than 30 pounds and even less.
Canoe and Kayak plans Many free plans included.
Tenders Selection of boats suitable as tenders, some free. Many methods of building including stitch and glue, ultralight and strip building.

Free Boat Plans

Free Skiff Plans Skiffs are fast easily built boats.
Free Canoe and Kayak Plans There are some nice free designs out there. They vary in amount of detail offered.
Free Stitch and Glue Plans Also plans that could be built using stitch and glue method.
Free Rowboat Plans
One Sheet Plans Boats can be built using only one sheet of plywood. Here are a few.

Free Canoe and Paddle Plans some links some actual plans

Free Plans for Simple Oars by Spark Geissler Nice easy to build oars.
Links to many Free Oar, kayak and Canoe Paddles. Some nice designs including traditional kayak paddles.
Free Paddle Plan From an old boy's book.

Surf Boards and Paddle Boards

Surf Boards and Paddle Board Plans

Multihulls and Proas

Multihulls including catamarans, trimarans and proas.

House Boats

I have a few free actual boat plans, some in pdf format.

These are mostly from old sources. Check before building.

Folding Boat Plan from Boy Mechanic Book Turn of the century design for a folding boat. Link to a video of someone who actually built it. It's quite good. I think the builder had to fiddle the dimensions some before it would fold properly, but it's a fun boat.
Old Plan for Plywood Tender Actual plans, seems like a nice pram dinghy.
Old Plan for Punt Actual plans, from old book. Substitute plywood for solid wood.
Old Plan for Take Apart Skiff Actual plans, in PDF format. Boat is in 3 clip-together sections.
Old Plan for folding boat in PDF format. Plywood with canvas hinges folding skiff.
Take apart Jonboat come in 3 sections and has a built in cooler.
Building a Skerry from plans
Boatbuilding Links & Resources from my Website

I try to be accurate and check my information, but mistakes happen. ALSO keep in mind that not all free boats are good designs. Some are but others are worth exactly what you pay. Also keep in mind while I'm in a preachy mood, that a good set of plans will save you lots of time and if you've paid for them you can actually often contact the designer and get help.

About Modern Wooden Boats
Tips & tricks
What’s inside a boat plan ?

Idea 21 sportboat

The development of the family of small offshore capable sailboat plans : chined hull for the highest stability, vertical lifting keel, trailerable, suitable for club racing or cruising (two interior versions) , plywood and epoxy hull with the radius chine system, sparkling performances while sailing and reasonable interiors for coastal cruising.

		DOWNLOADS
6,30 m	27,5 m2
2,50 m (trailerable)	45-26 m2
1,75 m – 0,50 m	outboard 2.3-5 HP on transom bracket
900 kg
1200 kg
1700 kg
300 kg

First boat launched : read the first impressions here

Idea 21 small sailboat plan is the latest development of my family of small plywood & epoxy sailboats plans for homebuilders : it was quite a time since i was thinking of an evolution of her smaller 19 footer sister, so i finally take the decision to publish this new plan. the goals of this plan is simple: add interior volume, simplify the work for homebuilders switching to a complete plywood & epoxy radius chine hull, enhance slightly the sparkling performances of idea 19, keeping the sailboat very balanced and suited for sailors ranging from enthusiast beginners to experienced seamen., first boat launched and several other boats in building stage make idea21 the most sparkling project on our catalogue, hull: chined hull on a small light sailboat has a simple reason to exist: it gives more stability to the sailboat when heeled, much more than a round hull similar sailboat. i managed to keep a very low wetted area of the unheeled hull, in order to achieve a good pace in light air and avoid excessive drag. stern sections are quite flat to gain speed downwind (idea 19 has been clocked with speed steadily in excess of 15 knots)., bow sections: experiences on racers showed that “knife-blade” bows may give you less resistance, but the price to pay is high in terms of buried bow sailing downwind, so i decide to provide this plan a large u-shaped section on the bow ; sails provide the sailboat plenty of power to defeat the small amount of added drag., sailplan: i have a very good starting point with idea 19, so we’re doing small adjustments and no revolutions: square top mainsail, 7/8 fractional rig , very wide single swept spreaders, no backstay, deck stepped mast with sturdy section, 110 % j jib, code zero, jennaker hoisted on swinging retractable bowsprit, and a good amount of sail area., keel and ballast: idea21 have a solid hard wood cored & unidirectional glass epoxy laminated lifting keel, with a naca optimised profile and a low resistance hydrodynamical shaped 280 kg lead bulb bolted on the keel tip; it can be made by a homebuilder, no need for professional welder; the fin area is on the low side, speed will help generating the required lift without adding too much drag. keel case is in 20 mm thickness plywood and epoxy laminated glass reinforcements, and it’s perfectly waterproof while sailing., full lifting keel version : after a request from a builder, idea 21 cruise is available in a version featuring an integral watertight keel case running form hull bottom to cabin top panels, this feature called flk (full lifting keel) will allow the boat to sail with keel partially raised or to motor with keel totally up, a good option if you sail in shallow waters frequently., cockpit: was one of the strongest point in idea19, we simply keep the same arrangement and dimensions, so we have a really huge area for the crew and a simple and sturdy building in plywood panels epoxy glued on a structure of bulkheads and stringers., interiors: here i focussed on several upgrades; i decided to split the project in two versions (so two different sets of plans, you have to specify on order), “sport cruise” or “racing” ; both versions have 4 berths, a classic v berth on bow and two quarter berth after; in the cruising version cabin is 55 cm longer, giving wider interiors, enough room for a separate toilette and more comfortable after berths ; in the racing version we have a marine toilet (there’s room for a jabsco compact one) under the bow v-berth; cabin height is 1.65 m in both versions. interiors plywood panels are detailed on plans., taking advantage form the first season of sailing, i can now say that i strongly advice the cruise version as long as you are not going to run a sailing school, thus needing extra space in the cockpit., wooden rig: starting form summer 2019 we deliver two extra drawings with the plans, both for race and cruise version, describing how to build a wooden rig suited for this boat. keep your budget low at the price of a small extra weight , how to build the boat: we chose the plywood & epoxy resin “radius chine” system, as for petrel 28 and hirundo 750, so the hull planking is in okume marine grade plywood ; planking the hull is quite fast , and the internal structure of the boat is made by plywood bulkheads, floors and solid wood longitudinal stringers, all glued with epoxy and strengthened with epoxy laminated glass tape, assembled on a cheap wood scaffold, keeping the hull light, sturdy and quite easy to build for homebuilders ; the goal is to keep the total weight of the 19 footer, raising the ballast fraction of the sailboat at the same time. here are a couple of pictures of the first planked hull perfectly showing the radius chine planking system.

a HUGE Thanks to Nils Theurer ([email protected]) for the awesome pictures taken during the first sea trials

Plans availability: Plans are available in italian and english. Plans are available in imperial units upon request (send me a mail before purchase).

BoatNews.com

Free model boat plans: the MiniX, an easy-to-build radio-controlled sailboat

We set ourselves a challenge: to make a sailing model. In the end, after hours of reflection and work, we discovered that we took as much pleasure in designing and building as we did sailing our yachts. Here is the description of our project and the plans to download. Another article follows with the steps of the realization.

An easy-to-build, eye-catching, high-performance sailboat

Who hasn't dreamed of a little wooden sailboat with a beautiful canvas cover? The idea for this project is a child's dream.

Sailing on a regular basis in "scale 1", we had the idea of having fun by sailing two boats to race in our "spare time". The boats had to meet the following specifications:

Easy to transport. Measuring just 50 cm, our MiniX doesn't take up much space in a trunk. However, the keel and mast can be dismantled. If need be, the MiniX can even be included in our vacation luggage.
Able to be thrown into the water "out the back of the car" without complicated implementation.
No investment that would jeopardize our homes. As this is not a one-off activity, we didn't want to invest in expensive radio controls (our boat's biggest expense). A basic radio control kit is powerful enough to handle "small" sail surfaces.
Resembling a sailboat at best, hence the presence of the deckhouse and cockpit. These two elements give a sense of scale without resorting to model-building. Above all, a sailboat must be beautiful. Don't we also sail for the pleasure of our eyes?

Modern construction

To keep it light (ready to sail , the MiniX weighs just 800 g), the hull is an extruded polystyrene/epoxy resin sandwich (laminated Depron). While this process is not impact-resistant (though...), the structure and sandwich make it very rigid. Together with the deck, the whole thing forms a kind of egg whose strength is astonishing. It's impossible to apply the slightest twist to the hull, despite its lightness (the bare hull weighs just 260 g).

Our yacht has a chine hull. But this doesn't detract from the look, as the chines are largely rounded and, combined with the straight bow, give the illusion of a beautifully shaped hull. When sailing close-hauled, the stern of the MiniX lifts off, limiting drag in the water.

Technical data

Overall length (with rudder): 56 cm
Hull length: 51 cm
Width: 17.6 cm
Draft: 25 cm (but this may change...)
Air draft: 92 cm (mast: 86 cm)
Operating weight (with sails, servos, batteries and keel ): 800 g
Bare hull weight (without servos and keel ): 260 g
Weight of ballast: 240 g (but may vary according to draught...)
Wing surfaces: Jib= 6 dm² GV= 15 dm²

MiniX drawings

You can download the plans. They're simple and precise. We made our two boats by printing them on a basic A4 printer. Then we simply assembled the sheets by superimposing them and gluing them (repositionable spray glue) to Depron. A sharp cutter is all it takes to build the MiniX with precision.

Just one thing: we've put a lot of heart and soul into building this yacht. We'd be delighted if our experience could be put to good use. Don't hesitate, help yourself! But be so kind as to let us know with a little comment. We'd love to hear from you.

Here you can download the first part of the plan in A4 PDF format .

With this you already have the complete boat. Based on the construction photos, there's not much missing to build the whole MiniX. But since we're taking care of you, here are the sail plans too:

Mainsail plan

Real sails with webs for their shape.

The construction budget

MiniX doesn't have to be expensive. We've always tried to find a way of "diverting" objects to make our project a reality. So it's hard to come up with an exact budget. It will be higher for someone who doesn't even own the basic tools , and much lower for someone who does it in the back of his already well-stocked workshop.

6 mm Depron sheet (2 sheets, 125 x 60 cm)
Epoxy resin + fillers
Glass fabric
4 mm plywood (a small piece for the keel , keel shaft and rudder)
Carbon tubes (6 mm for the mast and 4 mm for the booms)
GV carbon batten (1/10 mm in kite stores)
Remote control servos kit ( first price: ?60)
Florist paper for the sails (a good opportunity to give pleasure...)
Blenderm (surgical tape), available from chemists, to join the sails. Cut the 20 mm roll in half to double its length.

In the end, we estimate a maximum budget of ?120 per boat (calculated in 2021).

Because a construction project like MiniX is above all a team project... And in a team it's good to be complementary.

The MiniX project went through a long phase of gestation - reflection - intellectualization - drawings - exchanges - helping hands to get to this stage. Today, it's sailing thanks to this pooling of skills. We hope you'll enjoy this project as much as we have. And we look forward to hearing from you in the comments or on the forum. Enjoy!

Free model boat plans: the MiniX, an easy-to-build radio-controlled sailboat

LIST of WOODEN BOAT PLANS – By Michael Storer

Plywood boat plans and wooden canoe plans. sailing dinghy . power . row . paddle . overnight, a boat building course in a book.

Click on an image for more information about our inexpensive, highly detailed boat plans and wooden canoe plans

Viola 14 Sailing Canoe Boat Plan

A sailing canoe to make dinghy sailors happy – 75lbs and for a simple boat, beautiful beyond belief – visit page.

Viola 14 Sailing Canoe is fun and exciting. But easier than a sailing dinghy to transport and store.

Canoe performance and Dinghy stability. 14ft – 75 pounds (34kg)

Viola is extremely stable allowing the crew to stand up and step and unstep the lug rig mast while on the water. Try that in a symmetric paddling canoe hullform! If righted correctly she is almost dry after capsize.

Three Sailing rigs with two piece masts 4.7 and 6.0sqm full batten rigs. 6.3m balance lug with three reefs for distance sailing. 75lb hull. Four sheets 4mm plywood.

More about the Viola 14 Sailing Canoe Plan here

Kits For Viola 14 Canoe Europe – Viola 14 Sailing Canoe Precut Plywood and Timber Kits Americas – Viola 14 Saling Canoe Precut Plywood and Timber Kits

16ft Kombi Sail and Paddle Canoe Plan

A 50/50 Sail and Paddle Canoe for one or two with more stabililty for sailing – visit page

The Kombi Canoe is a development of our recent sailing canoes to bring paddling ability up equal to the sailing ability.

Great for families as it can be used as a pure paddling canoe, but also sail well with one or two adults aboard.

More about the Kombi Sail and Paddle Canoe here.

NEW Plan – Mini Outriggers for Adding stability to sailing canoes and small dinghies

The Mini Outriggers are to add stability to a sailing canoe or small dinghy and aid stability to reduce the risk of capsize on other relatively slender boats.

They are set above the water to allow a sailing canoe or narrow dinghy to be sailed normally .

More about the Mini Outriggers here.

Taal Stand Up Paddleboard in Plywood

Both speed and stability at the same time.

A beautiful plywood Stand Up Paddleboard designed for distance paddling.

The user feels the stability, the water thinks it is a low drag pintail. 12ft

We created a board that hits the numbers for a good canoe or rowboat. Less wetted surface with a stable midsection and excellent weight carrying.

12ft and Stable for beginners but with the low drag of a kayak/pintail type hull (see the stern photos).

More about the Taal Touring Stand Up Paddleboard Plan here

Goat Island Skiff Sail Boat Plan

Simple, modern performance and famous worldwide.

Justifiably famous.

Simple to build but light, fast, pretty. Fast with 1 to 4 adults

Rows and Motors and will sail rings around other character boats. 15.8ft

More information about the Goat Island Skiff Plan Facebook Group for asking questions about the Goat Island Skiff

Quick Canoe 155 – build in 2 weekends

Very simple plywood canoe that handles well and looks right.

Quick DIY wooden canoe that works better than most flat-bottomed canoes and many fibreglass ones.

Even looks good on the beach. 15.5ft

First one took the builder 4 1/2 hours to get on the water – but most take 2 weekends. Half the weight of many fibreglass canoes. Lighter than most plastic. 55lbs from big store plywood. Another took 5 1/2 hours .

It has been designed to be as easy to build as possible while keeping most of the qualities of a nice paddling wooden canoe.

In particular the ability to track – excellent first boat plan. Click here for a comparison between our fast and our classic paddling canoe plans

More Information about the plywood Quick Canoe Plan

Eureka Canoe – Classic Plywood Canoe Plan

Light and lovely to paddle. simple plywood boat plan.

Light on the land, Prettiest Plywood or wooden Canoes anywhere. 15.5ft

Excellent distance touring boats.

15’6″, simple construction for a wooden canoe. 32 – 45lbs (15 to 20kg)

Click here for a comparison between our paddling canoe plans.

Click here for more information about the Eureka Plywood Canoe

Quick Canoe Electric Cargo Canoe Plan

Wooden cargo canoe for electric trolling motor 34lbs thrust.

5 to 6mph using a 34lb thrust Minn Kota or other electric trolling motors. DIY plywood canoe for fishing and roof racking.

Keeps the simplicity and low materials cost of the Quick Canoe Family. 15.5ft

Cartop transport. Very detailed Wooden Canoe Plans.

Click here for more information about the Plywood Quick Canoe Electric

Oz Goose Light Family and Club Sail Boat Plan

Low-cost family sailing dinghy, regattas and club training and learn to sail.

The Oz Goose is a small boat that is super easy to build.

Cruising or teaching with three adults or excellent club racing performance sailing with 1 or 2 in the boat. 12ft

The famous line is we can build 10 of these in the Philippines for the price of importing a single Laser sailboat. Boat speeds are very matched for excellent tactical racing when not heading off for a family picnic with two adults and a bunch of kids aboard

For training, the goose will carry an instructor and two adults to sail with good sensitivity and speed. In stronger winds, we commonly see downwind speeds of 10 to 13knots and sometimes much more.

Also, visit the Oz Goose Group on Facebook More information about the Plywood Oz Goose – see the website

“BETH” Sailing Canoe – Elegant plywood boat plan

Simple, brilliant performance – one person cartop – sailing canoe portability.

A touch of the 1870s but fast about as much fun as is possible on a plywood boat.

Yawl Rig with speed – a wooden canoe that can scare the Lasers at your local club .

Racing dinghy experience recommended!

A small boat for amateur boat building that is light enough for one person to roofrack 70lbs plywood canoe hull. Sailing Canoe boat plan

Click here for more about the plywood BETH Sailing Canoe Plan

Drop-in sail Rig Plan for Canoes and Kayaks

Convert a canoe or dinghy into a serious sailboat.

Convert most Kayaks or Canoes into an INSTANT SAILBOAT.

Everything removes as one unit except for the mast step

Also fits some rowing dinghies that are small or narrow.

Very cheap beginners plan.

Read more about the Drop-In Sailing Rig Boat Plan

Drop in Outrigger Canoe conversion Plan

Convert canoe, kayak or dinghy to a fast sailboat trimaran with amas..

Create a paddle or sailing outrigger canoe from a fibreglass or wooden Canoe or Kayak.

Even an elderly Grumman!

Convert your old canoe into an awesome sailing machine or fishing or diving platform.

Each component is under 10 pounds and everything removes cleanly from the boat apart from 4 small fittings and a mast step.

These Amas and crossbeams work for fibreglass and wooden canoes and dinghies, Fibreglass, Aluminium and some plastic canoes.

Performance sailing (see the video on the plan page ) or as a stable fishing platform or to make a super quick sailing multihull.

If you buy the plywood boat plan for the outriggers there is a free supplement available to set it up for sailing. Very cheap plan for a big boost in performance.

Find out how to convert your canoe, kayak or dinghy to a fast sailing outrigger canoe

Handy Punt – simple fishing punt Boat plan

Light cartop load, simple to build and stable – ideal first plywood boat plan.

Outboard motored Punts are the simplest plywood boats.

Good performance, easy construction, stable fishing platforms.

And lightweight for cartopping on roof racks.

An easy first boat plan for first-time boatbuilders.

6 to 8hp – 10 in some regions

Click here to find out more Outboard Punt Boat Plan

Russki Wave Ski, Surf Ski, Sit Down Paddleboard Boat Plan

Easy to build sit down paddleboard from two sheets ply.

Simple plywood waveski or paddleboard from two sheets of plywood.

Paint it and keep it on the car roof ready for use after work.

Small light boats usually are used more frequently than complicated and expensive boats.

Find out more about the Russki Plywood Wave Ski Plan

15 1/2 ft Storer Rowing Skiff Plan

Easy pretty plywood rowing skiff plan for oar.

Simple lightweight rowing skiff for one person and maybe a passenger based on the Goat Island Skiff.

Or Adult and a couple of kids.

Pretty and quick rowing boat on the water.

Simple lightweight rowing skiff for one person and maybe a passenger or a couple of kids. Based on the Goat Island Skiff. I used to get enquiries about using the Goat Island Skiff sailboat hull for rowing. It does row well but blows around too much.

This is much, much better. Pretty and quick rowing boat on the water.

Find out more about the plywood Rowboat Plan

Dayboat/Launches Boat Plan Bundle 23 plus 27ft (7/8.4m) Venezia

Boat plans for two simple prefabricated cruisers for low power outboard in one package – 23 and 27ft.

Picnic boat, party boat, river-cruiser, camp aboard, mini home-away-from-home.

Cuts through river and lake chop with zero bouncing and pitching.

Pack includes 23 and 27ft Dayboat versions in one plan pack includes Venezia below.

Simple plywood construction. 10 or 15hp 4-stroke for 8 to 10 knots. Venezia and Dayboat Launch Boat Plan Package

More about the 23ft Plywood Dayboat/Launch Boat Plan

“Venezia” 27ft trailerable canal boat

Stretched version of 23ft – both included in the plan above.

An 8.2m (27ft) boat for gentle cruising in rivers and canals.

Great appearance, sleeping accom., separate toilet – your layout.

10 to 15hp 4-stroke. 2 wooden cruising motor boat plans for the price of one – Venezia and Dayboat Launch Boat Plan Package

Read more about the 27ft Venezia cruiser canal boat plan

TC35 Riverboat – Prefab, Economical Liveaboard for Two

Minimal liveaboard plywood boat 35ft.

Very economical, near wakeless cruising motorboat.

Light on the gas and light on building materials.

Revised wooden boat plan for an extremely economical, efficient low horsepower riverboat.

35ft. 1 x 15hp or 2 x 10/15hp. Simple Prefab Plywood Construction.

Find out more about the TC35 River Cruiser Plywood boat plan.

OZ RACER – 8ft Sailing Dinghies.

Smaller versions of the 12ft oz goose sailing dinghy – 8ft for easier storage..

12ft Oz Goose for Capacity and Performance

Same easy construction
Same Sail and Foils
Much higher performance
Much larger capacity

OzRacer RV 8ft – General purpose version

OzRacer RV is the same small boat hull but with more space in the cockpit and is a slightly simpler build.

4 sheets plywood.

These Boat plans are a modern boatbuilding course in a book. Capacity 1 adult and one child or maybe 2 adults

Find out more about the OzRacer RV

OZ RACER Mk2 8ft – Race Version

OzRacer Mk 2 has a centreboard for more performance but a bit less room for extra crew.

Three sheets plywood. Simple Plywood Boat Plans. Capacity 1 adult and one child or maybe 2 adults

Find out more

Free plans Oars and Single Paddle & Double paddles.

Simplified paddles and oars based on classic designs – free plan.

Free Plans for Wooden Oars
Single Paddles
Double Paddles.

I didn’t want to charge extra for nice paddles to go with our nice wooden Canoe plans

Download Free Oar and Paddle Plans from this page.

Tips and Tricks for Boatbuilding, Woodwork, Use of epoxy.

CLICK HERE for many helpful articles about the selection of materials, boatbuilding and boat repair techniques. All to help home boatbuilders.

The Master list of Articles we have written to explain and help out home boatbuilders

Blog Articles about a whole range of design, building, sailing technique articles.

57 thoughts on “LIST of WOODEN BOAT PLANS – By Michael Storer”

Dear Michael Storer, After purchasing your design of the Viola 14 I am in the process of building now and looking for the sail plan for the 6.3m lugger sail which is not in the building description. Can I find the sail plan somewhere on the website or can I get it in another way? Thanks in advance and best regards, René

For these sorts of questions it is best to use the email on the cover of the plan set or the facebook group. https://www.facebook.com/groups/storerboatplans/

But having seen this now I will send this to you.

Best Regards Michael.

Hello Michael,

it is possibel to get a Plan from your Goat island Skiff but 50% bigger and with a standard Rigg with Fock and main sail ?

Best regards Volker

No, I am a afraid it isn’t possible. It changes so many things that it becomes a new design. I choose new designs on the basis of how many I feel I’m likely to sell. I am interested in designing a bigger boat but it won’t be for some time. Maybe years. But there are other excellent designs that may suit your needs. Have a look at B & B designs. Similar performance type but already bigger and with and without a cabin.

Best Regards

Hello,, Michael, I am interested in building a hull like your Handy Punt, but at a length of 14 to 16 feet and a maximum width of 5’11”. (48-inch width would be adequate.) These dimensions are dictated by the covered slip where the boat would live. I will customize the interior for fishing in a 100-acre lake that does not allow gasoline motors. It can be lifted by an electric hoist for storage. Power would be a Minn Kota bow-mounted trolling motor with 80 pound thrust. It would be laid out for two-person fishing. Pilot would sit in the front to steer motor and consult bow-mounted sonar. Passenger would be in rear on chair or bench. It would need two 12-volt marine batteries. Could this work?

Increasing the length doesn’t really create any significant problems if another bulkhead is put in somewhere.

But increasing the beam creates all sorts of structural loads not anticipated in the original. It would no longer be a Handy Punt, but an original design from you. That’s not necessarily a bad thing – but there are risks involved.

Cheers Michael

interested in building a handy punt catamaran using an enlarged ozgoose plan 16 x 4 making the air chambers 2 x16 for the pontoons for a outboard motor of fairly low hp I am thinking 20 hp

It is possible to modify plans.

Yours is either the glory or the recriminations – or possibly both :)

Hi Michael Do you have any 17ft plans for coastal camping and cruising? David Australia.

I don’t.

I would suggest looking at John Welsford, B and B yachts and Iain Oughtred designs.

All good designers of very different styles of boats.

hello Michael,

would you be the man formerly behind Q-Craft ? If so, can I get your advice regarding the 3-person canoe model. There’s a used one for sale nearby and our buying decision based more on price than anything else. Being fibreglass, weight’s the prob but I’ve owned the same Canadian type many years ago so know what we’re in for at least. Solely calm waters intended for our paddling Appreciate your feedback if appropriate

I’m afraid I have never had any connection with Q-craft.

Hey Michael,

I recently bought your GIS plans, and then I found out that you may have a smaller version in the works. Will that be available any time soon?

Hi Rick, No, the timeframe is quite long term to get another plan fully documented. Probably 100 pages to write, lots of illustrations, drawings etc

God day Michael ! I am following the VUELTA (cycling Tour of Spain) and I enjoyed for 10 mn ago seing the young Australian Michael Storer winning the very hard “etape” (day competition). He had to climb the last mountain with two others guys 100 yards back and the suspense was terrible until the line, but this Aussie was a tiger today. Conclusion : two Michael Storer on top of the wave in Australia now ! (I enjoy your boats and I love Australia – living in Cottesloe, Perth, in the last century).

Thankyou Yves!

I don’t actually have many namesakes. For years the only Storers in the Sydney phone book were my family and my Aunt.

But other Storers have clearly been more (re)productive!

Best Regards and thankyou for the kind words.

Hi Michael I’m finally (FINALLY!!) building the Eureka Canoe. I purchased the plans way back – this is the set from 2006 (!) – but I wanted to check the temporary spreader dims for the higher volume boat. In the plans I have, it’s middle spreader = 857mm, and 2 end spreaders = 646mm. What are the higher volume dims?

Hi Richard … Send you an updated copy. Ah … was good fun living in Adelaide!

Hello, I have decided that my next boat to build will be a Shanty Houseboat as a retirement project, some place to live and be near fish, ya know? But, my journey in boat building started back somewhere in 2005 in Balad, Iraq. I was deployed at the time and was having severe anxiety so I did some meditation to calmer, more serene places and times, which eventually led me to a particularly fine memory of about 10 yrs old. Then, I was the middle child of 3 to a single mother on welfare, which did not afford many options on luxury or entertainment. I am sure you’ve heard the tale a thousand times already… I had a friend, named Eddie Dean, who’s Mother had a boyfriend who wanted to take her sailing. Being a single mother also, she couldn’t leave the kid behind, so they took me as a playmate. I had never been on a “real” boat in my life up until that time (a couple of ‘canoes’ at Six Flags, maybe.) I cannot even tell you the color at this point. But we went sailing, night sailing also, and it was a hidden, joyous memory for me! Fast forward to the war, and I find myself struggling for sanity in an insane place. I find that gem and I latch onto it like nothing else, this was my ‘safe’ place! I order “Sailing for Dummies” from Amazon, Sailor-talk Flashcards, and a book on knot-tying. I am determined, I am going SAILING again!!! Yet, I am in a desert and don’t have a boat… So, when I rotated back to the World, I do research and find the PDR, easy enough. Then I find the OZ version of that boat, which is the FIRST boat I built! Before this, the ONLY thing I had ever built out of wood, was a lopsided bookshelf in 8th Grade woodshop. A truly tragic abuse of wood, in hindsight. Your plans were straight forward, easily read and thorough. It was an immense pleasure to craft something from nothing. I took a month on it because I did not understand some terminology. More research… Once she was built and rigged, I still didn’t have a name. I floated her on the south marina of Willard Bay, Utah and dubbed her “OMGIF” (Oh My God, It Floats!) Afterwards, I applied all the book learning and taught myself how to sail. It wasn’t all peaches and cream, I had underbuilt some things and over estimated my skill A LOT! But, it was a GREAT beginner boat! I even taught all the “feral and orphan” children (this is a generic term for ALL kids that are not mine) around the neighborhood, those that were willing to learn, how to sail. I eventually gifted the boat to the prodigy for his 10th birthday. Since that first incursion into boat building, I have built 3 more: 2 day-sailers and a sloop, cabin cruiser, which I now currently own NONE! My ex-wife would let me build them, but not sail them. She is NOT an issue anymore

So, to make a short story long, I have been searching for a tender- type fishing platform for the Shanty I will build. I am quite excited about the prospect of a 12′ OZ sailer to fill that function, and I cannot wait to start building!

You do good work Sir, I thank you for it!

PS. Not that it really matters, but I posted on the PDR website 2 records the year I built my OMGIF: Highest Elevation and Fastest Speed. Was quite proud until I realized that I was the ONLY person that posted that year. So, to cure my depression, I also posted a PDR World Record for the Pinkest Boat! (mine was green…)

That is all excellent!

Congratulations on your records!

We have a great and active Oz Goose group on Facebook – if you use facebook. https://web.facebook.com/groups/opengoose/

Hugely useful.

Best Regards and Good Luck with the next project

Hi Gary, Wayne, Michael – I am also interested in outriggers+Kombi. has anyone pursued this idea? If one were to go down this route, are there any design considerations that need to be in mind from the beginning? Is the only real change to the Kombi increasing the mast diameter to 60mm? With the increased stability of the outriggers, is there any merit to considering the larger rig from the Viola instead of the standard Kombi rig? Or would this throw other things out of balance? Thanks, Colin

There are other ways to go with outriggers.

The idea from Solway Dory of smaller hulls gives a lot more reserve stability – plus they can be kept out of the water most of the time for a negligible effect on performance.

the mast would not need to be changed over either.

Look up the Solway Dory Outriggers on Google and see what you think. This is also a better topic for email.

hi Mik Following Garys query about outriggers for Kombi and/or Viola. I have been thinking for a while about an rooftoppable allrounder for our extended road/camping trips in the campervan. So all in protected water, two septigenerians with one “boaty” and one a “tourist.. Single or tandem paddling (rivers estuaries and such) Sailing (safe not high performance) Fishing.(again safe platform) Of course such a wish list threatens to result in something that doesnt do anything very well. When Viola appeared I thought this could be it? But a bit wide for paddling, a bit flighty and a bit heavy. The along came Kombi! And I already have your drop in outrigger plans…Perfect! Could you perhaps suggest a layout for a Kombi Tri including any hull mounting reinforcement. As we age needs change and I am going to jury rig a couple of amas to the GIS this summer as a proof of concept experiment. I hope thats not too “rude”. The Kombi Tri I would build as a package , concept already proved. Thanks Wayne Fremantle

The Kombi is the boat for this use pattern. Mast diameter will have to go up to 60mm to handle the greater stability from the outriggers.

I would suggest setting up two spreader bars set the same distance apart as the outrigger crossbeams with the mounting points for the outrigger tie downs just behind the spreader bars.

For hull mounting reinforcement for the crossbeam tie downs a piece of ply at each point 50 wide by 75 to make a pad for through bolts and a “saddle” or “deck eye” using 3/16″ Bolts (or 5mm metric).

I think it would be quite a satisfactory boat. I would definitely carry paddles as I suspect the tacking technique will be like a roll tack for the standard Kombi so it will spin fast. With the outriggers it may be a bit sluggish … or maybe it will be fine. Also there is a free supplement written for buyers of the outrigger plan to alter the crossbeam curve to match canoes with lower freeboard. That would match the Kombi too.

Mr.Storer, I am thinking about combining your drop in outriggers with either the new Combi or the Viola sailing canoe. Has it been done? Your thoughts? Thanks, Gary Moore

Hi Gary, It will put a lot more load on the hull because of the large increase in stability.

It might be OK. The mast diameters would probably need a slight increase.

Hi I’m interested in the possibilities of cruising in a Goose and sleeping under a boat tent, for which the rectangular hull would be very well suited. Would it be possible to move the daggerboard case to the side – even against the buoyancy tank, perhaps – and narrow the bottom of the frame so it doesn’t dig in to your legs, in the interests of comfortable sleeping? Thanks.

There are some options.

If you have facebook, Thomas Newton made some changes that seem to have worked out well removing the need for the centrecase bulkhead and associated seat.

https://www.facebook.com/groups/1622720037971725/search?q=thomas newton

Hi, Michael !

I am interested to learn how many plywood sheets go in 27ft Venezia and 35ft TC35 builds. And also the TC35 resulting hull weight estimate. Can you share on that?

Kind regards, Aleksei

Hi Aleksei,

Here are the plywood quantities.

12mm x 2 9mm x 57 6mm x 4 4mm x 1

– there will be some variation here as the interior layout can be changed substantially by each builder. 12mm x 1 9mm x 20 6mm x 28 4mm x 3

Best wishes Michael.

Dear Michael,

I wish to build a Mundoo electric boat for european canals, but I can’t find the plans. Is it available? Thanks in advance,

Pal Horvath

You need to contact DuckFlat Wooden Boats in Adelaide Australia.

Their website is duckflatwoodenboats dot com (change the dot to a . and remove the spaces)

I was simply employed as a draftsman for that project. It is not one of my designs.

Thanks for the reply Michael.

I’m actually one step ahead and already had a good look over your pages of sailing tips! Really good stuff that simplifies everything considerably, especially in regards to point of sail.

The reason I chose the RV was purely for space reasons. I figure that if I ever get to a point where I’m longing for the extra size of the goose, I can always sell the RV and build a goose. I’ll never turn down the chance to build something.

Another question I had was in regards to whether the RV is suitable for roof rack transportation? I couldn’t find any info on the weight of the RV and whether this would be a viable option. Not having to buy a trailer would also cut down on costs :)

No problem at all with the principle of cartopping the OzRacer (or the Goose).

It can be tricky to find roof racks for some modern cars that can handle even the 70 odd pounds of the OzRacer RV hull. But if you can do that, then no problem.

Hi Michael,

I’ve never sailed before, however i’ve recently taken an interest in sailing after coming across various youtube videos on boatbuilding. I then went down the rabbit hole and started digesting countless books, researched terminology and watched demonstrational videos. However, I obviously don’t have the practical experience.

I’m particularly interested in the Oz Racer RV, mainly due to the simplicity of the build, but also because I can easily store and transport the boat. This also seems like a great beginner boat.

My big question however is would you recommend I take sailing lessons before building and sailing the RV? I don’t have a lot of money, so i’m in a bit of a dilemma about whether I spend money on learning to sail or building the boat and teaching myself to sail through research and practice alone.

Thanks! Drew

Sailing lessons don’t hurt at all.

But I would also have a careful look through the basics of my online lessons as they are closer to the state of the art than many sailing schools.

There has started to be large difference between what is taught and what the best sailors are using.

The importance is that the methods of the best sailors actually make sailing easier and make it easier to extend a beginner/intermediate sailor into the stronger wind ranges.

Many courses have moved with the times. But many have not.

Also, have you considered the 12ft Oz Goose. http://opengoose.com/plans/oz-goose-2016-plan-now-available-from-our-agents/

The biggest reason for choosing the shorter OzRacer 8ft is the storage after building. The cost is only a little more because the sail and everything above the decks and the fittings etc are all identical. Building difficulty and time is identical too – about an hour different actually)

Hi Michael, Thanks for your prompt reply. I replied yesterday but had issues with my browser. Anyways a putt putt boat is fine and the ability to trailer the boat is paramount. Getting down around southern moreton bay or the Noosa river, lake Cootharaba. Do you know of any builds in my neck of the woods, sunshine coast. Kindest Regards Tony

Hi Anthony,

There are/were two in South Australia on the Murray River and lakes and one in NSW on the Hawkesbury River .

But none in Queensland as of yet.

Hi Michael, Would your Dayboat come launch Venezia handle Moreton Bay. That is the water from say inner Bribie Island through the Moreton Bay Islands to Runaway Bay?

Kind Regards Tony

With the high thrust 10hp Yamaha it has substantial grunt. But despite the cabin you really need to think about it in terms of being like the old open Putt Putts.

There would be conditions that would be unwise to go out in, but plenty of conditions and parts of the bay that would be available as they are quite protected.

It would start to get tricky heading up to the North part of the Bay parallel with Moreton Island with one of the strong North Easters. But down toward the South you would just pick the location relative to the water conditions on the same day.

Best wishes Michael

hi Michael .way back in 1979. I bought plans for optimus maximus from you. I got to the frame complete stage, then a friend took over construction. as I moved to australia, He and his 3 boys finished and sailed it Often beating my brother and his sons in their bought sail boat. and had a lot of fun in the process

I think Optimus Maximus was designed by my friend John Welsford.

I will send his contact details to your email.

Best wishes. MIK

Hi, so it’s me, my wife (who is not a huge fan of sailing), and our 3.5 yr old son.. I’m trying to figure if I should build a eureka canoe for our family outings, and then the amas and sail rig for me to sail .. or.. go for the Viola 14 and hope we can all fit for short outings on lakes and ponds.. could we all fit for a paddle in the Viola? Also, how does sailing performance compare with Eureka and amas, vs Viola? With this crazy pandemic, seems like a good time to build a boat out in the carport!

The Viola will be OK while your son is really small. I designed it around being optimal for one adult. But I left enough margin for decent sailing performance with two adults providing they are not too large. Maybe it tops out at around 350 pounds or a bit more. With that weight it won’t be a great paddling boat but would be fine for messing around in a bay or a couple of miles in good weather with that weight. One up the Viola paddles pretty well, but it not optimum so will drop behind a proper paddling boat.

The Eureka or Quick Canoe would have a much better ability to travel as a paddling boat with the family. If adding the drop in outriggers it makes sense to leave out the central spreader on these canoes and put two spreaders at the same distance apart as the crossbeams of the drop in rig but a couple of inches forward of the crossbeam locations.

As far as performance. The Eureka with outriggers will have a significant and sole advantage when reaching. But upwind and running the Viola will have significant advantages as it is set up like a racing dinghy.

With the outriggers a 60 to 70sf sail seems to be about right. There is one in the free supplement for the buyers of the outrigger plan but we also make one at our sister business Really Simple Sails

The thing with the drop in outrigger setup is that not to fixate on pointing high. Get heaps of speed and then point up without losing the speed. If light winds sit to heel to leeward so the leeward hull is well immersed. Or make a leeboard for the eureka.

Hi Michael, Thank you so much for all the information! The Eureka with outriggers and sailing setup seems like the right way to go I think, especially fur versatility, plus allowing more people aboard comfortably .. One more question.. what type of sail setup do you recommend for the Eureka in the 60 to 70sf range? I’ve seen bermuda rigs and gunter rigs on this type of canoe and outrigger arrangement .. I couldn’t find the specific sail on the sail makers website.. just trying to cost out this option to see if I can afford to add the sail .. thank you! Hope you are well RP

A basic sail is part of the free supplement available to purchasers of the outrigger plan. It provides a mast support built into the front crossbeam a flatter crossbeam curve to suit the Eureka and other boats and dimensions of a homemade lateen sail to be made of polytarp, or even regular sailcloth.

Our partner business Really Simple Sails does a 70sf lug sail. However we are stuck down with quarantine which I think will add a month

to the normal 10 week timeline at this time of year. In Northern hemisphere winter it goes down to 4 weeks. That sail is USD392 at this point April 2020

Maybe that will fit in with your timeline unless you are a very fast builder.

Hi Michael, I’ve got a Laser Radial sail mast and boom setup, and I’m wondering if you thought this could work well on the Eureka canoe with outriggers, with plans on building a leeboard setup. Also wondering if I should go with the larger volume and wider Eureka. Would this sail better with the outriggers? Harder to paddle? Thanks! RP

It will be a bit big as the wind gets stronger but sparkling performance in up to 12knots of breeze. Might be exciting by the time the wind is at 15 and hard to sail in much more than that.

Could trial it with the full rig and then get a local sailmaker to cut some sail off the bottom if it is too frisky and cut a similar length off the bottom of the mast.

Another way, though not very good upwind would be to wrap the sail around the mast a few times when the wind gets up. Though the sail shape will become a big baggy for going upwind well.

There is also a supplement for the Eureka and other canoes as the freeboard can be a bit low for the drop in outriggers. I provide a drawing on request for making a mod and it also includes how to build the upper mast support into the front crossbeam.

Hi Michael, Sorry just one more question about Eureka (or I guess all of your plans in general) Do you mail a full size printed pattern to trace the cuts from? If not how do you transfer the lines to a larger scale from the manual to plywood? Thanks! RP

The plan itself is more like an instruction book for boatbuilding techniques to build the particular boat. Do the steps one by one and you will have the boat.

The method for marking out is super accurate and has a failsafe.

Basically you draw straight lines across the narrow width of the ply sheets at a set interval – dotted vertical lines in drawing below. 300mm apart. Blue is the plywood. Green is the curve of the panel. The dimensions are purple.

Then put the end of the tape on the edge of the plywood and measure along each dotted line (it will be a solid line on the ply). Put a mark at the distances from the edge shown in the plan. After marking the points on the first line vertical line, do the same for the second line and so on to make a series of dots in a curve.

Finally put a thin nail in each of the measured points and use the piece of timber from the plan list as a batten and a pencil to “Join the dots” or nails in this case to make each curve.

If there is an error it will stand out either when you stand at the end of the sheets and look along the line, or the batten will tell you the point is out of place.

If the point is out of place it is very likely a misread or a mismeasure as most of my plans have been corrected over time. But if it isn’t then you can contact me and see if I made a mistake. The CAD plans on the computer are super accurate, but sometimes a dimension arrow can be a little off.

with the article , images of the trimaran canoe – what is the canoe design. Is it a Eureka . If i wanted to build a trimaran canoe, what centre hull design would you suggest?

There are many centre hulls that are suitable. Many canoes as long as you can attach the strong points for the crossbeam lash down points. So almost any variation of wood, fibreglass or aluminium. Plastic canoes may be difficult but some claim great successes with the WEST system G-flex epoxy.

The Eureka or either the Paddling version of the Quick Canoe or the Electric version of the Quick Canoe would all be suitable. s

Good Day- i would like to chat to Michael about some design work. Is there any direct contact info for him many thanks wayne

For which type of waters(salt or fresh) was the Gooze designed? This never occurred to me until someone told me that I could navigate north on the “Rio Grande de Loiza” river and exit out into the sea, turn right, after some time I would see the exit of “Rio Espiritu Santo ” river and turn right again to go south on that river which heads inland or vice a versa (depending on wind directions on that time of the day).

Hi LAlverio,

The Oz Goose can be out sailing any time that other sailing dinghies are out. It can go conditions that are a bit rougher than many conventional dinghies will not handle well.

The goose is very stable and that stability gives it a lot of power. Also if you do capsize the Goose comes back up with no water inside.

This article about sailing in stronger winds and rough water from the Oz Goose Website may be useful for background.

If you mean the Ooze Gooze, the cabin version by Perttu Korhonen it has less capability than the Oz Goose in rough water.

Best Wishes Michael

Hello sir, I am in the process of converting my 12′ wood sailing dinghy to the Oz Goose balanced lug sail. I have purchased from Duckworks the sail and hardware kit and now I wish to build the wood mast, boom and yard. Can you tell me where I might locate and/or purchase the plans for these alone as I don’t need the entire boat plans, just the wood spars. Thank you

I have provided basic information on our Really Simple Sails website for each of the five stock sails we sell through Duckworks. https://reallysimplesails.com/rss-stock-lug-sails-other-boats/

It lists the spar lengths and cross sections in timber for each of our stock sails. It also provides guidelines for Aluminium or timber spars.

If you need details on how to actually make the parts (and a lot more including accurate foils) the Oz Goose plan is USD40. A boatbuilding course in a book.

Best Regards Michael

MarshallBrain.com

Build your own boat of almost any shape and size using free plans.

If you live anywhere near water (ocean, bay, lake, river) you have probably thought about having a boat. But have you ever thought about building your own boat? I had never really considered it until I came across this site:

Free boat pl a ns

There are three things that amazed me:

When you start poking around on the Web, you can find thousands of different boat plans
The process of building a boat is fairly straightforward and fairly inexpensive
Boats come in an infinite number of shapes and sizes.

While these plans are not free, they often come from free sources and a little Googling can reveal a free version:

Sailboats & Auxiliaries 22′ TO 30′

You can find plans for 20+ foot sailboats that sleep two, built from plywood. At the other end of the spectrum, here is a catamaran made of PVC pipe and scrap wood:

[You can skip the first 2:15 of this video to get straight to the plans]

Here’s real-life experience building a portable folding boat from plans in “The Boy Mechanic”:

If you have ever considered building your own boat – if the thought has ever flitted through your head for even a second – you owe it to yourself to jump into Google and YouTube and look for plans. It is amazing what is out there.

Other House Ideas

A different way to build a house #24 – The Future of Houses, The House of the Future
A different way to build a house #25 – The Passive House
A different way to build a house #26 – John Travolta’s Airplane House
A different way to build a house #27 – The Sliding House
A different way to build a house #28 – floating houses
A different way to build a house #29 – The folding home
A different way to build a house #30 – Billionaires’ Homes
A different way to build a house #31 – Concrete House
A different way to build a house #32 – Capsule Apartments
A different way to build a house #33 – Prefab Duplex
A different way to build a house #34 – bridge house
A different way to build a house #35 – Tiny houses
A different way to build a house #36 – Zero-energy and Triple-zero-houses
A different way to build a house #37 – Build a house that is really thin
A different way to build a house #38 – Foam and steel construction makes a quick, inexpensive, super-efficient house
A different way to build a house #40 – The capsule
A different way to build a house #41 – The ultra-secure house
A different way to build a house #42: Print it
A Different Way to Build a House #43: Add Secret Passages and Hidden Rooms to your house!
A different way to build a house #44 – Display your finest car in the living room
A different way to build a house #45 – Build yourself an Earthship for an ultra-sustainable green lifestyle
A different way to build a house #46 – How to add an elevator to your home
A different way to build a house #47 – underground and able to ride out “the apocalypse”
A different way to build a house #48 – design your own house like an architect
A different way to build a house #49 – A tiny apartment with moving walls becomes 24 different spaces
A different way to build a house #50 – Build yourself a Ninja house, or add Ninja features to an existing home
A different way to build a house #51 – An inexpensive home using recycled wood and natural materials
A different way to build a house #52 – The flat pack house
A different way to build a house #53 – inexpensive housing for the developing world
A different way to build a house #54 – Log homes
A different way to build a house #55 – Lustron homes – Amazing steel prefabs from 1950
A different way to build a house #56 – Buckminster Fuller’s Dymaxion pre-fab house from the 1930s
A different way to build a house #57 – Using an RV as a home
A different way to build a house #58 – Virginia Tech’s LumenHaus
A different way to build a house #59 – Making the most of small apartment spaces
A different way to build a house #60 – Building custom houses from laser-cut plywood
A different way to build a house #61 – Building a house for $3,500
A Different Way To Build a House #62 – Cross Laminated Timber (CLT) construction
A Different Way To Build a House #63 – An 1,000 square foot 2-bedroom apartment shrunk into 420 square feet
A different way to build a house #64 – Fitting your whole life in a 90 square foot apartment
How to build your own automatic Star Trek door for your home
How to build an underground fallout shelter to ride out the apocalypse
The $300 House competition
Free Boat Plans
How to live in your car

Free Boat Plans

Begin Boating
Boating Terms
Ropes and Rigs
Just for Fun
Celestial Navigation
Passage Planning
VHF Marine Radio
Boatbuilding Tips
Stitch and Glue
Epoxy Resin

A selection of Free Boat Plans that can be viewed and / or downloaded.

These free to download wooden boat plans (pdf) were first published in magazines such as "Popular Mechanics", "Popular Science" and the "Boat Builder's Handbook".

Rowing Boats
Sailing Boats

Back Issues for Sale

"Popular Science" magazine and "Popular Mechanics" back issues can be viewed online at Google Books.

All these free boat plans can be built by anyone with a common sense modicum and a few basic woodworking skills and tools. However, if you have not got the skills and tools yet, this is a great way to acquire them.

One of the beauties of building yourself is that you do not have to buy everything at once, just get what you need when you can afford it.

While some of the instructions suggest using exterior plywood, I would always recommend using marine grade.

If you need help with lofting out the plans click here for an article here which should help.

Canoe Free Boat Plans

Combining the features of both kayak and canoe, "Blue Bill" is for those out-of-doors-men who hunt or the sportsmen who need an ultra-light-weight portable boat for use upon any waters.

Besides being usable to build a double-end paddling model, a few changes permit the plans to be used for making a canoe that will accommodate outboard motors up to 6 hp. for swift, speedy transportation on any stream or waterway.

Weighing only 75 lbs. complete, "Blue Bill" is easily transported atop an auto anywhere.

Click Here for the Plans

This kayak is the answer for young people who want to build an inexpensive boat for summer fun. A shop full of power tools is not necessary, either. All the work can be done with ordinary hand tools and a few C clamps. This Free Boat Plan will carry one adult but it's handiest when paddled by a youngster. The boat is stable in the water and, even though it can be turned over, it will not sink. It's also light enough to be carried with ease. Building is so simple that the 'Jig' consists of only two blocks and a few bricks.

Hunting Kayak

For many years a favorite of hunters, trappers and traders the kayak now is as popular with Europeans as the outboard boat is with Americans.

Although this boat was designed to carry two people, it will accommodate three in a pinch and gear may be stowed under fore and after decks.

A few strokes with the double paddle will send it gliding across the water with the minimum of effort on your part.

Kayaks are surprisingly seaworthy, too — more stable than a canoe, in fact, because the occupants sit on the bottom of the hull which lowers the center of gravity.

Pintail and 10ft Duck Boat

'Pintail' drawn from plans by Wm D Jackson is another of the Free Boat Plans from the 'Boat Builder Handbook'. This one is being built by Greg Allore .

If you have ever struggled with the oars of a heavy, slow-moving rowboat and then paddled a swift, high maneuverable canoe you can appreciate why many true sportsmen prefer canoes.

But, too often, the multi-ribbed conventional canoe is not only hard to build but too thin-skinned for hard usage.

This Free Boat Plan teams up plywood and fiberglass to produce a tough, scrape-proof canoe you can build in one-tenth the time it would take you to turn out a conventional canoe.

The use of only one frame offsets the extra weight of using plywood, so that this canoe is still light enough for comfortable portage.

Little Chief

Little Chief is a canoe with many virtues, ideally adapted to quick, easy construction.

Canoes are not easy to build, but here is one Free Boat Plan that can be made of ordinary materials for a fraction of the cost of conventional canoes.

It has attractive molded lines and may be built either as a paddling model or, with slight changes, adapted for use with small outboard motors.

In all countries of the world, particularly the United States, the kayak is enjoying newfound popularity.

Here's a nimble, lightweight craft that has its roots in the Arctic as a basic instrument of survival, yet is branching out as a modern outdoor sport on our own rivers and lakes.

To the Eskimo, a kayak is more than a boat.

When he's laced into his whale-bone and walrus-hide craft, he's ready for anything in the way of water or weather.

To most of us, however, a kayak is pure adventure and fun.

It's perfect for poking around uninhabited Islands, exploring the bends of a lazy, winding river, or just breaking the peaceful surface of a placid lake at sunset.

Redwood Canoe

You can build this 74lb, 16 foot canoe using redwood strips, an old boat-building technique.

Two persons can sit side by side in the center with one person at each end and plenty of room for gear.

This canoe is formed around plywood templates using redwood strips glued edge to edge.

You lay up the strips, remove the form, and the canoe is complete, except for fiberglassing and putting in the seats.

The plans can also be used to build a 13-foot version of this strip planked canoe.

or Click Here for the Free Plans

Houseboat Free boat Plans

Budget houseboat (trailerable).

The Budget Houseboat is like a camper that goes on water.

She's 20 ft. long with a 9-ft. beam, containing 300 sq. ft. of usable floor area.

This means that while she can accommodate two in outrageous comfort, she can easily take a family of four on an extended vacation and be entirely self-contained.

There are two full-size permanent bunks in the forward section of the cabin.

The dining table, in the rear section of the cabin, seats four and then drops down to convert into an extra bunk 6 ft. 4 in. long and 38 in. wide.

Cabin headroom is 6 ft. 2 in., and two cots can be stationed to the rear of the cabin area.

Bayou Belle

Bayou Belle is a 25' scow that can be built as a sports utility, a fishing boat, or a houseboat, depending on your requirements for pleasure offshore.

As a sports utility, she can be used for towing water skiers and for cruising, as a fishing boat, she offers a stable platform with plenty of elbow room and stowage space.

As a houseboat, she has roomy interior accommodations for a leisurely life afloat.

Construction of Bayou Belle makes use of prefabricated sections, which means that much of the work can be done indoors in the average garage during the cold winter months, and the boat completed outdoors in time for launching in late spring.

Float-A-Home

A houseboat is a unique water craft in that it combines most of the comforts of home with the mobility of a boat.

Of course, use is limited to sheltered waters, and speeds are slow in comparison to more sea worthy vessels.

Float-A-Home is a 21-footer that provides plenty of living space for three or four persons.

An extremely simple houseboat to build, the free boat plans feature a strong hull with a heavy keel and close-spaced framing.

This, coupled with a relatively low profile, makes it a very stable craft.

Click Here for the free Plans

See What Others Have Posted

Recent Articles

International boat show returns to Gull Lake

Sep 17, 24 12:52 PM

Vintage boats are on display in front of Bar Harbor Supper Club during the Antique and Classic Boat Society International Boat Show on Saturday, Sept. 14, 2024, on Gull Lake in Lake Shore.

International boat show returns to Gull Lake Photos and video of the Antique & Classic Boat Society International Boat Show at Bar Harbor

Continue reading "International boat show returns to Gull Lak…

Boat Plan Books
Glass Cloth
Strip Plank

You might like these

The Ashcroft Method of Planking a Wooden Boat

The Ashcroft method of building small wooden boats, an early from of cold moulding using thin layers of wood with the layers all running same direction.

Knotty wood, problems with boat building timber.

Knotty wood, how to avoid structural problems with knots in lumber when using softwood timber for fitting out and boat joinery

Build a Boat, tips for the DIY Wooden Boat Builder.

How to Build a Boat, Wooden Boat Building methods for the DIY, backyard, self-builders explained, carvel, lapstrake and plywood

Wood Screws for Boat Building and Repair.

Wood Screws are the most widely used and versatile fasteners used on wooden boats. Which type to use and how to use them

Wood, Environmentally Friendly Boat Building Lumber.

Make sure that the Wood that you buy and use is sustainably grown and harvested.

Timber, Lumber for Boat Building.

A brief description of the most common Timber used for building Wooden Boats how to choose wood for your project boat

Timber Properties

A brief guide to timber properties and wood, characteristics such as strength, stiffness and elasticity for choosing lumber for wooden boat building and restoration.

Rivets and Copper Rove Wood Boat Fastenings.

How to use Copper Rivets and Roves construction guide to fasteners on your wooden boat.

Ring Nails for Marine Fastening.

Ring Nails sometimes call Gripfast or ring shank, silicon bronze boat nails are renowned for their holding power. but how to get them out?

Plywood and Veneer Guide for Marine use.

A guide to plywood for boat building and why you should use the best marine grade you can afford.

A Classic Tradition

Sep 17, 24 12:35 PM

A Classic Tradition The Camden Classics Cup couples regatta racing with a celebration of the town’s heritage

Continue reading "A Classic Tradition"

Antique and Classic Boat Society International Boat Show 2024 klick! Gallery

Sep 17, 24 12:26 PM

Continue reading "Antique and Classic Boat Society International Boat Show 2024 klick! Gallery"

Wooden Boat Restoration, Repair and Maintainence.

Wooden boat restoration, how to fix up an old wooden boat, one of the cheapest ways to get afloat and have a boat to be proud of.

Epoxy Resin for DIY Wooden Boat Building.

A guide to the epoxy resins and sustainable enrtopy resins to use when building wooden boats with marine plywood.

Wood Rot Repair and Treatment

Wood rot in wooden boats, how to treat, repair and replace rotten timbers in a wooden boat

Vintage wood Boat Bottom Replacement

The ultimate bottom repair for a vintage wood boat, when re-caulking the planking on your classic antique boat

Surveying a wood boat

The problem areas to look out for when surveying an old wooden boat.

Initial Boat Survey Checklist

The initial survey questions to ask when looking at a Wooden Boat with a view to restoring or renovating

Stem and Stern Post Rebuilding

Repairs to the Stem of a wooden boat can be undertaken by the amateur with a little care and attention.

Planking a Carvel Boat

How to replace damaged or unsound carvel Planking, a guide for any reasonably competent amateur.

Iron Keel Rust Removal

Keel rust, how to remove rust from an iron keel and treat it prior to repainting your wooden boat restoration project.

Wedge Seam Construction

Wedge Seam Construction method for wooden boat building and glued wedging or ‘splining’ as a restoration technique for restoring old carvel planking seams.

Advertising Policy

Cookie Policy

I am perfectly aware that the majority of Wooden Boat aficionados are sensible folk. However, I need to point out that I am an amateur wooden boat enthusiast simply writing in order to try to help other amateur wooden boat enthusiasts. And while I take every care to ensure that the information in DIY Wood Boat.com is correct, anyone acting on the information on this website does so at their own risk.

Row boat plans

Sailboat plans

Power boat plans

Design	Sail area	Engine power
by Mike Waller Yacht Design 'Nutshell' style sailing dingy for 1 or 2 people		-
by Chesapeake Light Craft Ultra-light Sailing Dinghy		-
by Chesapeake Light Craft Ultra-light Sailing Nesting Dinghy		-

by Bateau.com [D5] Pram type dinghy. Oars, sail or outboard		2
by Dudley Dix 3:1 plywood dinghie		-
by Chesapeake Marine Design 9 ft sailing skiff		-
by John Welsford A miniature flattie for the kids		-
by Woods Designs 10ft Sail/Row Dinghy (with nesting option)		2.5hp max
by Dudley Dix 3:1 plywood dinghie		-
by John Welsford Daniel was about 12 and deserved his own boat		-
by Bateau.com [CR11] a sturdy but performant small boat, an ideal first sailboat for one or two people		-
by Chesapeake Marine Design 11 ft sailing double ender		-
by John Welsford Sailing with stability and the most fun you can have without getting wet		-
by Chesapeake Light Craft Handy boat that can be rowed, sailed, and powered with up to three large adults		2 - 4
by Bateau.com [C12] A fast but stable cat boat		-

by Bateau.com [D12] Sailing traditional type dory. Oars or sail		-
by Chesapeake Marine Design Handy-sized skiff for rowing and sailing		-
by John Welsford General purpose dinghy. Sail her, go fishing, or go exploring under oars		-
by John Welsford You liked the kids Optimus trainers, here's a grownup version		-
by John Welsford Sporting sailor with a lot of performance for the money		-
by Bateau.com [CR13] Ideal for two or three people but easily handled by a solo sailor		-
by John Welsford The littlest practical cabin cruising yacht		-
by Dudley Dix Plywood Lapstrake Sailing Dinghy		up to 8
by John Welsford Serious, a sailing dinghy with space to sleep two or daysail four		-
by Dudley Dix Plywood stitch & glue sailing skiff		-
by Woods Designs 14ft high performance racing dinghy		-
by Woods Designs 14ft fun beach catamaran		-
by Woods Designs 14ft single trapeze beach catamaran		-
by Bateau.com [MF14] A lateen rigged board boat		-
by Bateau.com [CV16] Daysailor, club training boat		up to 6
by Bateau.com [AD14] A mini cruiser for coastal cruising and occasional short offshore passages		-
by John Welsford A daysailer with sneaky speed		-
by John Welsford A really popular daysailer and cruising dinghy		-
by John Welsford A tough little cruiser for one or two		-
by Chesapeake Light Craft 15-foot Fast-Sailing Pocket Cruiser with Sitting Headroom and 8-foot Berths		-
by Dudley Dix Radius chine plywood mini sportboat		-
by Chesapeake Light Craft 15-foot Double-Ender - Fast Rowing and Sailing Dinghy		-
by Chesapeake Marine Design Skiff for sailing and rowing		2 - 5
by Chesapeake Marine Design Daysailer/Beach Cruiser		-
by B&B Yacht Designs Cat ketch beach cruiser		2 - 10
by Chesapeake Marine Design Daysailer		-
by Dudley Dix Plywood Sailing Dinghy		up to 10
by Bateau.com [AR15] A performance sailing dinghy		-
by B&B Yacht Designs A daysailer that combines classic panache with attitude		-
by Chesapeake Marine Design Sailing camp cruiser		-
by Bateau.com [AD16] A mini cruiser for coastal cruising and occasional short offshore passages		-
by John Welsford A Cruising Dinghy for the Maine Island trail		-
by John Welsford Family Daysailer or Adventure Cruiser		-
by Woods Designs 16ft twin trapeze beach catamaran		-
by Chesapeake Marine Design Daysailer/Camp Cruiser		-
by John Welsford Speed, but not at the expense of comfort		-
by John Welsford Trailerable Coastal Cruiser		2 - 6
by B&B Yacht Designs Cat ketch beach cruiser		-
by Chesapeake Light Craft Light-weight Rowing and Sailing Dory That You Can Build		-
by Chesapeake Marine Design Daysailer/Beach Cruiser		-
by John Welsford A smaller plywood version of the English surfboat: row, motor, or sail her	-	-
by John Welsford Bigger Navigator		-
by John Welsford A Performance sloop or a cruising yawl with two bunks and a space for the cooke		-
by Mike Waller Yacht Design 17 ft fast trailer yacht in moulded timber or strip plank WRC		-
by Mike Waller Yacht Design 17 ft multichine plywood version of the TS 5.4 trailer yacht		-
by Bateau.com [CK17] A roomy and fast expedition cat ketch		-
by Chesapeake Marine Design Daysailer/Pocket Cruiser		-
by Chesapeake Marine Design Daysailer		-
by John Welsford A mighty, miniature long range cruiser		-
by Bateau.com [SB18] A trailerable high performance sail boat with lifting keel		2 - 4
by Watershed Sailboats Annoyingly fast sport boat		-
by Chesapeake Light Craft A Lightweight, Fast-Sailing Sharpie		-
by Bateau.com [VG18] A fast day sailor with cabin		3 - 6
by Chesapeake Marine Design Daysailer/Pocket Cruiser		-
by Mike Waller Yacht Design 17 ft Trailer Sharpie - Traditional design		-
by John Welsford A clinker built double ender in the traditional Navy style		-
by Bateau.com [VG20] A 4 berths able cruiser, two keel versions		3 - 10
by Woods Designs Simple 2 berth trailable catamaran with hard chine hulls		-
by John Welsford A classic trailer yacht with serious space inside		-
by Chesapeake Marine Design Daysailer/Cuddy Cruiser		-
by Dudley Dix Radius chine plywood Mini 650		-
by Dudley Dix Radius chine plywood Mini 650		-
by Dudley Dix Radius chine plywood mini cruiser		-
by Dudley Dix Radius chine plywood mini cruiser		-
by Woods Designs Simple 4 berth trailable cat with dory hulls		-
by Woods Designs Folding trailable catamaran with central cuddy		-
by Mike Waller Yacht Design 22 ft multichine ply. trailerable catamaran with cabin		-
by Dudley Dix Plywood Lapstrake Traditional Trailer-sailer		6
by Mike Waller Yacht Design 23 ft fast trailer yacht in WRC strip plank and plywood		-
by John Welsford Ocean going, small and affordable, and exceptionally tough		6 - 12
by Dudley Dix Radius chine plywood trailer-sailer		10
by Bateau.com [VG23] Offshore and coastal fast cruiser with accommodations for four. Shallow draft, trailerable		5 - 10
by Woods Designs The "Classic" trailable catamaran		-
by Woods Designs A detuned Strider with LAR keels		-
by Chesapeake Marine Design Sailing sharpie cruiser		-
by Chesapeake Marine Design Sailing Pocket Cruiser		-
by Chesapeake Marine Design Daysailer / Camp cruiser		-
by Dudley Dix Plywood Lapstrake Traditional Trailer-sailer		6
by Woods Designs High performance trailable catamaran		-
by Mike Waller Yacht Design 24.6 ft multichine ply. wide load trailerable catamaran with cabin		-
by Chesapeake Marine Design Double-ended sailing cruiser		-
by Woods Designs A compromise between Gwahir and Strider		-
by Woods Designs Folding trailable cat with central cuddy. 7.65m version of Wizard		-
by Mike Waller Yacht Design 25 ft plywood 'V' hull low cost cruising catamaran		-
by Mike Waller Yacht Design 26 ft Trailer Sharpie - Modern design		-
by Dudley Dix Radius chine plywood trailer-sailer		10
by Bateau.com [VG26] An offshore capable cruising boat with shallow draft		6 - 15
by Woods Designs 8.3m deep V cruiser		-
by Dudley Dix Radius chine plywood maxi trailer-sailer		10
by Woods Designs Budget Offshore Cruiser with central cuddy		-
by Chesapeake Marine Design Extended sailing cruiser		10 - 15
by Dudley Dix Plywood Lapstrake Trailable Gaff Cutter		8
by Woods Designs 8.8m hard chine performance cruiser with central cuddy		8-10
by Chesapeake Marine Design Power cruiser / Trawler / Motorsailer		40 - 60
by Mike Waller Yacht Design 29 ft cedar strip / glass bridgedeck catamaran		-
by Dudley Dix Radius chine plywood trailer-sailer		-
by Woods Designs 9m trailable coastal cruiser/racer		-
by Chesapeake Marine Design Motor sailer		20 - 40
by Woods Designs 9m round bilge performance cruiser		-
by Chesapeake Marine Design Shallow draft sailing yacht		-
by Chesapeake Marine Design Sailing cutter		-
by Woods Designs 9m deep V hull ocean cruiser		-
by Dudley Dix GRP or timber or plywood cruiser		-
by Mike Waller Yacht Design 31 ft plywood bridge deck cruising catamaran		2 x 9-10
by Dudley Dix Radius chine plywood Class 950		-
by Dudley Dix Radius chine plywood racer		10
by Chesapeake Marine Design Sailing Cruiser		25
by Woods Designs 9.9m performance cruiser		9.9
by Dudley Dix Multi-chine plywood sloop		10 - 20
by Woods Designs 10.5m cruiser with central cuddy		-
by Woods Designs 10.4m family ocean cruiser		2 x 9-18
by Woods Designs 10.4m performance cruiser		-
by Dudley Dix Radius chine plywood cruiser racer		15 - 25
by Woods Designs 10.65m deep V hull open deck ocean cruiser		-
by Woods Designs 10.65m performance cruiser		-
by Mike Waller Yacht Design (35 ft plywood 'V' hull low cost cruising catamaran		-
by Mike Waller Yacht Design 36 ft all plywood bridgedeck cruising catamaran		-
by Chesapeake Marine Design Sailing Cruiser		40
by Woods Designs 10.9m hard chine open deck cruiser		-
by Dudley Dix Radius chine plywood cruiser racer		15 - 25
by Mike Waller Yacht Design 38 ft cedar strip / glass bridgedeck catamaran		-
by Mike Waller Yacht Design 39 ft cedar/glass composite and ply catamaran		-
by Dudley Dix GRP, timber or plywood sloop		20 - 30
by Dudley Dix GRP, aluminum or timber Classic Cruiser		35 - 50
by Dudley Dix Radius chine plywood cruiser racer		15 - 25
by Mike Waller Yacht Design 40 ft plywood multi chine low cost cruising catamaran		2 x 10
by Woods Designs Open deck performance cruiser		2 x 9.9
by Woods Designs Round bilge bridge deck cabin cruiser		2 x 27
by Woods Designs Performance cruiser with central cuddy		-
by Woods Designs V hull open deck cruiser		-
by Woods Designs Round bilge full bridgedeck cabin cruiser		-
by Mike Waller Yacht Design 48.5 ft cedar strip / glass cruising catamaran		2 x 50
by Dudley Dix GRP or wood classic cruiser		50 - 60

Questions? Suggestions? Contact us at: [email protected]

The designs where there is a YELLOW BACKGROUND are the designs for which CUTTING FILES are available.

Several versions.

Several versions in one set of BOAT PLANS. or

- WOOD EPOXY

NEW TOTALLY REVISED

ALUMINUM

Fast cruising

- BOAT PLANS & CUTTING FILES if you are interested in this design.
or


or



or
or
or

STEEL OR ALUMINUM

or

Several versions. or

RETURN TO HOME PAGE

intheboatshed.net

Gavin Atkin's weblog for the sort of people who like looking inside boat sheds. It's about old boats, traditional boats, boat building, restoration, the sea and the North Kent Coast

Free boat plans

SCROLL DOWN THIS PAGE FOR MANY MORE PLANS

This a page of links to some favourite free boat plans at intheboatshed.net . They’ve been chosen because they are derived from traditional boats, or in some cases simply for their usefulness. There are quite a few here, but you’ll find still more in the intheboatshed.net weblog using the search gadget. If you find anything you feel I should add, please let me know at [email protected] .

PLEASE ALWAYS USE THE LATEST VERSION WHICH WILL CONTAIN ANY CORRECTIONS THAT HAVE BEEN BROUGHT TO THE DESIGNERS ATTENTION.

boat plans, outboard boat plans, boat building plans

Brian King’s Barton skiff during construction:

See a short video of Brian’s boat in action using a 3.5hp outboard at 6knots or so. Note the near complete lack of wake, which should indicate that the boat’s working efficiently.

– The 14ft Sunny skiff – get the plans for this easy to build lightweight rowing boat here .

free boat plans, rowing boat plans, free boatbuilding plans, lightweight rowing boat

Sunny skiff lightweight plywood rowing dinghy

– The 12ft Ella skiff – get the plans for this easy to build lightweight rowing boat here .

boat plans, boatbuilding plans, rowing boat plans, sailing boat plans, lightweight rowing boat

– The sailing version of the Ella skiff – get the plans here (now in version 1.2).

free boat plans, free boatbuilding plans

The sailing version of the 12ft Ella skiff

Ben Crawshaw sails the Ella skiff

– The intheboatshed.net Julie 15ft 7in flat bottomed rowing skiff

Additional measurements for building a strongback – if that’s the approach you prefer
Complete free plans package for the intheboatshed.net flat-bottomed 15ft 6in skiff
intheboatshed.net skiff – drawings and coordinates for stitch and glue
intheboatshed.net skiff – photos of our model, and maybe yours too?
intheboatshed.net skiff – now we can make a model
intheboatshed.net skiff progress
Early drawings for a 15ft 5in lightweight flat-bottomed American-style skiff

Light Trow model package plywood boat Gavin Atkin boat plan

The Mk 2 Light Trow – click on the photo for a larger image

See a clip of the Light Trow sailing:

Download the Mk 2 Light Trow plans , and the model-making plans (making a model to be an important preparation for making this kind of boat). Alain Yvorra sent over photographs of a model he has made:

Alain wrote: ‘The design and plan made things very easy to follow, and the building of the model was a breath of fresh air, bringing, as I saw it coming together, quite a wonderful satisfaction.’

Also, see Ben Crawshaw’s excellent weblog about building and then cruising the Light Trow on the Spanish coast; also, read about the original trows : The Fleet Trow

– The Cinderella canoe

Al Burke’s Cinderella

Al’s comments following his first test were interesting: ‘A successful design that is an absolute delight to paddle and which brought comments like “beautiful lines” and “do you want to sell it?” from people on the beach watching the test.’

I think this is a nice small open paddler, but bouyancy tanks or bags would be a essential if you’re going to do more than paddle in narrow rivers or small shallow lakes.

See: A Cinderella canoe adapted for rowing Plans for building the Cinderella: Cinderella download

– The Light Dinghy

Light Dinghy – click on the drawing for a larger image

For more on this boat, see:

From dinghies to the Architectura Navalis and back
Tempting plans for the boat-dreaming season, part III

– Doris the Dory

Plans for building Doris the Dory: Doris the Dory download

– The Forest & Stream skiff

Forest & Stream skiff in built in Sweden – click on the photo for a larger image – see the post: A little classic to build this spring

– The small Bluestone schooner : My Bluestone schooner design in the spotlight and the download including the chine version

Free designs from other designers

– A 12ft ply-built Fleet trow

Boat Building Academy Lyme Regis launch 2014 photographs

Photos by Jenny Steer and Derek Thompson

Offsets kindly provided by the Boat Building Academy folks at the bottom of this post

– A sailing Duck Punt, as raced on the English East Coast

Plans for John Milgate’s Duck Punt

– The South Haven Dory

Build the South Haven Dory

– International 12 dinghy George Cockshott’s sweet 12-foot dinghy

– Chuck Merrell’s Apple Pie

Temptations part V: a dinghy so small, your family will hardly notice…

– Canvas canoe How to build a canvas canoe – Hannu Vartiala’s coracle Hannu Vartiala’s website changes address

-The Brockway skiff

Build the Brockway skiff

– Wolfgang Brink’s Greenland Kayak

How to build a Greenland kayak

– An alternative folding boat

An alternative folding boat – Boat plans from Practical Boatbuilding for Amateurs , including the 10ft double-ended skiff, various punts etc Practical Boat Building for Amateurs

– Thames skiff and racing punt At last – free online designs for a skiff and a racing punt

– Howard Irving Chappelle’s traditional 14ft skiff Chappelle’s 14ft skiff – another candidate for the 2008 boatbuilding season?

– Mark Wallace’s Black Skiff

Boatbuilding plans for the Black Skiff have been designed and made available for free by Mark Wallace – he says all he asks for is to be given the credit for designing the boat.

I think it’s an elegant design. The plans are not likely to be the easiest for first-time boatbuilders to follow, but it would be well worth picking the required skills up by reading one of the classic books on this kind of boatbuilding. See the Intheboatshed.net Amazon bookshop for something suitable.

Mark ways she’s a strong light-weight boat loosely with strong links to Scandinavian types. She proven to be an excellent rower, has a capacity of four adults and has a flat bottom for easy beaching.

Go to Mark’s website for more information and plans in pdf format: http://www.markwallaceshipwright.com/plans.html

By the way, don’t miss Mark’s impressive collection of testimonials .

Boat Plans, Patterns and Supplies For the Amateur Boat Builder!

Boat Plans Catalog â€“ 300 Boats You Can Build!
Boatbuilding Supplies & Epoxy
Inboard Hardware
Electrical Design Plans
Books, DVD’s & Audio
Boat Trailer Plans
RaptorÂ® Fastenings & Tools
Glen-L RV Plans
Gift Certificates
Boatbuilder Blogs
Boatbuilder Galleries
Newsletter Archives
Customer Photos Archives
Where Do I Start…
About Our Plans & Kits
Boatbuilder Forum
Boatbuilder Gatherings
Boatbuilding Methods
Featured Design on TV’s NCIS
Our Boats in Action

Boat Plans Catalog – 300 Boats You Can Build!

“Building boats from Glen-L plans is simple and straight forward…I honestly have never run into a problem, unless it was of my own making. Follow Glen-L’s plans and you can’t go wrong.” Dr. Norman Cove, Bahamas

“Boat building is one of the few pursuits where utilization of the end product is as rewarding as its construction.” Marc Bourassa, Wilmington, MA (built the Power Skiff and 2 Kidyaks)

With Glen-L proven plans & kits, building your own boat can be a reality. Choose one of the categories below, click on a boat for the listing of items available plus more info and photos. Simple as that… get started today!

If you know the boat design name, use our Alphabetical Design Index

Design Characteristics – Boat drawing with all parts listed.

Order a Hard-copy of the Catalog

Click here for more information about our plans and kits.

One Response to Boat Plans Catalog – 300 Boats You Can Build!

[…] am building a 16′ wooden bass boat using the Glen-L design and it is about 80% complete. I am now getting ready to outfit the interior, build the helm, […]

Connect with us:

Customer builds.

Useful Information

Cost & Time To Build
Links & Suppliers
Online Glossary
Support Knowledge Base
Teleseminars
Wood & Plywood

Building Links

How Fast Does It Go?
Install A Jet Ski Motor
Modifying The Motorwell
Sailboat Hardware Notes

Glen L Marine Design

About Glen L
How To Place an Order
Privacy Policy

Copyright Info.

Mailing Address: 826 East Park Ave. Port Townsend, WA 98368

[email protected]

Web design by Big Guns Marketing , LLC.

ALERT: WAREHOUSE CLOSURE SEPT 21-29. SHIPPING RESUMES SEPT 30th.

Cabin Sailboats to 15'

Plans & Kits
Plans by type
Qty in Cart

Divinité 4-3/4 Study Plans

Divinité 4-3/4 Full Plans

Naut 475 Plans PDF

Fafnir Printed Plans

Souriceau Study Plans

Goose Explorer Full Plans PDF

Lynx 14 Plans

Ptarmigan 15 Plans

Tenten 425 V2 Plans PDF

Souriceau Full Plans

4m mini yacht plans.

IMB Plans PDF

Total: items /
Add all to cart

Adding your products to cart

IMAGES

Free Plans: SMALL SHIPS & BOATS
Weekender Sailboat Plans Free
Free Plywood Sailboat Plans
Small Sailboat Design Plans ~ My Boat Plans
Small Sailboat Design Plans ~ My Boat Plans
Small Sailboat Design Plans ~ My Boat Plans

VIDEO

Free 30' sailboat!
Yellowtail From a Kayak
Sailing, life goals
Sailboat Plans--Daysailers 10 ft to 15 ft LOA
Vintage Sailboat Plans
Boat plans, boat building kits for amateur boat builders

COMMENTS

Free Sailboat Plans
affiliate links Cabin Cruiser, Free Sailboat Plans Petrel You can build this 16ft boat as a day sailer or an overnighter with cabin. Petrel is a Free Sailboat Plan that fulfils the greatest possible variety of uses in one model, offering the builder either an open-cockpit racing craft with comfortable accommodation for day sailing or a snug cabin model with accommodation for overnight trips to ...
15 Free Boat Plans You Can Build This Week (with PDFs)
Because this boat plan is also sturdy enough to handle a small motor, it includes important points for protecting the wooden hull from spark plug damage. Be careful to follow these guidelines to build the safest boat possible if you imagine installing a motor down the line. The Jollyroger. 7. The Cork.
Plans & Kits
Drifter 12L Free Plans. To download these plans, click HERE The Drifter 12 L is a higher performance version of the Drifter 12, with longer amas, and a taller mast. It can be paddled or sailed with as simple rig using a windsurfing mast. The sail rolls up, and is reefable...
Affordable Sailboats You Can Build at Home
Sail Plans. Sail plans are rather inexpensive if you are aiming to build a small boat. These plans allow you to see the workings of the boat design and what you need to build the boat. Without these plans, you will not know the exact details of the design and it can cause major issues with the boat's hull or other areas of the boat.
Build a Small Sailboat Free Plans
Learn how to build a 15 foot knockabout sailboat with these easy plywood plans. See the specific steps and diagrams for cutting, assembling and joining the frames, planks and keel batten.
Free Boat Plans From "Science and Mechanics" Magazines
Plans for Hydroplanes, Sailboats, Inboards, Runabouts, Canoes, Kayaks and many other boats. This is a FREE user supported site. An online library. To contribute just send an "E-mail". There are a few plans that have CAD drawings that users have provided. The few cad files that are available (".dwg" and ".dxf" files) can be viewed and printed ...
Small Boat Plans Catalogue ~ Small Boat Designs by Tad ...
Marjorie 26' Barge. Two sleeping cabins, a head, galley, and a pilothouse. Catalogue of all small boat plans and custom small boat designs by Tad Roberts. Plans for plywood, lapstrake, plank-on-frame, cold-molded, sheath-stripped, and aluminum construction. Free plans for Tern, 24' gaff ketch.
Free boat plans, online boat plan sources, and free CAD boat drawing
Free Boat Plans Free plans from Science and Mechanics and Boat Builders Handbook magazines. (Added: 22-Nov-2001 Hits: 273576) My Links | Rate | Cached | Visit Free Boat Plans. Free Sailboat Plans Free sailboat plans for more than ten designs from 28 feet to over 60 feet long. (Added: 13-Nov-2013 Hits: 53484) My Links | Rate | Cached | Visit ...
All the boat plans on this site. Many free plans
Ultra-Light Boat plans. Imagine building a boat that weights less than 30 pounds and even less. Canoe and Kayak plans. Many free plans included. Tenders. Selection of boats suitable as tenders, some free. Many methods of building including stitch and glue, ultralight and strip building.
Idea 21
Idea 21 is a small offshore capable sailboat with chined hull, lifting keel, trailerable and suitable for club racing or cruising. Plans are available in plywood and epoxy, in Italian and English, and in imperial units upon request.
Lisa B Good
Clearly a boat for sheltered waters. This is one of the 8 detailed drawings included with the free plans. See the full arrangement drawing. The cabin is small but adequate, 9' X 7-6". There's room to set up a fullsized standard double bed, 4'-6" X 6'-6". The galley is compact. The fridge should be an icebox set out on the aft deck.
Sailboat plans 18-24 ft
Sailboat plans; Power boat plans; Home Plans Sailboat plans; 18-24 ft Sailboat plans 18-24 ft. Design Length Beam Sail area Engine power Compare; Swaggie by ... Ocean going, small and affordable, and exceptionally tough 23' 7 m: 9' 2" 2.8 m: 382 sq. ft. 35.50 m 2: 6 - 12 ...
Free model boat plans: the MiniX, an easy-to-build radio-controlled
A basic radio control kit is powerful enough to handle "small" sail surfaces. Resembling a sailboat at best, hence the presence of the deckhouse and cockpit. These two elements give a sense of scale without resorting to model-building. ... Free model boat plans: the MiniX, an easy-to-build radio-controlled sailboat
Plywood Boat Plans
Buy Canoe Plan - $75. Light and lovely to paddle. Simple Plywood Boat Plan. Light on the land, Prettiest Plywood or wooden Canoes anywhere. 15.5ft. Excellent distance touring boats. 15'6″, simple construction for a wooden canoe. 32 - 45lbs (15 to 20kg) Click here for a comparison between our paddling canoe plans.
Build your own boat of almost any shape and size using free plans
Boats come in an infinite number of shapes and sizes. While these plans are not free, they often come from free sources and a little Googling can reveal a free version: Sailboats & Auxiliaries 22′ TO 30′. You can find plans for 20+ foot sailboats that sleep two, built from plywood.
One Sheet Skiff Free Plans
2) Make stem cut bevels at 33 degrees. 3) Attach sides to stem: 4) Build transom and frame: (you will round off the top of the transom after you have attached the sides and gunwales) 5) Attach sides to frame and transom: Test fitting first is a good plan: 6) Cut 1x2 as shown on drawings and install chine logs.
Free Boat Plans
Free Boat Plans. A selection of Free Boat Plans that can be viewed and / or downloaded. These free to download wooden boat plans (pdf) were first published in magazines such as "Popular Mechanics", "Popular Science" and the "Boat Builder's Handbook". "Popular Science" magazine and "Popular Mechanics" back issues can be viewed online at Google ...
Sailboat plans
Sailboat plans. Design Length Beam Sail area Engine power Compare; Pippie 8 Sailing Trainer by Mike Waller Yacht Design 'Nutshell' style sailing dingy for 1 or 2 people ... [CR11] a sturdy but performant small boat, an ideal first sailboat for one or two people 10' 9" 3.28 m: 4' 4" 1.31 m: 55 sq. ft. 5.10 ...
Scroll Down for 100 Sailboat Plans & Kits
BOAT PLANS & FULL SIZE PATTERNS - Package Includes latest sail boat plans, SAILBOAT building plan updates & revisions, PLUS direct contact with the designer. With over 600 completed at last count, the Spray 33 along with her larger sister the Spray 36 is one of our all time most popular designs.
Free boat plans
Boats designed by Gavin Atkin - The Barton skiff, a low powered outboard skiff - get the plans here. The Barton skiff - click on the thumbnail for a larger drawing. Brian King's Barton skiff during construction: See a short video of Brian's boat in action using a 3.5hp outboard at 6knots or so. Note the near complete lack of wake, which should indicate that the boat's working ...
Gill 12 Tugboat Free Plans
Please note Mike Gill is an amateur small boat designer and like many of us, has no formal naval engineering background. But he has designed a cute little boat and has generously agreed to offer the plans for free here. Included in the zipped folder are: the building sequence (below) 13 construction photos. 9 drawings or dimensioned photos.
300 Boats You Can Build!
Dr. Norman Cove, Bahamas. "Boat building is one of the few pursuits where utilization of the end product is as rewarding as its construction.". Marc Bourassa, Wilmington, MA (built the Power Skiff and 2 Kidyaks) With Glen-L proven plans & kits, building your own boat can be a reality. Choose one of the categories below, click on a boat for ...
Plans & Kits
A small, simple, seaworthy microcruiser For Souriceau Study Plans, click HERE There are 3 versions of this boat: -1- Standard rig / Retractable vertical keel -2- Furling rig / Retractable vertical keel -3- Furling rig / Bilge keel Comments about...

15 Free Boat Plans You Can Build This Week (with PDFs)

Free Boat Plans

Why Build Your Own Boat?

Free Boat Plans You Can Build This Week (with PDFs)

2. The Mouse

3. The Slipper

4. The Handy Andy

5. The Junior

6. The Jolly Roger

7. The Cork

8. The Hobby Kat

9. The Tern

10. The Falcon

11. The White Duck

12. The Sea Midge

13. The Zephyr

14. The Gypsy

15. The Crazy Cardboard Boat

15 Free Boat Plans You Can Build This Week (with PDFs) – Final Thoughts

Enjoyed 15 Free Boat Plans You Can Build This Week (with PDFs)? Share it with your friends so they too can follow the Kayakhelp journey.

More to explorer

The Pintail Canoe Plan – Free Download

The Redwood Canoe Plan – Free Download

The Crazy Cardboard Boat Plan – Free Download

‍ Top 10 Affordable Sailboats Anyone Can Build at Home

B&B Yachts

Brooks Boat Designs

Chase Small Craft

Chesapeake Light Craft

Dudley Dix Yacht Design

Farrier Marine

Glen-L Marine Designs

John Welsford Boat Designs

Iain Oughtred

Paul Gartside Boat Builder and Designer

How Much Does it Cost to Build a Sailboat at Home?

Price Per Square Foot

Boat Designs Matter

Kits Can Differ

Construction Approaches

How Long Does it Take to Build a Sailboat?

Time Varies

Complexity of Design

Quality Materials

Most Recent

Best Small Sailboat Ornaments

Best Small Sailboats With Standing Headroom

Similar Posts

Discover the Magic of Hydrofoil Sailboats

Best Bluewater Sailboats Under $50K

Hunter Sailboats: Are They Built for Bluewater Cruising?

Popular Posts

Best Liveaboard Catamaran Sailboats

Can a Novice Sail Around the World?

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

7 Best Places To Liveaboard A Sailboat

Great Projects

Related Plans

All Our Vintage Projects Categories

Discussion Forum

Plans for Boats, oars and paddles. Many free plans

Links to All kinds of boat plans, oars, some free plans

Free Boat Plans

Free Canoe and Paddle Plans some links some actual plans

Surf Boards and Paddle Boards

Multihulls and Proas

House Boats

Idea 21 sportboat

First boat launched : read the first impressions here

Free model boat plans: the MiniX, an easy-to-build radio-controlled sailboat

An easy-to-build, eye-catching, high-performance sailboat

Modern construction

Technical data

MiniX drawings

The construction budget

LIST of WOODEN BOAT PLANS – By Michael Storer

Viola 14 Sailing Canoe Boat Plan

16ft Kombi Sail and Paddle Canoe Plan